TITAN TTI885IPD 18V 2.0Ah Li-Ion TXP Cordless Impact Driver Instruction Manual

Instruction Manual for TITAN models including: TTI885IPD, 18V 2.0Ah Li-Ion TXP Cordless Impact Driver, TXP Cordless Impact Driver, Impact Driver, TTI885IPD, Driver

TT TTI885IPD GB V01 220216

Instruction Manual

Titan TTI885IPD 18V 2.0Ah Li-Ion TXP Cordless Impact Driver | Impact Drivers & Wrenches | Screwfix.ie

File Info : application/pdf, 36 Pages, 2.03MB

pa 2637063

Original Instructions_MNL_TTI885IPD_GB_V01_220216

TTI885IPD

WARNING: Read the instructions before using the product! V11221 / BX220IM

MNL_18V IMPACT DRIVER_MID18-LI_IMGB_V1_211224.indd 1

2021/12/23 10:31 PM

Let's
get started...
These instructions are for your safety. Please read through them thoroughly before use and retain them for future reference.

Getting started...

Technical and legal information

Your product

Technical

Before you start

In more detail...

Product functions

Operation

Care and maintenance

Troubleshooting

Recycling and disposal

Guarantee

Declaration of conformity

02
MNL_18V IMPACT DRIVER_MID18-LI_IMGB_V1_211224.indd 2

2021/12/23 10:31 PM

Getting started...

TTI885IPD

Safety information EN

Safety warnings
General power tool safety warnings
WARNING! Read all safety warnings, instructions, illustrations and specifications provided with this power tool. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term "power tool" in the warnings refers to your mains-operated (corded) power tool or batteryoperated (cordless) power tool.
1) Work area safety a) Keep work area clean and well lit. Cluttered or dark
areas invite accidents. b) Do not operate power tools in explosive
liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes. c) Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.
2) Electrical safety a) Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools.
of electric shock.

MNL_18V IMPACT DRIVER_MID18-LI_IMGB_V1_211224.indd 3

03
2021/12/23 10:31 PM

EN Safety information

TTI885IPD

Getting started...

Safety warnings

b) Avoid body contact with earthed or grounded surfaces, as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.
c) Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.
d) Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock.
e) When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock.
f) If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) protected supply. Use of an RCD reduces the risk of electric shock.
3) Personal safety a) Stay alert, watch what you are doing and use
common sense when operating a power tool. Do not use a power tool while you are tired or under

A moment of inattention while operating power tools may result in serious personal injury. b) Use personal protective equipment. Always wear eye protection. Protective equipment such as a dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries.
04

MNL_18V IMPACT DRIVER_MID18-LI_IMGB_V1_211224.indd 4

2021/12/23 10:31 PM

TTI885IPD

Safety information EN

Getting started...

c) Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power source and/or battery pack, picking up or carrying the tool. switch or energising power tools that have the switch on invites accidents.
d) Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury.
e) Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.
f) Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts.
g) If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of dust collection can reduce dust-related hazards.
h) Do not let familiarity gained from frequent use of tools allow you to become complacent and ignore tool safety principles. A careless action can cause severe injury within a fraction of a second.
4) Power tool use and care a) Do not force the power tool. Use the correct power
tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed. b) Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.
05

MNL_18V IMPACT DRIVER_MID18-LI_IMGB_V1_211224.indd 5

2021/12/23 10:31 PM

Getting started...

EN Safety information

TTI885IPD

Safety warnings
c) Disconnect the plug from the power source and/ or remove the battery pack, if detachable, from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.
d) Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.
e) Maintain power tools and accessories. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool's operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.
f) Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.
g) Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation.
h) Keep handles and grasping surfaces dry, clean and free from oil and grease. Slippery handles and grasping surfaces do not allow for safe handling and control of the tool in unexpected situations.

06
MNL_18V IMPACT DRIVER_MID18-LI_IMGB_V1_211224.indd 6

2021/12/23 10:31 PM

Getting started...

