CLAYPAKY CL3012 Arolla Spot MP Instruction Manual

Instruction Manual for CLAYPAKY models including: CL3012, CL3012 Arolla Spot MP, CL3012, Arolla Spot MP, Spot MP, MP

Clay Paky Arolla Spot MP

Типа SPOT Clay Paky Arolla Spot MP купить в Москве с доставкой

File Info : application/pdf, 20 Pages, 8.91MB

Clay Paky Arolla Spot MP

ENGLISH

AROLLA SPOT MP

CL3012

PRELIMINARY

INSTRUCTION MANUAL
https://muzcentre.ru/

Page
2
3
4 4 5 5 6
8 8 9 10 14 16
17
17

INDEX
Contents
1. Safety information
2. Unpacking and preparation
3. Installation and start-up 3.1 Installing the fixture 3.2 Connecting to manis supply 3.3 Connecting the control signal line: DMX / Art-Net 3.4 Switching on the fixture and basic SetUp
4. Maintenance 4.1 Opening the covers 4.2 Periodical cleaning 4.3 Effects module removal 4.4 Rotating gobos 4.5 Battery removal
5. Dimensions
6. Cause and solution of problems

Congratulations on choosing a Claypaky product! We thank you for your custom. Please note that this product, as all the others in the rich Claypaky range, has been designed and made with total quality to ensure excellent performance and best meet your expectations and requirements.

1. SAFETY INFORMATION

SAFETY INFORMATION IMPORTANT: Claypaky recommends you carefully read and keep the safety information on this product, also

available in digital format at the following link: www.claypaky.com

Ref: FIS025 - Safety Information Arolla Spot/Profile MP

INFORMAZIONI DI SICUREZZA IMPORTANTE: Claypaky raccomanda di leggere accuratamente e conservare le informazioni di sicurezza relative

a questo prodotto, sempre reperibili in versione digitale al seguente link: www.claypaky.com

Rif: FIS025 - Safety Information Arolla Spot/Profile MP

INFORMATIONEN ZUR SICHERHEIT WICHTIG: Claypaky empfiehlt, die Sicherheitsinformationen bezüglich dieses Produkts genau zu lesen und

aufzubewahren. Sie sind in Digitalversion immer unter folgendem Link auffindbar: www.claypaky.com

Ref: FIS025 - Safety Information Arolla Spot/Profile MP

INFORMACIONES DE SEGURIDAD IMPORTANTE: Claypaky recomienda leer detenidamente y conservar la información de seguridad relativa a este

producto. Además, está disponible una versión digital de la misma en el siguiente enlace: www.claypaky.com

Ref: FIS025 - Safety Information Arolla Spot/Profile MP

CONSIGNES DE SÉCURITÉ IMPORTANT: Claypaky recommande de lire attentivement et de conserver les informations de sécurité relatives à

ce produit, disponibles en version digitale au lien suivant: www.claypaky.com

Réf. : FIS025 - Safety Information Arolla Spot/Profile MP

: Claypaky

, : www.claypaky.com

: FIS025 - Safety Information Arolla Spot/Profile MP

AROLLA SPOT MP

2. UNPACKING AND PREPARATION 1
2 x 183102/805

45°

Packing contents - Fig. 1
2
UNLOCKED LOCKED
90°

3
LOCKED UNLOCKED

45°

90°

PAN Mechanism Lock and Release (every 90°) - Fig. 2 TILT Mechanism Lock and Release (every 45°) - Fig. 3

AROLLA SPOT MP

3. INSTALLATION AND START-UP 3.1 Installing the fixture
4

Installing the projector - Fig. 4 The projector can be installed on the floor resting on special rubber feet, on a truss or on the ceiling or wall. WARNING: with the exception of when the projector is positioned on the floor, the safety cable must be fitted. (Cod. 105041/003 available on request). This must be securely fixed to the support structure of the projector and then connected to the fixing point at the centre of the base.
5

Display
Control panel - Fig. 5

User buttons

AROLLA SPOT MP

DMX IN DMX THRU Ethernet

(5 pin)

Fuse Power IN

3.2 Connecting to manis supply 6

2 7F245u00sVeVAT10A 1

Connecting and disconnecting power cable - Fig. 6

Mains

1
2 3

Connecting to the mains supply - Fig. 7
3.3 Connecting the control signal line: DMX / Art-Net 8

