User Guide

Introduction

The outdoor weather station can connect to various RS485 sensors, including temperature and humidity, wind speed, wind direction, rainfall, solar radiation, CO₂, noise, PM, barometric pressure, soil temperature and moisture, soil EC, and soil pH. Sensor combinations can be customized according to user requirements. The pole is made of galvanized steel pipe, providing excellent resistance to rain, rust, and corrosion for long-term durability. It can be equipped with a solar panel and battery for outdoor measurement without the need for an external power supply. An optional large LED display screen offers clear, real-time data visualization.

Applications

This product is suitable for outdoor air quality monitoring, greenhouse environments, and construction site dust monitoring and other scenarios.

Features

Flexible sensor configuration
Weatherproof and corrosion-resistant for long-lasting use

Specification

Specification
Model	UB-WS-A1
Pole Height	1.5 m / 2 m / Customizable
Pole Diameter	76 mm / 114 mm
Pole Material	Galvanized Steel Pipe
Installation Method	Adjustable Cross Arm

Note

Before installation, ensure that the base is properly secured by pre-embedding an anchor cage or installing anchor bolts in advance.
Route sensor cables inside the pole to prevent exposure to direct sunlight and damage by birds.
Mount the GPRS antenna on the outside of the waterproof enclosure to ensure stable signal reception.
If using a solar panel, make sure there are no surrounding obstructions. Position the panel facing south at a 45° angle to the ground.

Optional

LED Display: Must support RS485 communication and comply with the specified protocol format.
Solar Power Supply: It is recommended that the solar panel provide at least 40 W / 18 V. The battery system should use a ternary lithium battery with a capacity of at least 20 Ah and an output of DC 12 V, min 2 A. The output interface should be DC5521 for connection to GS1 series devices.

	UbiBot UB-SPH-N1 Soil pH Sensor User Guide User guide for the UbiBot UB-SPH-N1 Soil pH Sensor. Learn about its features, specifications, use case scenarios, measurement methods, and Modbus-RTU communication protocols for accurate soil pH monitoring in agriculture, horticulture, and environmental applications.
	UBIBOT UB-WS-A1 Outdoor Weather Station User Guide Comprehensive user guide for the UBIBOT UB-WS-A1 outdoor weather station, detailing its features, specifications, and installation methods for various environments. Learn how to set up the station for accurate environmental monitoring.
	UBIBOT UB-STH-N1 Soil Moisture, Temperature, and Humidity Sensor User Guide Comprehensive user guide for the UBIBOT UB-STH-N1 soil sensor, detailing its features, specifications, wiring, measurement methods, and communication protocols for accurate soil condition monitoring.
	UBIBOT UB-WS-N1 Wind Speed Sensor User Guide and Specifications Comprehensive user guide for the UBIBOT UB-WS-N1 three-cups wind speed sensor. Includes product introduction, use cases, features, detailed specifications, wiring instructions, communication protocols, and cautions for environmental monitoring applications.
	UBIBOT UB-CO2 Series CO2 Sensor User Guide and Specifications Comprehensive user guide and technical specifications for the UBIBOT UB-CO2 series industrial-grade carbon dioxide sensors, detailing features, use cases, communication protocols, and register addresses.
	UBIBOT UB-WD-N1 Wind Direction Sensor User Guide Comprehensive user guide for the UBIBOT UB-WD-N1 wind direction sensor, detailing its features, specifications, mounting, wiring, and communication protocols for environmental monitoring.
	UB-ATHP-N1 Atmospheric Pressure Sensor User Guide User guide for the UB-ATHP-N1 atmospheric pressure sensor by UBIBOT, detailing its features, specifications, communication protocols, and wiring instructions for environmental monitoring.
	UB-RA-N1 Rainfall Sensor User Guide Comprehensive user guide for the UB-RA-N1 rainfall sensor, detailing its features, specifications, mounting instructions, wiring, communication protocols, and maintenance for agricultural and industrial outdoor use.