TTI885IPD

Safety information EN

5) Battery tool use and care a)
manufacturer. A charger that is suitable for one type
with another battery pack. b)
battery packs. Use of any other battery packs may
c) When battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws or other small metal objects, that can make a connection from one terminal to another. Shorting the battery terminals together may cause
d) Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact
contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns. e) Do not use a battery pack or tool that is damaged or

risk of injury. f)
or excessive temperature. temperature above 130 °C may cause explosion. g) Follow all charging instructions and do not charge the battery pack or tool outside the temperature
Charging
range may damage the battery and increase therisk

MNL_18V IMPACT DRIVER_MID18-LI_IMGB_V1_211224.indd 7

07
2021/12/23 10:31 PM

EN Safety information

TTI885IPD

Getting started...

Safety warnings

6) Service a)
person using only identical replacement parts. This will ensure that the safety of the power tool is maintained. b) Never service damaged battery packs. Service of battery packs should only be performed by the manufacturer or authorized service providers.
Impact driver safety warnings 1. Hold power tool by insulated gripping surfaces,
when performing an operation where the fastener may contact hidden wiring. Fastener contacting a "live" wire may make exposed metal parts of the power tool "live" and could give the operator an electric shock.
Additional safety warnings for battery pack a) Battery pack needs to be charged before use.
Always refer to the charger's instruction and charge it properly. b) Remove the battery pack from the product when not in use. c) Don't maintain the battery pack on the charger when not in use. d) After extended periods of storage, it may be necessary to charge and discharge the battery pack several times to obtain the maximum performance. e) Longer life and better performance can be obtained if the battery is charged when the air temperature is between 18°C and 24°C. Do not charge the battery in air temperature below 5 °C or above 40 °C. This is important as it can prevent serious damage to the battery.
08

MNL_18V IMPACT DRIVER_MID18-LI_IMGB_V1_211224.indd 8

2021/12/23 10:31 PM

TTI885IPD

Safety information EN

Getting started...

f) Do not charge battery in a damp or wet location. Following this rule will reduce the risk of electric shock.
g) Do not disassemble the battery and avoid mechanical damage to the battery. Risk of short circuit and fumes may be emitted. Ensure fresh air and seek medical assistance in the event of discomfort.
h) When disposing of battery pack, keep the battery pack of different electrochemical systems separate from each other.
The following information applies to professional users only but is good practice for all users:
ADDITIONAL SAFETY WARNING FOR CONSTRUCTION DUST The updated Control of Substances Hazardous to Health Regulations 1st October 2012 now also targets to reduce the risks associated with silica, wood and gypsum dusts. Construction workers are one of the at- risk groups within this because of the dust that they breathe: silica dust is not just a nuisance; it is a real risk to your lungs! Silica is a natural mineral present in large amounts in things like sand, sandstone and granite. It is also commonly found in many construction materials such as
dust (also known as Respirable Crystalline Silica or RCS) during many common tasks such as cutting, drilling and
silica can lead to the development of: · Lung cancer · Silicosis · Chronic Obstructive Pulmonary Disorder / Chronic obstructive pulmonary disease (COPD)

MNL_18V IMPACT DRIVER_MID18-LI_IMGB_V1_211224.indd 9

9
2021/12/23 10:31 PM

Getting started...

EN Safety information

TTI885IPD

Safety warnings

the development of Asthma. The risk of lung disease is linked to people who regularly breathe construction dust over a period of time, not on the odd occasion. To protect the lung, the COSHH Regulations sets a limit on the amount of these dusts that you can breathe (called a Workplace Exposure Limit or WEL) when averaged over a normal working day. These limits are not a large amount of dust: when compared to a penny it is tiny like a small pinch of salt: This limit is the legal maximum; the most you can breathe after the right controls have been used.
HOW TO REDUCE THE AMOUNT OF DUST? · Reduce the amount of cutting by using the best sizes of building products. · Use a less powerful tool e.g. a block cutter instead of angle grinder. · Using a different method of work altogether e.g. using a nail gun to direct fasten cable trays instead of
Please always work with approved safety equipment,
out microscopic particles and use the dust extraction facility at all time. For more information please see the HSE website: http://www.hse.gov.uk/construction or http://www.hse.gov. uk/pubns/cis69.pdf

10
MNL_18V IMPACT DRIVER_MID18-LI_IMGB_V1_211224.indd 10

2021/12/23 10:31 PM

TTI885IPD

Safety information EN

Getting started...

