ASSEMBLY INSTRUCTION
Thank you for purchasing the quality product. Be sure to check all packing material carefully for small parts which may have come loose inside the carton during shipment. Separate, identify and count all parts and metal hardware. Compare with all parts list to be sure all parts are present. If any part(s) are missing or damaged, please contact your local furniture dealer. For efficient and speedy service, please indicate the model number and code letter of part(s) needed.
***Do not fully tighten screws until fully assembled***
COMPONENT PARTS
| DESCRIPTION | PART NAME | Q'TY (PCS) |
|---|---|---|
| P1 | CHAIR BACK | 2 |
| P2 | BOX SEAT | 2 |
| P3 | CHAIR FRONT LEG | 4 |
HAREWARES REQUIRED
- H1: JCBC BOLT M6 x 35MM - 4 PCS
- H2: JCBC BOLT M6 x 70MM - 16 PCS
- H3: SPRING WASHER - 20 PCS
- H4: FLAT WASHER - 20 PCS
- H5: ALLEN KEY - 1 PC
Attention
*** Some number parts listed on the instruction sheet may not be in parts bag as they may already be assembled. Carefully check parts and packing materials prior to ordering replacements.
How to assemble:
STEP 1:
Attach the Chair Back (P1) to the Box Seat (P2). Use JCBC Bolts M6 x 35mm (H1), Spring Washers (H3), and Flat Washers (H4). Secure using the Allen Key (H5). Note: Do not fully tighten screws yet.
Diagram Description: Shows the Chair Back (P1) being connected to the Box Seat (P2). A close-up illustrates the assembly of a bolt (H1), spring washer (H3), and flat washer (H4) through pre-drilled holes, to be tightened with an Allen Key (H5).
STEP 2:
Attach the Chair Front Legs (P3) to the base of the chair assembly. Use JCBC Bolts M6 x 70mm (H2), Spring Washers (H3), and Flat Washers (H4). Secure using the Allen Key (H5).
Diagram Description: Shows the Chair Front Legs (P3) being attached to the main chair structure. A close-up details the insertion of a bolt (H2), spring washer (H3), and flat washer (H4), to be tightened with the Allen Key (H5).
