STYL SR128 Contactless PCD Module User Manual

User Manual for STYL models including: SR128, 2AKLKSR128, SR128 PCD Module, Contactless PCD Module, SR128 Contactless PCD Module, PCD Module

Windows User

User Manual

LAND TRANSPORT AUTHORITY SR128 SIRIUS Contactless Transit Reader is versatile Transit Reader SR128 for Contactless Payment. 2AKLKSR128 2AKLKSR128 sr128

download (pdf)

SR128 Sirius Contactless Transit Reader Is Versatile Transit Reader Sr128 For Contactless Payment. by LAND TRANSPORT AUTHORITY

File Info : application/pdf, 20 Pages, 1.33MB

SR128-Users-Manual-LAND-TRANSPORT-AUTHORITY-2aklksr128-ex-1-2

SR128 User Manual

Date 11 Sep 2022

Document History

Version Author A Huy Le

Initial release

Change

Rev. A

Page 2

SR128 User Manual

Rev. A

General Note
This document is intended for information purposes.
STYL makes every effort to ensure that the quality of the information is available. The content of this documentation is provided on an "as is" basis and may contain deficiencies or inadequacies. STYL disclaims any warranty and all responsibility for the application of the device(s) that is made in relation to the accuracy, reliability or contents of this document. STYL is not liable for any injury, loss or damage of any kind incurred for the use of or reliance upon information.
STYL reserves the right to make any modifications, additions and deletions to this document due to typographical errors, inaccurate information, or improvements to products at any time and without notice.

Page 3

SR128 User Manual

Rev. A

Contents

1. 1.1. 2. 2.1. 2.2. 2.2.1. 2.2.2. 2.2.3. 2.3. 2.3.1. 2.3.2. 3. 3.1. 3.2. 3.3. 3.4. 3.5. 3.6. 3.7. 4. 5. 6. 6.1. 6.2. 6.3. 6.4. 6.5. 7.

Introduction ..................................................................................................................................... 5 Abbreviations ................................................................................................................................... 5 Contactless Product Construction ................................................................................................... 6 Overview .......................................................................................................................................... 6 PCD Module ..................................................................................................................................... 7
PCD-APP board interfaces............................................................................................................. 7 PCD-SAM board interfaces............................................................................................................ 8 PCD-Antenna board interfaces ................................................................................................... 10 Assembly ........................................................................................................................................ 11 Contactless Product Assembly .................................................................................................... 11 Physical dimension...................................................................................................................... 12 Specifications ................................................................................................................................. 13 Operating Conditions ..................................................................................................................... 13 Power Supply ................................................................................................................................. 13 Processors and Controller.............................................................................................................. 13 Indicator ......................................................................................................................................... 13 PCD................................................................................................................................................. 13 Data Communication Interface...................................................................................................... 14 Standards & Certification............................................................................................................... 14 Reader Connection ........................................................................................................................ 15 Installing and Replacing SAM card................................................................................................. 16 Operational Precautions ................................................................................................................ 17 General Safety Instructions............................................................................................................ 17 Installation ..................................................................................................................................... 17 Reader Status Indicators ................................................................................................................ 18 Battery Safety Information ............................................................................................................ 19 Fuse Information............................................................................................................................ 19 FCC Compliance Statement............................................................................................................ 19

Page 4

SR128 User Manual

Rev. A

1. Introduction

The Contactless Product consists of PCD module, also known as SIRIUS contactless reader SR128, integrated with a 7" LCD display. The PCD module uses the latest NXP front end NFC IC PN5190 for improved RF performance to meet latest EMVCo L1 and L2 VISA/MasterCard specifications. Its antenna is integrated around the PID making the display as the touch point for validating the Fare Media.

This document aims to describe how to operate the Contactless Product and the connectivity of the reader to the host.