WARNING! Some dust particles created by power sanding, sawing, grinding, drilling and other construction jobs contain chemicals known to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are: · Lead from lead-based paints. · Crystalline silica from bricks and cement and
other masonry products. · Arsenic and chromium from chemically treated
timber. Your risk from these exposures varies, depending upon how often you do this type of work. To reduce your exposure to these chemicals: · Work in a well-ventilated area. · Work with approved safety equipment, such as
those dust masks that are specially designed to

VIBRATION The European Physical Agents (Vibration) Directive has been brought in to help reduce hand arm vibration syndrome injuries to power tool users. The directive requires power tool manufacturers and suppliers to provide indicative vibration test results to enable users to make informed decisions as to the period of time a power tool can be used safely on a daily basis and the choice of tool. SEE TECHNICAL SPECIFICATIONS IN THE INSTRUCTION MANUAL FOR THE VIBRATION LEVELS OF YOUR TOOL. The declared vibration emission value should be used as a minimum level and should be used with the current guidance on vibration.
11

MNL_18V IMPACT DRIVER_MID18-LI_IMGB_V1_211224.indd 11

2021/12/23 10:31 PM

Getting started...

EN Safety information
Safety warnings

TTI885IPD

the HSE website has further information. The declared vibration emission value has been measured in accordance with a standardised test and may be used to compare one tool with another.
The declared vibration emission value may also be used in a preliminary assessment of exposure.
WARNING! The vibration emission value during actual use of the power tool can differ from the declared value depending on the ways in which the tool is used: · How the materials are grinded, cut or drilled. · If the tool is in good condition and well maintained. · Use correct accessory for the tool and ensure it
is sharp and in good condition. · The tightness of the gripping handles. · The tool is being used as intended by its design
and these instructions. While working with this power tool, hand/arm vibrations occur.Adopt the correct working practices in order to reduce the exposure to vibration. This tool may cause hand-arm vibration syndrome if its use is not adequately managed.

12
MNL_18V IMPACT DRIVER_MID18-LI_IMGB_V1_211224.indd 12

2021/12/23 10:31 PM

TTI885IPD

Safety information EN

Getting started...

WARNING! Identify safety measures to protect the operator that are based on an estimation of exposure in the actual conditions of use (taking account of all parts of the operating cycle such as the times when the tool is switched off and when it is running idle in addition to the trigger time). Note: · The use of other tools will reduce the users' total
working period on this tool. · Helping to minimise your vibration exposure risk.
ALWAYS use sharp chisels, drills and blades. · Maintain this tool in accordance with these
instructions and keep well lubricated (where appropriate). · Avoid using tools in temperatures of 10 ºC or less. Plan your work schedule to spread any high vibration tool use across a number of days.

Health surveillance All employees should be part of an employer's health surveillance scheme to help identity any vibration related diseases at an early stage, prevent disease progression and help employees stay in work.
Vibration and noise reduction To reduce the impact of noise and vibration emission, limit the time of operation, use low-vibration and low-noise operating modes as well as wear personal protective equipment. Take the following points into account to minimise the vibration and noise exposure risks: a) Only use the product as intended by its design and
these instructions. b) Ensure that the product is in good condition and well
maintained.
13

MNL_18V IMPACT DRIVER_MID18-LI_IMGB_V1_211224.indd 13

2021/12/23 10:31 PM

Getting started...

EN Safety information

TTI885IPD

Safety warnings
c) Use correct attachments for the product and ensure they are in good condition.
d) Keep tight grip on the handles/grip surface. e) Maintain this product in accordance with these
instructions and keep it well lubricated (where appropriate). f) Plan your work schedule to spread any high vibration tool use across a longer period of time. g) Prolonged use of the product exposes the user to vibrations that can cause a range of conditions collectively known as hand-arm vibration syndrome
diseases such as carpal tunnel syndrome. To reduce this risk when using the product, always wear protective gloves and keep your hands warm.
Emergency Familiarise yourself with the use of this product by means of this instruction manual. Memorise the safety directions and follow them to the letter. This will help to prevent risks and hazards. a) Always be alert when using this product, so that
you can recognise and handle risks early. Fast intervention can prevent serious injury and damage to property. b) Switch the product off and remove the battery pack if there are malfunctions. Have the product checked
before you operate it again.

