Palissade Fixation Bracket

Parts

• A Fixation bracket: x4. (Diagram: A single bracket with a base plate featuring a hole for attachment and a vertical post with a hole at the top.)
• B Allen key: x1. (Diagram: An L-shaped hexagonal wrench.)
• C Thicker O-ring: x4. (Diagram: A thick, circular rubber ring.)
• D Thinner O-ring: x4. (Note: Only for Palissade Park Dining Bench.) (Diagram: A thin, circular rubber ring.)

Instructions

1. Screw a self-tapping screw into the existing glider. (Diagram: An arrow pointing downwards, showing a screw being inserted into a furniture leg's existing glider.)
2. Take hold of the screw and pull the glider out. (Diagram: An arrow pointing upwards, showing the screw and glider being pulled out.)
3. Mount the O-ring. Use D for Palissade Park Dining Bench and C for all other Palissade models. (Diagram: An illustration showing an O-ring being placed onto the top of the furniture leg.)
4. Insert the fixation bracket into the leg. Make sure the screw is untightened. (Diagram: The fixation bracket being pushed onto the leg. Includes visual indicators for correct fit (✔️) and incorrect fit with a gap (❌).)
5. Tighten the screw with the Allen key. Make sure the fixation bracket is fully pushed down, leaving no gap between the leg and the fixation bracket. (Diagram: An Allen key tightening a screw to secure the bracket, shown flush against the furniture leg.)
6. Repeat the process for all four legs and then secure it to the floor/ground with suitable screws. (Diagram: An illustration of a Palissade chair, implying the process is repeated for all legs and the chair is secured to the floor.)

Care & Maintenance

Our Care & Maintenance offers guidance for optimal maintenance of your HAY product. It includes advice and instructions on cleaning and caring for specific materials to prolong the life of your furniture.

You can find more relevant information on the Palissade Collection at hay.dk/downloads.