1.1. Abbreviations

Abbreviation

ECU

Electronic Control Unit

LCD

Liquid Crystal Display

LED

Light Emitting Diode

PCD

Proximity Coupling Device

PID

Passenger Information Display

PWM

Pulse-width modulation

Radio Frequency

Description

Page 5

SR128 User Manual

Rev. A

2. Contactless Product Construction
This section describes the construction of the Contactless Product.
2.1. Overview
The Contactless Product comprises of the following main components: a) LCD module b) PCD module Application Processor board, SAM board and Antenna/Reader board

Figure 1. System overview
© Copyright 2022 STYL Solution Pte., Ltd., All rights reserved

Page 6

SR128 User Manual
2.2. PCD Module
2.2.1. PCD-APP board interfaces

Rev. A

Connector USB-C1 Connector
B2B connector

Figure 2. PCD-APP board PCB with main connector pinout
Table 1. PCD-APP board PCB main connectors Function USB interface to HOST Support USB 2.0 data only APP board to SAM board connection

Page 7

SR128 User Manual
2.2.2. PCD-SAM board interfaces

Rev. A

Figure 3. PCD-SAM board PCB main connector

Page 8

SR128 User Manual

Rev. A

Figure 4. PCD-HOST 10 Pins - main connector pin out configuration

Connector USB-C2 Connector B2B connector PCD-Host 10-pin conn PCD-Reader Antenna conn

Table 2. PCD-APP board PCB main connectors Function USB interface for reader operating in PCSC/CCID mode For expansion to 8 SAM Reader power input and RS232/485 connectivity to HOST Connection to Antenna

Page 9

SR128 User Manual
2.2.3. PCD-Antenna board interfaces

Rev. A

Figure 5. PCD-Reader-Antenna board PCB

Table 3. PCD-READER ANTENNA board PCB main connector

Connector

Function

PCD-Reader Antenna conn Antenna connection to reader

Page 10

SR128 User Manual
2.3. Assembly
2.3.1. Contactless Product Assembly

Rev. A

Figure 6. Top view

Figure 7. Bottom view
© Copyright 2022 STYL Solution Pte., Ltd., All rights reserved

Page 11

SR128 User Manual
2.3.2. Physical dimension

Rev. A

Figure 8. Physical dimension without cables

Figure 9. Physical dimension with cables
© Copyright 2022 STYL Solution Pte., Ltd., All rights reserved

Page 12

SR128 User Manual

Rev. A

3. Specifications

3.1. Operating Conditions

No. Specification 1 Temperature 2 Temperature

Type Min. Typ. Max. Unit Remarks Operating -10 - +60 oC Storage -20 - +85 oC

3 Humidity

Relative 0

- 95 % non-condensing

3.2. Power Supply
No. Specification 1 10 Pin Connector
2 USB C1
3 USB C2

Type Min. Typ. Max. Unit Remarks

Voltage - 12 - VDC

Current -

- 650 mA

Voltage -

- VDC

500 900 mA 500mA (for USB2.0)

Current

or 900mA (for USB3.1)

1500 mA USB PD support

Voltage -

- VDC

Current

500 900 mA 500mA (for USB2.0) or 900mA (for USB3.1)

3.3. Processors and Controller

No. Specification

Description

1 Processor

Application: iMX6 dual-core ARM Cortex-A9 800MHz

RF: Maxim Secure ARM Cortex-M3 108MHz

2 Memory

2GB DDR RAM and 4GB NAND Flash

3.4. Indicator
No. Specification 1 LED Indicators 2 Alert

Description Power LED, RGB status LED DC Buzzer

3.5. PCD
No. Specification 1 Carrier Frequency 2 Standard compliance

Description 13.56MHz ISO/IEC 14443-1 to 14443-4 Type A & B ISO/IEC 15693 Sony FelicaTM ECMA-340, ECMA-352 and ISO18092

Page 13

SR128 User Manual

Rev. A

No. Specification 3 Baud-rate 4 Card type supported 5 Communication Range

Description 106kbps, 212kbps, 424kbps, 848kbps All ISO 14443-X contactless cards CPU-based card: up to 8.5cm Memory-based card: up to 10cm

3.6. Data Communication Interface

No. Specification

Description

1 USB interface

USB Type C

2 Serial interface

RS232/422/485

Baud-rate configurable 9600, 19200, 115200 and 230400 kbps

3.7. Standards & Certification

No. Specification

Description

1 EMC

EN50121-4 - Railway applications

2 Regulatory

CE / FCC approved

3 EMV

EMV L1 v3.1a

VISA payWave L2 VCPS v2.2c and VCTKS 1.1a

MasterCard PayPass L2 v3.1.4

4 Shock

Acceleration: 20g, Pulse duration: 11ms, Direction: 3

perpendicular axes, No of shocks: 5 per axes

5 Vibration

IEC-68 part 2-31 and DIN EN 60721-3-5 class 5M2

Page 14

SR128 User Manual

Rev. A

4. Reader Connection
The SR128 reader interfaces with the host via the 10pin serial and power connection when operating hostreader configuration.