14
MNL_18V IMPACT DRIVER_MID18-LI_IMGB_V1_211224.indd 14

2021/12/23 10:31 PM

Getting started...

TTI885IPD

Safety information EN

Residual risks Even if you are operating this product in accordance with all the safety requirements, potential risks of injury and damage remain. The following dangers can arise in connection with the structure and design of this product: a) Health defects resulting from vibration emission if the
product is being used over long periods of time or not adequately managed and properly maintained. b) Injuries and damage to property due to broken cutting attachments or the sudden impact of hidden objects during use. c) objects or poor power tool accessories.
WARNING! This product produces an
may under some circumstances interfere with active or passive medical implants! To reduce the risk of serious or fatal injury, we recommend persons with medical implants to consult their doctor and the medical implant manufacturer before operating this product!

MNL_18V IMPACT DRIVER_MID18-LI_IMGB_V1_211224.indd 15

15
2021/12/23 10:31 PM

EN Safety information

TTI885IPD

Getting started...

Symbols

others the following symbols and abbreviations. Familiarise yourself with them to reduce hazards like personal injuries and damage to property.

Volt, (direct current voltage) mAh Milliampere per hour

/min or Per minute min-1

°C

Degree Celsius

Gram

Kilogram

mm Millimetre

Metre

Centimeter

dB(A) Decibel (A-rated)

No-load speed

m/s² Metres per second squared

Lock / to tighten or secure.

Unlock / to loosen.

Read the instruction manual.

Note / Remark. Caution / Warning.

xxWyy Manufacturing date code; year of manufacturing (20xx) and week of

manufacturing (Wyy)

Wear hearing protection.

Wear eye protection.

Wear a dust mask.

Wear protective gloves.

Wear protective, slip-resistant footwear.

Switch the product off and remove battery pack before assembly, cleaning, adjustments, maintenance, storage and transportation.
WEEE symbol. Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your Local Authority or local store for recycling advice.
Crossed out dust bin. Batteries and battery packs should not be disposed of with household waste. Please recycle where facilities exist. Check with your Local Authority or local store for recycling advice. Do not dispose of battery packs in rivers or immerse in water.

injury. 16
MNL_18V IMPACT DRIVER_MID18-LI_IMGB_V1_211224.indd 16

2021/12/23 10:31 PM

Getting started...

TTI885IPD

Safety information / Your product EN

Do note expose battery packs to heat in excess of 45 ºC. Do not charge

max. 45°C

or store the battery pack in temperatures below 0 °C (32 °F) and above 45 °C (113°F).

The product complies with the applicable European directives and an

evaluation method of conformity for these directives was done.

UK Conformity Assessed.

Your product

2 4

8 7

MNL_18V IMPACT DRIVER_MID18-LI_IMGB_V1_211224.indd 17

17
2021/12/23 10:31 PM

TTI885IPD

Your product
1. Tool holder 2. Sleeve 3. Air vents 4. Forward / reverse
rotation control 5. On/off switch

6. Handle 7. Belt clip 8. Work light 9. Battery pack
a) Batery capacity indicators

b) Battery capacity button c) Release button d) Battery docking port 10. Charger

NOTE: Parts marked with * are not shown in this overview. Please refer to the respective part in the instruction manual.

Getting started...

General

> Rated voltage

: 18 V

> Rated no load speed n0

: 0-2200 min-1

> Bit holder/ Tool socket

: Hex, 63.5mm

> Weight

: approx. 1.4kg

(Including battery pack)

Battery pack

> Model no.

: TTI801BAT

> Cell

: Li-Ion, 2 pcs

> Capacity

: 2000 mAh

> Voltage

: 18 V

> Weight

: approx. 0.4 kg

Charger for battery pack

> Model no.

