Instruction Manual for Godox models including: LMD-40C, Dual Omnidirectional Lavalier Microphone

LMD-40C

Godox

LMD-40C - Godox

23 apr 2021 —

Godox LMD-40C 202104..>

Index of /EN/InstructionManual

Apr 23, 2021 — 欢迎使用多功能双咪头全向型领夹式麦克风LMD-40C,本产品由两个全向型麦克. 风组成,线长4米;适用于采访、演示文稿、播客、网络直播等多种场景。可以用.

PDF preview unavailable. Download the PDF instead.

Godox LMD-40C 20210423
LMD-40C
Dual Omnidirectional Lavalier Microphone
 | Instruction Manual


LMD-40C 4 / 

1.  2.  LR44  3.  4.  5.  6. 

      40  



1. 

 

  /  ( 

 )

 3.5mm TRRS  (  TRRS  TRS

1

 TRRS 

2

 TRS  )

 

3

4

2. 

 × 2

 × 2

 × 2

6.5mm3.5mm  × 1

LR44 × 1

 × 1

 × 1


1.  2.  20  3. 


1.  LMD-40C "OFF/SmartPhone" (  ,  )
2.  3.5mm TRRS  3.5mm  
3. 



1.  2. 


1.  2.  LMD-40C "Camera" (  , 
 ) 3.  3.5mm TRRS 
 



          / 

LMD-40C  () 3.5mm TRRS / 120dB (THD5% @1KHz) 20Hz-20KHz -32±2dB (0dB=1V/Pa @1KHz) 74dB -10-50 LR44 4/49g () 

+


10 0
-10


[dB/1 V/Pa]
[1KHz] -30 -40 -50


        1   


 

 

  

 



  









(  )   (  ) 


 


    ,  


                    

 

 

    

() 

12



3



12





   



 0755-29609320-8062

Forward
Thank you for purchasing Godox Dual Omnidirectional Lavalier Microphone LMD-40C.This product is consist of two omnidirectional microphones with 4-meter cable. This omnidirectional microphone is perfect for interview, video recording, livestream, program presentation, etc. It can be applied on smartphone, camera, camcorder, sound recorder, computer or more video & audio recording equipment. Please read this manual carefully before using to make sure the correct operation and exert the optimum function.
Product Features
1. Compact and lightweight with great portability. 2. Powered by a LR44 button cell. 3. Microphone body is made of aluminum, which is durable and delicate. 4. With specially made acoustic windscreen to reduce noise and make sound
more soft and graceful. 5. The two MIC design supports two microphones to be used simultaneously. 6. One-piece design which can be used directly.
Warning
Do not disassemble. Should repairs become necessary, this product must be sent to an authorized maintenance center. Always keep this product dry. Do not use in rain or in damp conditions. Keep out of reach of children. Do not use the flash unit in the presence of flammable gas. In certain circumstance, please pay attention to the relevant warnings. Do not leave or store the product if the ambient temperature reads over 40. Please carefully read and observe the warnings and instructions provided by the manufacturer.

Product Description

 Dual Omnidirectional Microphone

 Camera Recording Mode /Smartphone Recording

Mode (switch to off)

 3.5mm TRRS Connector (supports TRRS and

TRS port. Smartphone or parts of computer use

TRRS port while camera or other audio

equipment use TRS port)  Clip

1 2

3

4

What's Inside

Windscreen Collar Clip × 2 Foam × 2

Velcro Tape × 2

6.5mm to 3.5mm Audio Connector × 1

LR44 Button Battery × 1 Portable Bag × 1

Instruction Manual × 1

Operation
1. This product can be used directly, which is compatible with various of equipment.
2. Please fix the microphone onto your clothes which is 20 centimeters far away from your face.
3. It is recommended to use windscreen all the time to avoid wind noise.

Being used on smartphone 1. Turn the power switch of LMD-40C to OFF/Smarphone(please set the
microphone to this step, otherwise, recording cannot be carried out). 2. Insert 3.5mm TRRS connector into the audio port of smartphone (use a
convert cable if the smartphone do not have 3.5mm port). 3. Open the audio or video recording applications to start recording.
Note: When being used on smartphone, there is no need to install the battery.
Being used on camera 1. Battery should be installed. 2. Turn the power switch of LMD-40C to Camera (please set the microphone to
this step, otherwise, recording cannot be carried out). 3. Insert 3.5mm TRRS connector into the microphone input port of DSLR
camera and camcorder. Then, start shooting. Note: please make sure the used equipment has microphone or not. Please verify this with the equipment' s manufacturer.

Battery Replacement
1. Open the battery compartment. 2. Take out the old battery and replace it with a new one. Please not the directions of battery anode and cathode.

