Instruction Manual for CMM OFFROAD models including: JLU Universal A Pillar Ball Mount, JLU, Universal A Pillar Ball Mount, Pillar Ball Mount, Ball Mount
Universal A-pillar Ball Mount – CMM Offroad
CMM Universal A-Pillar Ball Mount Installation Instructions Thank you for purchasing the CMM Universal A-Pillar Ball Mount! You will need: 9mm or 10mm (varies upon vehicle) socket with an extension of at least 2 inches & a 8mm Allen wrench USE CAUTION WORKING NEAR THE WINDSHIELD!! STEP 1 Remove Upper or lower cover plate from the A-Pillar Handle with a flat blade screwdriver or a trim removal tool STEP 2 Use a 9mm or 10mm (this may vary per vehicle) socket to remove the factory bolt. STEP 3 Reinstall our Univerasal A-Pillar Ball Mount and tighten by hand until snug. Then use your 8mm Allen Wrench to add a 1/2 to 3/4 turn more to secure. If you have a sPod and/or a hands free mic, use caution to not crush the wires between the stanchion and the A-pillar frame. ENJOY YOUR NEW Universal A-Pillar Ball Mount! If you have any technical questions, please feel free to call: (704) 213-4319Microsoft Word 2013