POCO C75 Safety Information and Regulatory Compliance

Introduction

This document provides essential safety information, regulatory compliance details, and usage guidelines for the POCO C75 mobile phone.

Safety Precautions

• Observe all applicable laws and rules restricting mobile phone use in specific situations and environments.
• Do not use the phone at petrol stations or in potentially explosive environments. Obey all posted signs to turn off wireless devices. Turn off the phone in blasting areas or areas requiring "two-way radios" or "electronic devices" to be turned off.
• Do not use the phone in hospital operating rooms, emergency rooms, or intensive care units. Always comply with hospital and health center rules. Consult a doctor and manufacturer if your phone may interfere with a medical device. Maintain a minimum distance of 15 cm between the phone and pacemakers. Avoid interference with medical equipment by not using the phone near hearing aids, cochlear implants, or similar devices.
• Observe aircraft safety regulations and turn off the phone on board aircraft when required.
• When driving, use the phone in accordance with traffic laws and regulations.
• To avoid lightning strikes, do not use the phone outdoors during thunderstorms.
• Do not use the phone to make calls while charging.
• Do not use the phone in places with high humidity, such as bathrooms, as this may result in electric shock, injury, fire, and charger damage.

Charging and Compatibility

To charge:

• Connect the POCO C75 to a computer using a USB data cable.
• Use the included USB cable with a Mi brand charger and connect to a power strip. The product allows chargers with a maximum output of 18W. Maximum voltage should not exceed [9 V] and maximum current should not exceed [2A].

Charging Compatibility:

Third-party chargers complying with USB2.0 or higher protocol standards and meeting International Information Technology Equipment Safety Standard (IEC 60950), Audio/video, Information and Communication Technology Equipment Standard (IEC 62368-1), and relevant laws/regulations are also compatible. Using other chargers may damage the product and personal safety.

Power Delivery: The charger should deliver between [10] Watts (minimum) and [18] Watts (maximum) for optimal charging speed (USB PD fast charging).

Regulatory Information

EU Regulations

RED Declaration of Conformity: Xiaomi Communications Co., Ltd. declares that this GSM/GPRS/EDGE/UMTS/LTE Digital Mobile Phone with Bluetooth and Wi-Fi 2410FPCC5G complies with essential requirements and relevant provisions of the RE Directive 2014/53/EU. The full text is available at www.mi.com/en/certification.

RF Exposure Information (SAR): This device complies with Specific Absorption Rate (SAR) limits for general population/uncontrolled exposure (10-gram SAR for head and trunk: 2.0W/kg) as specified by Council Recommendation 1999/519/EC, ICNIRP Guidelines, and RED (Directive 2014/53/EU). During SAR testing, the device transmitted at its highest certified power level in all tested frequency bands and was placed in positions simulating RF exposure near the head (no separation) and near the body (5 mm separation). Body SAR compliance is based on a 5 mm separation distance. The device should be carried at least 5 mm away from the body. Use belt clips or holsters without metal components for body-worn operation, ensuring at least 5 mm separation. RF exposure compliance with metal-containing body-worn accessories was not tested or certified and should be avoided.

Certification Information (Highest SAR): SAR 10 g limit: 2.0 W/Kg. SAR Value: Head: 0.976 W/Kg, Body: 0.985 W/Kg (5 mm distance).

Legal Information: This device may be operated in all EU member states. Observe national and local regulations. Restricted to indoor use only when operating in the 5250 to 5350 MHz frequency range in: AT,BE,BG,HR,CY,CZ,DK,EE,FI,FR,DE,EL,HU,IE,IT,LV,LT,LU,MT,NL,PL,PT,RO,SK,SI,ES,SE,UK(NI),IS,LI,NO,CH,TR.

Wi-Fi Connectivity: May vary based on regional availability and local network support. Functionality may be added via OTA.

2.4 GHz Band Restrictions: Norway: Not applicable within a 20 km radius of Ny-Ålesund.

Ensure power adapters comply with applicable country regulations and international/regional safety standards.

Frequency Bands and Power:

• GSM 900: 35.5 dBm
• GSM 1800: 32.5 dBm
• WCDMA band 1/8: 25.7 dBm
• LTE band 1/3/7/8/20/28/38/40/41: 25.7 dBm
• Bluetooth: 20 dBm
• Wi-Fi 2.4 GHz band: 20 dBm
• Wi-Fi 5 GHz: 5150-5250MHz: 23 dBm, 5250-5350 MHz: 23 dBm, 5470-5725 MHz: 23 dBm, 5725-5850 MHz: 14 dBm
• NFC: 13.56 MHz < 42 dBuA/m at 10m

FCC Regulations

This mobile phone complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) no harmful interference, and (2) acceptance of any received interference. Tested and found to comply with Class B digital device limits per Part 15 of FCC Rules, designed for reasonable protection against harmful interference in residential installations. Equipment generates, uses, and can radiate RF energy; improper installation/use may cause harmful interference to radio communications. Interference is not guaranteed not to occur. If interference occurs, users are encouraged to correct it by reorienting/relocating the antenna, increasing separation between equipment and receiver, connecting to a different circuit, or consulting a dealer/technician.