: TTB804CHR

> Rated output

: 21.4V d.c., 2.4 A

Usable battery pack (sold separately)

> Model no.

: TTI802BAT

TTI803BAT

> Capacity

: 4000 mAh

5000 mAh

Usable charger (sold separately)

> Model no.

: TTB805CHR

> Rated output

: 21.4V d.c., 4 A

> Ambient temperature range for charger

and battery use

: 5 °C to 40 °C

Sound values

> Sound pressure level LpA

: 88.3 dB(A)

18 > Sound power level LWA

: 99.3 dB(A)

MNL_18V IMPACT DRIVER_MID18-LI_IMGB_V1_211224.indd 18

2021/12/23 10:31 PM

TTI885IPD

Getting started...

> Uncertainty KpA, KWA

: 3 dB(A)

Hand arm vibration values

> Impact tightening of fasteners of the

maximum capacity of the tool ah > Uncertainty K

: 9.06 m/s2 : 1.5 m/s2

The sound intensity level for the operator may exceed 80 dB(A) and ear protection measures are necessary. The declared vibration total values and the declared noise emission values have been measured in accordance with a standard test method (EN 62841-1 / EN 62841-2-2) and may be used for comparing one tool with another; they may also be used in a preliminary assessment of exposure.

WARNING! The vibration and noise emissions during actual use of the power tool can differ from the declared values depending on the ways in which the tool is used especially what kind of workpiece is processed; and need to identify safety measures to protect the operator that are based on an estimation of exposure in the actual conditions of use (taking account of all parts of the operating cycle such as the times when the tool is switched off and when it is running idle in addition to the trigger time).

Rating label explanation
TTI885IPD = Model number TT = TITAN I = 18V Lithium-Ion 885 = Serial Number IPD = Cordless Impact Driver
Unpacking
1. 2. Remove all packing materials and shipping devices if applicable. 3. Make sure the delivery contents are complete and free of any damage. If
contact your dealer. Using an incomplete or damaged product represents a hazard to people and property. 4. Ensure that you have all the accessories and tools needed for assembly and operation. This also includes suitable personal protective equipment.
19

MNL_18V IMPACT DRIVER_MID18-LI_IMGB_V1_211224.indd 19

2021/12/23 10:31 PM

EN Before you start

TTI885IPD

Getting started...

Unpacking
WARNING! The product and the packaging are not children's toys! Children must not play with plastic bags, sheets and small parts! There is a danger of choking and suffocation!

You will need

(items not supplied) Suitable personal protective equipment

(items supplied) Battery pack (9) Charger (10) and its manual

NOTE: The accessories required depend on the intended application. Ask your dealer for advice.

Assembly
WARNING! The product must be fully assembled before operation! Do not use a product that is only partly assembled or assembled with damaged parts! Follow the assembly instructions step-by-step and use the pictures provided as a visual guide to easily assemble the product! Do not connect the battery pack (9) to the product before it is completely assembled!

Driver bits
Different driver bits can be used with this product depending on the screw/bolt head.
WARNING! Always use driver bits according to the intended use! For example, never use a slotted driver bit for crosshead screws! Observe the technical requirements of this product (see section
Driver bits and screws/bolts become hot during use! Handle them carefully! Wear protective gloves when handling driver bits and screws/ bolts in order to avoid injuries like burns!
20

MNL_18V IMPACT DRIVER_MID18-LI_IMGB_V1_211224.indd 20

2021/12/23 10:31 PM

Getting started...

TTI885IPD

Before you start EN

Inserting / removing / replacing

1. Pull the sleeve (2) and insert a suitable bit holder all the way to the

2 1

stop into the tool holder (1). Release

the sleeve (2) to lock the bit holder in

place (Fig. 1).

2. Insert a suitable driver bit into the

socket of the bit holder.

3. Remove the driver bit and insert

a new one as described above if

desired.

Fig. 1

4. 50 mm long driver bits can be inserted directly into the tool holder (1).

