Furrion Aurora Smart 4K UHD Partial Sun Outdoor TV
Quick Start Guide
Model: FDUP50Y1A (Lippert PN: 2022260467)
What's in the Box
- Furrion Aurora Smart 4K UHD Outdoor TV
- Quick Start Guide
- Warning Card
- Warranty Manual
- Screws: M6*15mm x 4
- Screw Adapters: x 4
Connect
⚠️ WARNING: Do not connect the power source before making connections. Open the media bay to connect the cables.
ℹ️ NOTE: All external devices and cables shown in the diagram are for reference only and not included in the package.
Port Descriptions:
- USB1 / USB2: DC 5V 500mA
- HDMI1, HDMI2 (ARC), HDMI3: For connecting video and audio sources.
- LAN: For network connection.
- OPTICAL OUT: For digital audio output.
- AUDIO R-IN-L: For analog audio input (Right and Left channels).
- VIDEO IN: For composite video input.
- RF IN: For antenna or cable input.
Connection Diagram Description:
The rear panel of the 50" TV is shown, illustrating the placement of various ports including USB, HDMI, LAN, Optical Out, Audio In, Video In, and RF In. Cables are depicted connecting various external devices (like a router, speakers, Blu-ray player, laptop, game console) to the corresponding TV ports.
Cable Management
After all connections are completed, lead all connecting cables downwards through the duct at the bottom of the media bay.
Leave a drip loop when cables enter the compartment. This will prevent water from dripping down the cord and possibly entering the media bay area.
Close the media bay and tighten the thumb screws to avoid moisture from entering the media bay and coming into contact with the connection points.
Installation
The TV should be installed in an area where no direct sunlight hits the LCD screen. Ideally, in a shaded area, under a patio, or near a structure that protects it from direct sunlight.
Before mounting, consider the times you will most often watch the TV and observe the sun's movement throughout the day to find an optimal location without direct sunlight. Remember that the sun's position varies with the seasons.
If mounting in an area with potential direct sunlight, consider adding a sunshade, awning, or gazebo to protect the TV from prolonged exposure.
Sunlight Exposure Warning: In extreme heat and direct sunlight, the LCD screen may overheat and cause black spots. This is normal and the spots will disappear once the TV cools down. Move the screen away from direct sun or add shade to prevent recurrence.
Power Off Protection: While powered off, ensure the TV is not exposed to direct sun for extended periods, as this can reduce the panel's lifespan. Use a TV cover for protection.
Operating Temperature: The TV is designed for residential use and tested to operate between -24°F (-31°C) and 122°F (50°C) ambient temperature, provided there is no direct sunlight on the screen for prolonged periods.
ℹ️ NOTE: Connect all cables before mounting the TV on the wall or mount. The rear media bay will be obstructed once mounted.
Follow the installation guide supplied with the Wall-Mount Bracket.
Choose an appropriate location and refer to the VESA pattern for mounting.
It is recommended to contact a professional for installation and use at least two people to move or install the TV.
VESA Mounting Pattern:
| Model | Width | Height | Screw Size | Screw Quantity |
|---|---|---|---|---|
| 50" (1270 mm) TV | 7 7/8" (200 mm) | 15 3/4" (400 mm) | M6 * 3/5" (15mm) | 4 |
The VESA mounting diagram shows how to attach a mounting bracket to the TV using M6 screws and an adapter, indicating the mounting surface.
Connect Power
⚠️ CAUTION: Do not connect power cord during cable connecting and TV installation.
Ensure the TV and GFCI receptacle are installed a safe distance from any water source. Check local electrical codes and comply with their standards.
The diagram shows the TV connected to a GFCI protected outlet.
Install Remote Control Battery
ℹ️ NOTE: Protect the remote with the provided silicone sleeve from damage or malfunction due to accidental spillage of liquids. Do not immerse the remote control in water, or expose it to rain.
The process shows inserting batteries into the remote, with a silicone sleeve.
Getting Started with webOS TV
Initial Setup:
Press the ⏻ button on the control panel or remote control to turn on the TV. Follow the on-screen instructions to finish the initial setup.
Quick Operating:
The home screen will be displayed automatically when the TV is turned on. If not, press the ? button on the remote control.
ℹ️ NOTE: Software may be updated irregularly; please refer to the product's software version.
About User Guide on the TV
For more information on each feature of the webOS TV, consult the User Guide available on the TV.
Press the ? button on your remote control to select the User Guide.
ℹ️ NOTE: Images and information in the User Guide may differ depending on the model and operating environment. Product specifications may change without prior notice due to product function upgrades.
Home Tutorial
Using the Home Feature of the webOS TV:
You can open the Home screen by pressing the ? button on your remote control. You can open apps and content or use various features of the smart TV.
The screen displays numbered options:
- Log in to your LG Account or view basic account information.
- Launch Search. (For details, navigate to Apps and Content → Content Search in the User Guide.)
- Return to the most recently used TV or external input.
- Run, move, and delete installed apps.
Quick Settings
To Use Setting Function Quickly:
Displays a set of light-weight controls for Picture Mode, Sound Out, Game Optimizer, and more.
Press the ⚙️ button on the remote control.
The numbered options are:
- Set the Picture Mode.
- Set the Sound Mode.
- Choose the Sound Out.
- Directs to Game Optimizer settings.
- Directs to OLED Care settings.
- Directs to Network settings.
- Set more options.
- Add/delete quick setting items or change their order.
ℹ️ NOTE: You can also long-press the ⚙️ button to access all settings directly.
ℹ️ NOTE: Configurable items differ by model.
Company Information
Furrion Ltd. and Furrion, LLC (Furrion) are wholly owned subsidiaries of Lippert Components, Inc. (Lippert).
Furrion, LLC: 52567 Independence Ct., Elkhart, IN, 46514
Furrion Innovation Center & Institute of Technology: 22244 Innovation Drive, Elkhart, IN 46514-5514, USA
Toll-free: 1-800-789-3341
Email: customerservice@lci1.com
For Patent Info: www.Lippert.com/patents
Support: SUPPORT.LCI1.COM/FURRION
The contents of this manual are proprietary and copyright protected by Lippert. Unauthorized use voids warranty. Information is subject to change without notice. Revised editions are available at lippert.com.
