Instruction Manual for PERLESMITH models including: PERLESMITH, PSTVS04, Table Top TV Stand
索奥尔 PSTVS04-Manual-V3.0-SAE-2020.09.29 Created Date: 6/7/2021 6:16:42 PM ...
PSTVS04 Installation Manual (PDF) PERLESMITH PERLESMITH PERLESMITH,Universal,TV,Stand,Table,Top,TV,Stand,for,37-55,inch,LCD,LED,TVs,-,Height,Adjustable,TV,Base,Stand,with,Tempered,Glass,Base,&,Wire,Management,,VESA,400x400mm,,
PERLESMITH Universal TV Stand - Table Top TV Stand for 32-55 inch LCD LED TVs - Height Adjustable TV Base Stand with Tempered Glass Base & Wire Management, VESA 400x400mm : Home & Kitchen
File Info : application/pdf, 12 Pages, 7.80MB
DocumentDocumentTable Top TV Stand Instruction Manual V4.0 Model: PSTVS04 Thank you for choosing this PERLESMITH product! At PERLESMITH we strive to provide you with the best quality products and services in the industry. Should you have any issues, please don't hesitate to contact us at Technical Support: 1-800-556-6806 Mon-Fri 8am - 8pm(CST) Other Info: supportus@perlesmith.com(US) supportca@perlesmith.com(CA) WE'RE HERE TO HELP Want to watch a video that show how to install the TV brackets. Watch it now at: https://youtu.be/MYjAmxcl1go Want to watch a video that show how to add the safety locks. Watch it now at: https://youtu.be/kC4JmnNCDwM IMPORTANT SAFETY INFORMATION Please carefully read all instructions before attempting installation. If you do not understand the instructions or have any concerns or questions, please contact our customer service at supportus@perlesmith.com (US)/ supportca@perlesmith.com (CA). CAUTION: Avoid potential personal injuries and property damage! Do not use this product for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity. We are not liable for damage or injury caused by improper mounting, incorrect assembly or inappropriate use. P1 Weight Restrictions 88lbs/ 40kg If your TV weighs more, this TV stand is NOT compatible. WARNING DO NOT exceed the maximum weight indicated. This TV stand is intended for use only within the maximum weights indicated. Use with products heavier than the maximum weights indicated may result in failure of the TV stand and its accessories, causing possible damage and or injury. Check the VESA Pattern of TV before the Installation MAX: 400mm/16 in 100 mm 4 in 200 mm 7 7/8 in 300 mm 11 3/4 in 400 mm 15 3/4 in MAX: 400mm/16 in Minimum VESA pattern: 100mm/4 in(W)x100mm/4 in(H) If your TV VESA is greater than 400x400 mm/16x16 in or less than VESA 100x100mm/4x4in, this TV stand is NOT compatible. If this TV stand is NOT compatible, please contact customer service at supportus@perlesmith.com (US)/ supportca@perlesmith.com (CA) to find a compatible product. Tools Needed (Not lncluded) Phillips Screwdriver P2 Wrench Supplied Parts and Hardware WARNING: This product contains small items that could be a choking hazard if swallowed. Before starting assembly, verify all parts are included and undamaged. Do not use damaged or defective parts. lf you require replacement parts, contact our customer service at supportus@perlesmith.com (US)/ supportca@perlesmith.com (CA). · Please note: Not all hardware included in this package will be used. Supplied Parts and Hardware for Step 1 Note: The bolt is shown in accordance with the actual size (L) x3 M6x25mm Bolt (W) x4 Foot Pad (R) x1 Gasket with 3 Holes (Y) x1 Plastic Cover (P) x1 Support Pillar (O) x1 Tempered Glass Base (Z) x1 Top Cover (V) x1 5/32in (4mm) Allen Key Supplied Parts and Hardware for Step 2 Note: The bolt is shown in accordance with the actual size (S) x4 M6x40mm Bolt (M) x1 TV Plate (T) x4 D6.5 Washer P3 (Q) x4 M6 Nut (V) x1 5/32in (4mm) Allen Key Supplied Part for Step 3 (K) x2 Wire Clip Supplied Parts and Hardware for Step 4 (N) x2 TV Bracket (G) x4 Washer Note: The bolts and spacers are shown in accordance with the actual size (A) x4 M4x30mm Bolt (B) x4 M6x15mm Bolt (C) x4 M6x35mm Bolt (D) x4 M8x20mm Bolt (E) x4 M8x35mm Bolt (F) x4 M8x50mm Bolt (H) x8 8.5x18x2.5mm Spacer (I) x4 8.5x18x10mm Spacer P4 (J) x4 8.5x18x22mm Spacer Supplied Part and Hardware for Step 5 (K1) x2 Safety Lock Step 1 Assemble the Base Step 1-1 Place foot pads [W] to the frosted side of the tempered glass