5. Pull the sleeve to remove the bit holder after operation.

NOTE: Always use the bit holder with 25 mm driver bits. Do not insert a 25 mm driver bit into the tool socket! If the bit holder is not inserted deep enough into the tool socket, the sleeve will not return to its initial position and the bit holder will not be secured. Driver bits with 50mm can be inserted directly into the tool socket.

Battery pack
Attaching / releasing the battery pack 1. Lock the on/off switch (5) to avoid accidental starting by moving the forward
/ reverse rotation control (4) into the centre position (see below section "Product functions Forward / reverse rotation control"). 2. Align the battery pack (9) with the sliding slots of the battery docking port (9d) and slide the battery pack in to attach it. Ensure it clicks in place (Fig. 2). 3. Press the release button (9c) and slide the battery pack (9) from the battery docking port (9a) (Fig. 3).
9d
12

9
Fig. 2
MNL_18V IMPACT DRIVER_MID18-LI_IMGB_V1_211224.indd 21

Fig. 3

21
2021/12/23 10:31 PM

Getting started...

EN Before you start

TTI885IPD

Charging

Charging the battery pack The battery pack (9) for this product has been shipped in a low charge condition.
Refer to the charger's instruction manual for details.
Battery capacity indicators The battery pack (9) is equipped with the battery capacity indicators (9a) which are used to give an indication of the battery pack's remaining capacity. Press the battery capacity button (9b) to check battery capacity (Fig. 4). The LEDs will stay lit for approximately 10 seconds.

76-100%

51-75% 26-50% <25%

Fig. 4

22
MNL_18V IMPACT DRIVER_MID18-LI_IMGB_V1_211224.indd 22

2021/12/23 10:31 PM

TTI885IPD

In more detail...

Product functions

Operation

Care and maintenance

Troubleshooting

Recycling and disposal

Guarantee

Declaration of conformity

MNL_18V IMPACT DRIVER_MID18-LI_IMGB_V1_211224.indd 23

23
2021/12/23 10:31 PM

In more detail...

EN Product functions

TTI885IPD

Intended use

This product is intended for tightening and loosening screws, bolts, nuts with respective driver/hex nut driver bits. It must not be used for drilling and should not be used for working on materials that are dangerous to health. It must not be used for tightening or loosening car wheel nuts.
operation and to observe all the instructions therein. It must not be used for any purposes other than those described.

Forward / reverse rotation control

Change the rotation direction from forward to reverse by pressing the forward / reverse rotation control (4).
WARNING! Only change the rotational direction when the product is switched off and has come to a complete stop! Always ensure that the forward / reverse rotation control is adjusted to the correct position depending on the intended operation! Always push the forward / reverse rotation control as far as it will go! Do not use the product with the control switch in any other position!

1. Move the forward / reverse rotation control switch (4) to the left (as seen from the operator's position) in order to use the product in a clockwise rotational mode (Fig. 5).
2. Move the forward / reverse rotation control switch (4) to the right (as seen from the operator's position) in order to use the product in anticlockwise rotational mode (Fig. 6).
3. Move the forward / reverse rotation control switch (4) to the centre position to lock the on/off switch (5) and avoid accidental starting (Fig. 7).

Position

Rotational direction

Application

4
Fig. 5 24
MNL_18V IMPACT DRIVER_MID18-LI_IMGB_V1_211224.indd 24

Screw driving
2021/12/23 10:31 PM

In more detail...

TTI885IPD

Position

Rotational direction

Product functions EN
Application

4 Fig. 6

Remove screw

Fig. 7

Lock the on/off switch and avoid accidental starting

NOTE: rotational direction, a locking sound may be heard. This is normal and does not represent a defect.

Automatic work light
The work light (9) automatically illuminates by pressing the on/off switch (Fig. 8). 8

Fig. 8 WARNING! Do not look directly into the LED work light (8).

MNL_18V IMPACT DRIVER_MID18-LI_IMGB_V1_211224.indd 25

25
2021/12/23 10:31 PM

In more detail...

EN Product functions
Switching on/off
Ensure the forward / reverse rotation control (4) is not on centre lock position. 1. Switch the product on by pressing
the on/off switch (5) (Fig. 9). 2. Switch the product off by releasing
the on/off switch (5) (Fig. 9).