DMX 512 5 PIN
51 42
3

SCREEN SIGNAL SIGNAL

Connecting to the control signal line (DMX) - Fig. 8 Use a cable conforming to specifications EIA RS-485: 2-pole twisted, shielded, 120Ohm characteristic impedance, 22-24 AWG, low capacity. Do not use microphone cable or other cable with characteristics differing from those specified. The end connections must be made using XLR type 5 pin male/female connectors. A terminating plug must be inserted into the last projector with a resistance of 120Ohm (minimum 1/4 W) between terminals 2 and 3. IMPORTANT: The wires must not make contact with each other or with the metal casing of the connectors. The casing itself must be connected to the shield braid and to pin 1 of the connectors.

AROLLA SPOT MP

Continue

3.4 Switching on the fixture and basic SetUp 9

Dmx Address

Warning Message

Switching on the projector - Fig. 9 Switch-on the fixture. The projector starts resetting the effects. At the same time, the following information scrolls on the display:

Model Arolla Spot MP

Firmware Version X.X.X Date - Hour

Dmx Address xxx

On conclusion of resetting in case of absence of the dmx signal, Pan and Tilt move to the "Home" position (Pan 128 bit - Tilt 128 bit). The control panel (Fig. 8) has a display and buttons for the complete programming and management of the projector menu. The display can be in one of two conditions: rest status and setting status. When it is in the rest status, the display shows the projector's DMX address. During menu setting status, after a wait time (about 30 seconds) without any key having been pressed, the display automatically returns to rest status.
F It should be noted than when this condition occurs, any possible value that has been modified but not yet confirmed with the key will be cancelled.

Reversal of the display - Fig. 10
B C To activate this function, press UP and DOWN keys simultaneously while the display is in the rest mode. This status will be memorised and
maintained even for the next time it will be switched on. To return to the initial state, repeat the operation all over again. Setting the projector starting address
On each projector, the starting address must be set for the control signal (addresses from 1 to 512). The address can also be set with the projector switched off.

AROLLA SPOT MP

Functions of the buttons - Using the menu
F Confirms the displayed value, or activates the displayed function, or enters the successive menu.
C Decreases the value displayed (with auto-repetitions) or passes to the next item in the menu.
DOWN
B Increases the value displayed (with auto-repetitions) or passes to the previous item in a menu. UP
D Return to the top level LEFT
E Enters the successive menu.
RIGHT
USING THE MENU:
D 1) Press LEFT once "Main Menu" appears on the display. B C 2) Use the UP and DOWN keys to select the menu to be used:
· Setup (Setup Menu): To set the setting options. · Option (Option Menu): To set the operating options · Informations (Informations Menu): To read the counters, software version and other information. · Manual Control (Manual control Menu): To trigger the test and manual control functions. · Test (Test Menu): To check the proper functionning of effects · Advanced (Advanced Menu): Access to the "Advanced menu" is recommended for a trained technical personnel.
F 3) Press to display the first item in the selected menu. B C 4) Use the UP and DOWN keys to select the MENU items.
Setting addresses and options with the projector disconnected The projector's DMX address, as well as other possible operating options, can also be set when the appliance is disconnected from the electricity supply.
E All that is needed is to press RIGHT to momentarily activate the display and thus access the settings. Once the required operations have been
carried out, the display will switch off again after a wait time of 30 seconds.

AROLLA SPOT MP

11
1

1/4 Turn

4. MAINTENANCE 4.1 Opening the covers
12
2 1

1/4 Turn 2
3

Locking and releasing Pan and Tilt movements - Refer to the instructions in the UNPACKING AND PREPARATION section. Opening the head covers - Fig. 11.
Closing the head covers - Fig. 12.

AROLLA SPOT MP

13
NOTE: keep a careful cleaning of the ''CMY/colour filters assembly'' to prevent rapid deterioration.
Light collimation system This product contains internal light collimation system. Avoid intense light from any angle.

4.2 Periodical cleaning

Upper side

Lower side

Periodical cleaning - Fig. 13
To ensure optimal operation and performance for a long time it is essential to periodically clean the parts subject to dust and grease deposits. The
frequency with which the following operations are to be carried out depends on various factors, such as the amount of the effects and the quality of the
working environment (air humidity, presence of dust, salinity, etc.).
Use a soft cloth dampened with any detergent liquid for cleaning glass to remove the dirt from the reflectors, from the lenses and filters. It is recommended
that the projector undergoes an annual service by a qualified technician for special maintenance involving at least the following operations: · General cleaning of internal parts. · Restoring lubrication of all parts subject to friction, using lubricants specifically supplied by Claypaky. · General visual check of the internal components, cabling, mechanical parts, etc. · Electrical, photometric and functional checks; eventual repairs.