base [O] in the corners W O Step 1-2 Connect the support pillar [P] to tempered glass base [O] Attach the top cover [Z] to the support pillar [P] Secure the support pillar [P] to tempered glass base [O] using plastic cover [Y], gasket with 3 holes [R], bolts [L] and Allen key [V] Note: You may need assistance with this step. Back Side Z Front Side V P L O Y R R L V Note: Make sure the side with the wire clip holes on the support pillar faces the back of the stand O Table P Note: The paper side of the gasket with 3 holes [R] should be touched the tempered glass base [O] P5 Step 2 Connect the TV Plate [M] to Support Pillar [P] Note: There are three choices for height adjustment. You can choose your desired height position while connecting the TV plate [M] to support pillar [P] The First Choice The Second Choice The Third Choice The First Choice The Second Choice The Third Choice M V S Note: You may need assistance with this step. P Front Connect TV plate [M] to support pillar [P] using bolts [S], washers [T] and nuts [Q] Note: Connect the TV plate [M] to the front side of the support pillar [P] with the bump of the TV plate facing back side of the stand. P6 TQ Back [Not Included] Step 3 Secure the Wire Clips [K] to Support Pillar [P] K P Step 4 Secure the TV Brackets [N] to TV Select TV Bolts Only one bolt size fits your TV. M4 M6 M8 Bolt length: Verify adequate thread engagement with bolts or bolts/spacers combination. We recommend thread engagement by at least 5 turns. -Too short will not hold the TV. -Too long will damage the TV. Too Short Too Long Correct Correct Please Note: The provided TV bolts meet most of today's TVs design. However, some TVs require special bolts which may not be in the hardware bag. In this case we offer our "PSUHP" Universal Hardware Kit which provides a large selection of bolts that can meet the demand of older and unique applications. Please Note: When using the spacers it is important to note that they can be used in multi-layers (meaning stacked). If you have any difficulty understanding how to install the TV bolts or spacers, please contact customer service at supportus@perlesmith.com (US)/ supportca@perlesmith.com (CA). P7 CAUTION: Ensure the TV brackets [N] are EQUALLY CENTERED on your TV and securely fastened in place. N Please note: The bolt hole locations on your TV may vary in accordance of the manufacturers design of the TV. We are only illustrating possible locations of the bolt holes. Option A ( For Flat Back TV ) A/B/D G H/I (If needed) Alternate Spacer Setups Option B (For Round Back TV) A/C/E/F G Note: Keep the arrow up H/I/J Alternate Spacer Setups Note: Keep the arrow up P8 Option C (For TV with A "Bump") Spacers may be necessary for 2 holes ONLY. A/C/E/F G H/I/J A/B/D G H/I (If needed) Alternate Spacer Setups Alternate Spacer Setups Note: Keep the arrow up Option D For cable interference or inset holes, use spacers [H], [I] and [J] to create extra space between the TV and TV brackets Alternate Spacer Setups H/ I/ J N A/ C/ E/ F NG P9 Step 5 Attach TV to the TV Plate [M] and Manage the Wires TV brackets are two-height-adjustable. You can choose the proper height. The First Choice The Second Choice Step 5-1 Hang the TV with brackets to the TV plate Step 5-2 Push the bottom of the TV to TV plate Step 5-3 Insert the safety locks [K1] into the upward facing hooks at the midway to lower part of the TV bracket. Please note this is where the lower part of the TV bracket meets the TV plate. Then tighten the bolts of the safety lock [K1] until the bolts touch the TV plate. HEAVY! You may need assistance with this step. "Be gentle" K1 Note: Please note, there is no bolt holes in the TV plate P10 Thank you again for choosing this PERLESMITH product! All of us at PERLESMITH do appreciate your product purchase. We hope that you are as happy with your product as we designing and manufacturing it for you. We strive to provide you with the best quality products and services in the industry. If you have any questions please don't hesitate to contact us at Technical Support: 1-800-556-6806 Mon-Fri 8am - 8pm(CST) Other Info: supportus@perlesmith.com(US) supportca@perlesmith.com(CA)