Host

12 VDC RS232/RS485

SR128 Reader

SAM Board

APP Board

10-Pin Interface (RS232/RS485)
USB C2 Interface

Antenna Board
Assembly

In PCSC/CCID mode, the host can connect to the reader using the USB-C2 interface. The reader will present itself as a standard PCSC reader to the Operating System.

Host

For CCID Mode

SR128 Reader

SAM Board

APP Board

10-Pin Interface (RS232/RS485)
USB C2 Interface

Antenna Board
Assembly

Page 15

SR128 User Manual

Rev. A

5. Installing and Replacing SAM card

Figure 10. SAM cards position in bottom view
· Installing and Uninstalling SAM card
Step 1: Push the metal lock of the sim towards the arrow
Step 2: Open the cover and insert the SAM card inside and then close the cover and wipe the metal lock towards the arrow

Page 16

SR128 User Manual

Rev. A

Step 4: Reversed the Step to take out the SAM Card.
6. Operational Precautions
6.1. General Safety Instructions
The SR128 reader contains ESD sensitive components. When handling with the device, avoid in contact with components especially the ICs on the boards. The operating voltage of the SR128 reader has 12VDC. The 10pin connector accepts 12VDC. Operating the SR128 reader other than the rated voltage will experience performance deterioration or damage the reader.
6.2. Installation
The SR128 Reader uses inductive coupling to communicate with contactless cards. Therefore, the reader is highly sensitive to ferrous or non-ferrous metal alike. Installation near to metal may affect operating distance. It is important to keep a comfortable distance away these metal surfaces for optimum performance.

Page 17

SR128 User Manual

Rev. A

6.3. Reader Status Indicators
There are LED indicators and DC Buzzer located on Reader module APP/SAM boards for various Reader status indicators.

No Color 1 WHITE 2 RED 3 GREEN 4 YELLOW 5 BLUE 6 PURPLE 7 CYAN 8 RED 9 GREEN
10 YELLOW

Freq (Hz)

Meaning

No Error

Power Supply OVER 12V

Power Supply UNDER 12V

PN5190 NO RESPONSE

SAM NO RESPONSE

TEMP SENSOR NO RESPONSE

TEMP SENSOR OVERHEAT

ANTENNA DETUNED

RF PROCESS RAM CHECK FAILED

RF PROCESS NO RESPONSE

No Color 1 RED 2 RED 3 OFF

Meaning Remaining NO ERROR
Blinking USB CCID mode SAM Board cannot boot

Page 18

SR128 User Manual

Rev. A

6.4. Battery Safety Information
CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS
a. Use only CR1220, BATTERY LITHIUM COIN 3V 20MM. Observe the following guidelines for safe use of Li Ion batteries.
b. Do not expose the battery to excessive heat or cold. Do not short-circuit. It may explode. c. To avoid risk of fire, burn or damage to your battery, do not allow a metal object to touch battery
contacts. d. Do not disassemble the battery. There are no user serviceable parts inside. e. If battery leakage is observed, avoid any contact with affected area and properly dispose of the
battery. f. If you come in contact with battery leakage, rinse exposed area with soap and water. If it contacts
the eye, flush the eye with water for 15 minutes and seek medical attention. g. When discarding a battery, contact your local waste disposal provider to understand local
restrictions for disposal or recycling of batteries.
6.5. Fuse Information
This product contains Fuses in its circuit. The Fuse part numbers are 1206L150/12SLYR; PTC RESET FUSE 12V 1.5A 1206 (Littelfuse).

7. FCC Compliance Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
· Reorient or relocate the receiving antenna.
· Increase the separation between the equipment and receiver.
· Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
· Consult the dealer or an experienced radio/TV technician for help.

Page 19

SR128 User Manual

Rev. A

Important: Caution: Any changes or modifications not expressly approved by the party responsible for compliance to this equipment would void the user's authority to operate this device.

Page 20

Microsoft Word 2019