AROLLA SPOT MP

Continue

4.3 Effects module removal 14
Upper side
1
2

Extraction of the effect modules - Fig. 14. IMPORTANT: Grasp the modules using the support structure and not the details which could get damaged. Insertion of the effect modules: Repeat the operations indicated in Fig. 14, 15 and 16 in reverse order.

AROLLA SPOT MP

15
Upper side

Lower side
3

1
4 5

Extraction of the effect modules - Fig. 15. IMPORTANT: Grasp the modules using the support structure and not the details which could get damaged. Insertion of the effect modules: Repeat the operations indicated in Fig. 14, 15 and 16 in reverse order.

AROLLA SPOT MP

Continue

16
Upper side

1 2

Extraction of the effect modules - Fig. 16. IMPORTANT: Grasp the modules using the support structure and not the details which could get damaged. Insertion of the effect modules: Repeat the operations indicated in Fig. 14, 15 and 16 in reverse order.

AROLLA SPOT MP

17 3

Cleaning of the grids - Fig. 17.

AROLLA SPOT MP

3 4
Continue

4.4 - Rotating gobos 18
2
1

Bearing group replacement - Fig. 18

19
INDEX Gobo 3
Gobo 2
Gobo 1

Gobo 4

Gobo 5 Gobo 6
Gobo 7

ø22.9 ±0.2 ø17

Replacing rotating gobos (ø 22.9 mm max 17 mm image thickness 1.1 mm) - Fig. 19 - The rotating gobo wheel only use dichroic glass gobos (it is not possible to use metal gobos); - For more information contact Claypaky;

3 1.1

AROLLA SPOT MP

20
2
1

Bearing group replacement - Fig. 20

Gobo 4

INDEX

Gobo 3

Gobo 2

Gobo 1

Gobo 5 Gobo 6
Gobo 7

ø22.9 ±0.2 ø17

3 1.1

Replacing rotating gobos (ø 22.9 mm max 17 mm image thickness 1.1 mm) - Fig. 21 - The rotating gobo wheel only use dichroic glass gobos (it is not possible to use metal gobos); - For more information contact Claypaky;

22 COATED GLASS GOBOS TYPE 1
GOBO DI VETRO DICROICI TIPO 1

COATED GLASS GOBOS TYPE 2
GOBO DI VETRO DICROICI TIPO 2

Grey/Black side away from light source

Coated side towards light source

Coated side

Reflective side towards light source
Gobo orientation - Fig. 22 The pictures shown the correct gobos orientation.
AROLLA SPOT MP

Uncoated side Uncoated side To determine which side of a godo is coated, hold an odject up to it. On the uncoated side, there is a space between the object and its reflection.
Continue 15

4.5 - Battery removal 23

This product contains a rechargeable battery. To preserve the environment, please dispose the battery at the end of its life according to the regulation in force.

AROLLA SPOT MP

480 (18.89")
412 (16.22")

5. DIMENSIONS
593 (23.35")

480 (18.90")

250 (9.84")

347 (13.66")
360 (14.17")

6. CAUSE AND SOLUTION OF PROBLEMS

THE PROJECTOR WILL NOT SWITCH ON ELECTRONICS NON-OPERATIONAL DEFECTIVE PROJECTION REDUCED LUMINOSITY
POSSIBLE CAUSES
No mains supply. Light source exhausted or defective. Signal transmission cable faulty or disconnected. Incorrect addressing. Fault in the electronic circuits. Lenses broken Dust or grease deposited.

PROBLEMS
CHECKS AND REMEDIES
Check the power supply voltage. Call an authorised technician. Replace the cables. Check addresses (see instructions). Call an authorised technician. Call an authorised technician. Clean (see instructions).

AROLLA SPOT MP

IST02D/001 EN - PRELIMINARY 04/2021

CLAYPAKY S.p.A. - Via Pastrengo, 3/b - 24068 Seriate (BG) Italy - Tel. +39-035 -654311 - www.claypaky.com

References

4-Heights™ PDF Library 3.4.0.6904 (http://www -tools.com) QuarkXPress(R) 12.23