RF Exposure Information (SAR): Device meets government requirements for radio wave exposure. Designed and manufactured not to exceed RF energy emission limits. Wireless device exposure standard uses Specific Absorption Rate (SAR). FCC SAR limit is 1.6 W/Kg. For body-worn operation, tested and meets FCC RF exposure guidelines for use with non-metal accessories, maintaining at least 1.0 cm distance from the body. Compliance with RF exposure for metal-containing body-worn accessories was not tested or certified and should be avoided. Any body-worn accessory must maintain at least 1.0 cm distance from the body.

FCC Note: Changes or modifications not expressly approved by the responsible party could void the user's authority to operate the equipment. Shielded cables must be used to ensure compliance with Class B FCC limits.

UK Regulations

Declaration of Conformity: Xiaomi Communications Co., Ltd. declares compliance with UK Radio Equipment Regulations 2017 (S.I. 2017/1206). Full text available at www.mi.com/en/certification.

RF Exposure Information (SAR): Complies with SAR limits for general population/uncontrolled exposure (10-gram SAR for head and trunk: 2.0W/kg) as specified in Council Recommendation 1999/519/EC, ICNIRP Guidelines, and UK Radio Equipment Regulations 2017 (S.I. 2017/1206). During SAR testing, device transmitted at highest certified power level in all tested frequency bands, simulating RF exposure near head (no separation) and near body (5 mm separation). Body SAR compliance based on 5 mm separation. Device should be carried at least 5 mm away from body. Use belt clips or holsters without metal components for body-worn use, ensuring at least 5 mm separation. RF exposure compliance with metal-containing body-worn accessories was not tested or certified and should be avoided.

Certification Information (Highest SAR): SAR 10 g limit: 2.0 W/Kg. SAR Value: Head: 0.976 W/Kg, Body: 0.985 W/Kg (5 mm distance).

Legal Information: Observe national and local regulations. Restricted to indoor use only when operating in the 5250 to 5350 MHz frequency range in: AT,BE,BG,HR,CY,CZ,DK,EE,FI,FR,DE,EL,HU,IE,IT,LV,LT,LU,MT,NL,PL,PT,RO,SK,SI,ES,SE,UK(NI),IS,LI,NO,CH,TR.

Wi-Fi Connectivity: May vary based on regional availability and local network support. Functionality may be added via OTA.

2.4 GHz Band Restrictions: Norway: Not applicable within a 20 km radius of Ny-Ålesund.

Ensure power adapters comply with applicable country regulations and international/regional safety standards.

Frequency Bands and Power:

• GSM 900: 35.5 dBm
• GSM 1800: 32.5 dBm
• WCDMA band 1/8: 25.7 dBm
• LTE band 1/3/7/8/20/28/38/40/41: 25.7 dBm
• Bluetooth: 20 dBm
• Wi-Fi 2.4 GHz band: 20 dBm
• Wi-Fi 5 GHz: 5150-5250MHz: 23 dBm, 5250-5350 MHz: 23 dBm, 5470-5725 MHz: 23 dBm, 5725-5850 MHz: 14 dBm
• NFC: 13.56 MHz < 42 dBuA/m at 10m

E-label and Factory Reset

E-label: Access certification information via Settings > About phone > Certification, or open Settings and type "Certification" in the search bar.

Factory Reset Instructions: Path: Settings > About phone > Factory reset. This function quickly erases local data including accounts, contacts, photos, videos, apps, backups, SD card data, and other items.

Recycling Information

This device, and its cords, are recyclable. Please check www.quefairedemesdechets.fr for collection points. Prioritize repair or donation of your device!

Manufacturer Information

Manufacturer: Xiaomi Communications Co., Ltd.

Manufacturer's Authorized EU Representative: Xiaomi Technology Netherlands B.V. (Address: Prinses Beatrixlaan 582, 2595BM, The Hague, The Netherlands; contact@support.mi.com)

Manufacturer's Authorized UK Representative: Xiaomi Technology UK Limited (Address: Davidson House, Forbury Square, Reading, Berkshire RG1 3EU; contact@support.mi.com)

Manufacturer Postal Address: #019, 9th Floor, Building 6, 33 Xi'erqi Middle Road, Haidian District, Beijing, China, 100085; contact@support.mi.com