+

Technical Data

Model

LMD-40C

Type Plug

Capacitive (electret) 3.5mm TRRS Connector

Pick-up sound mode Peak Sound Pressure Level Frequency Range Sensitivity Signal Noise Ratio Working temperature Battery Length/Weight Material

Omnidirectional/dual-head 120dB (THD5% @1KHz) 20Hz-20KHz -32±2dB (0dB=1V/Pa @1KHz) 74dB -10¥-50¥ LR44 Button Battery 4m / 49g (battery is included) Aluminum in grey

Frequency Response Graph
[dB/1 V/Pa] 10
0 -10

Directivity Graph

[1KHz]
-30 -40 -50

Maintenance
Avoid sudden drops. The device may fail to work after strong shocks, impacts, or excess stress.
Keep dry. The product isn' t water-proof. Malfunction, rust, and corrosion may occur and go beyond repair if soaked in water or exposed to high humidity.
Keep away from strong magnetic field. The strong static or magnetic field produced by devices such as radio transmitters leads to malfunction.
This product belongs to consumables and do not support one-year warranty. If the product had failures or was wetted, do not use it until it is repaired by professionals.
Changes made to the specifications or designs may not be reflected in this manual.

Warranty
Dear customers, as this warranty card is an important certificate to apply for our maintenance service, please fill in the following form in coordination with the seller and safe-keep it. Thank you!

Product Information Customer Information

Model Name Address

Product Code Number Contact Number

Seller Information

Name Contact Number Address

Note

Date of Sale

Note: This form shall be sealed by the seller.
Applicable Products
The document applies to the products listed on the Product Maintenance lnformation (see below for further information). Other products or accessories (e.g. promotional items,giveaways and additional accessories attached,etc.) are not included in this warranty scope.
Warranty Period
The warranty period of products and accessories isimplemented according to the relevant Product Maintenancelnformation. The warranty period is calculated from the day(purchase date) when the product is bought for the first time,And the purchase date is considered as the date registered onthe warranty card when buying the product.
How to Get the Maintenance Service
If maintenance service is needed, you can directly contact the product distributor or authorized service institutions. You can also contact the Godox after-sale service call and we will offer you service. When applying for maintenance service, you should provide valid warranty card. If you cannot provide valid warranty card, we may offer you maintenance service once confirmed that the

product or accessory is involved in the maintenance scope, but that shall not be considered as our obligation.

Inapplicable Cases

The guarantee and service offered by this document are not applicable in the following cases: æ. The product or accessory has expired its warranty period; ç. Breakage or damage caused by inappropriate usage, maintenance or preservation, such as improper packing, improper usage,
improper plugging in/out external equipment, falling off or squeezing by
external force, contacting or exposing to the improper temperature, solvent, acid, base, flooding and damp environments, etc; è. Breakage or damage caused by non-authorized institution or staff in the process of installation, maintenance, alternation, addition and detachment; é. The original identifying information of product or accessory is modified, alternated, or removed; ê. No valid warranty card; ë. Breakage or damage caused by using illegally authorized, nonstandard or non-public released software; ì. Breakage or damage caused by force majeure or accident; í. Breakage or damage that could not be attributed to the product itself. Once
met these situations above, you should seek solutions from the related responsi-
ble parties and Godox assumes no responsibility. The damage caused by parts,
accessories and software that beyond the warranty period or scope is not
included in our maintenance scope. The normal discoloration, abrasion and
consumption are not the breakage within the maintenance scope.

Maintenance and Service Support Information
The warranty period and service types of products are implemented according to the following Product Maintenance Information:

Product Name Type

Maintenance Warranty Service Type Period(month)

Parts

Product Main Body

12

Customer sends the product

to designated site

Battery

3

Customer sends the product

to designated site

Charger, Power Cable,Sync

12

Cable, Electrical Parts etc.

Customer sends the product to designated site

Other Battery Case, Windproof

No

Items Sponge, Wind Cap, Locking

Device, Lanyard, Tie, Velcro

Tape, Clip, Bag, Package etc.

Without warranty

Godox After-sale Service Call 0755-29609320-8062


Follow Wechat Public Account

QC PASS


: 2 : +86-755-29609320(8062) : +86-755-25723423

: godox@godox.com

GODOX Photo Equipment Co., Ltd.

Add: Building 2, Yaochuan Industrial Zone,Tangwei Community, Fuhai Street, Bao'an District, Shenzhen 518103, China Tel: +86-755-29609320(8062) Fax: +86-755-25723423 E-mail: godox@godox.com

godox.com

Made In China


Adobe PDF library 15.00