Welcome to the Family

Your Mr Maria Design as a Companion

Your Mr Maria design was designed and produced with love in the Netherlands. Our light designs are made of high quality polyethylene to ensure that they are durable enough to remain part of your family for a lifetime.

Your Mr Maria Design as a Source of Light

Besides being a stylish presence in the room, your Mr Maria design is also a source of light. The sustainable LED light source was designed by Mr Maria and will last for many years. If you need a replacement, we'll make sure that you can always order one from us.

Warranty

There's a 24-month warranty on your Mr Maria design*; after this time period, we will continue to assist you with repairs by providing replacement parts. Please contact our customer service by visiting www.mrmaria.com

*Valid when the design is used correctly as described in this manual.

Your chosen friend will accompany you through all of life's moments, both big and small. At breakfast each day, for birthdays, and through every house move, your Mr Maria design will be by your side. Creating a home and a life full of light, together.

Package Contents

• Your Mr Maria design with the LED light source
• User Kit containing:
• Low voltage USB adapter plug
• Power cable (USB)
• This manual

If you ordered this item as a Replacement Kit, this box will also contain a separate LED light source. Simply use the screws currently holding the old LED light source in place to mount the new LED to your design. Proceed by following the instructions to the right.

Controls

Fig. 2 on page 3 shows the dimmer button, which is located on the power cable.

• DIM - Use button A (-) and C (+) to make the light dimmer or brighter respectively
• ON/OFF - Use button B

There are six brightness settings.

Make It Shine

Look at Fig. 1 on page 3.

1. Use a screwdriver (not included) to unscrew the strain relief (1) on the LED light source located on the bottom of the design. There are two small screws(*).
2. Connect the power cable (2) to the LED light source by sliding it into the USB port.
3. Strengthen the connection between the cable and the LED light source by reattaching the strain relief (1) with the two screws (*).
4. Connect the cable to the USB adapter plug.
5. Insert the plug into a power socket.
6. Use the switch on the cable (Fig. 2) to turn on the light.

If there is a part missing or the product doesn't work, please contact the store where you purchased the product.

Warning!

• The product is not a toy and children using the product must be supervised by an adult at all times.
• The product contains small parts. Make sure they are securely attached, and keep the product out of the reach of children.
• This lamp should be used indoors and is not waterproof. Do not immerse it in water.
• When cleaning the product, always disconnect the adapter from the power socket. Clean it with a duster or a damp cloth.
• Keep the packaging out of the reach of children.
• In the event of a malfunction, do not disassemble the LED light source yourself.
• Keep this manual for later reference.

The light source contained in this luminaire shall only be replaced by the manufacturer or his service agent or a similar qualified person.

The Symbols

A: A reference to this manual.

[Recycle symbol]: The LED module is an electronic device and does not belong in the household rubbish but should be disposed of at the place indicated by your municipality.

[Class III symbol]: Symbol for Class III appliance. This symbol on the bottom of the unit LED means that the device operates on extra low voltage which is less than 50 volts alternating current.

CE FCC REACH ROHS: Symbol indicating that this product is CE, FCC, KC, RCM, REACH & RoHS approved.