TTI885IPD
4 5

Fig. 9 WARNING! Never attempt to lock the on/off switch (5) in its ON position!

Speed control
Adjust the speed directly when operating with the built-in speed control. The on/ off switch (5) of this product is combined with a speed control. The speed is controlled by how far the on/off switch is depressed.
Belt Clip
WARNING! When the tool is attached to the belt, position yourself to avoid entanglement with surrounding objects.

The belt clip (9) can be assembled on the either side of the combi drill.

1. Set the forward / reverse rotation control (4) in the middle positon (lock) (Fig.

10).

. (Fig. 10).

3. The belt clip (9) can be hooked on your belt or pocket, etc (Fig. 11).

26
MNL_18V IMPACT DRIVER_MID18-LI_IMGB_V1_211224.indd 26

2021/12/23 10:31 PM

TTI885IPD

Product functions / Operation EN

In more detail...

Fig. 10

Fig. 11

General operation

1. Check the product, its battery pack and charger as well as accessories for damage before each use. Do not use the product if it is damaged or shows wear.
2. 3. Always hold the product on its handle. Keep the handle dry to ensure safe
support. 4. Ensure that the air vents are always unobstructed and clear. Clean them if
necessary with a soft brush. Blocked air vents may lead to overheating and damage the product. 5. Switch the product off immediately if you are disturbed while working by other people entering the working area. Always let the product come to complete stop before putting it down. 6. Do not overwork yourself. Take regular breaks to ensure you can concentrate on the work and have full control over the product.

WARNING! Keep in mind that there are buried objects hidden in every household! Ensure that there are no gas, water or power lines hidden in the working area that may be hit before operation danger of electrical shock and serious damage to people and property! Use a suitable detector to trace such objects in advance!

After use
1. Switch the product off, remove the battery back and let it cool down. 2. Remove the drill bit / chisel. 3. Check, clean and store the product as described below.

MNL_18V IMPACT DRIVER_MID18-LI_IMGB_V1_211224.indd 27

27
2021/12/23 10:31 PM

EN Care and maintenance

TTI885IPD

The golden rules for care
WARNING! Always switch the product off, remove the battery pack and let the product cool down before performing inspection, maintenance and cleaning work!

In more detail...

1. Keep the product clean. Remove debris from it after each use and before storage.
2. Regular and proper cleaning will help ensure safe use and prolong the life of the product.
3. Inspect the product before each use for worn and damaged parts. Do not

WARNING! Only perform repairs and maintenance work according to specialist!

General Cleaning
1. Clean the product with a dry cloth. Use a brush for areas that are hard to reach.
2. In particular clean the air vents (3) after every use with a cloth and brush. 3. Remove stubborn dust with high pressure air (max. 3 bar).
General Cleaning
NOTE: Do not use chemical, alkaline, abrasive or other aggressive detergents or disinfectants to clean this product as they might be harmful to its surfaces.
4. Check for worn or damaged parts. Replace worn parts as necessary or contact an authorised service centre for repair before using the product again.
Maintenance
Your tool requires no additional lubrication or maintenance. There are no user serviceable parts in your tool.

28
MNL_18V IMPACT DRIVER_MID18-LI_IMGB_V1_211224.indd 28

2021/12/23 10:31 PM

TTI885IPD

Care and maintenance EN

Repair
This product does not contain any parts that can be repaired by the consumer.
checked and repaired.
Storage
1. Switch the product off and remove the battery pack. 2. Clean the product as described above. 3. Store the product and its accessories in a dark, dry, frost-free, well-ventilated
place. 4. Always store the product in a place that is inaccessible to children. The ideal
storage temperature is between 10 °C and 30 °C. 5. We recommend using the original package for storage or covering the product
with a suitable cloth or enclosure to protect it against dust.
Transportation
1. Switch the product off and remove the battery pack. 2. Attach transportation guards, if applicable. 3. Always carry the product by its handle (6). 4. Protect the product from any heavy impact or strong vibrations which may
occur during transportation in vehicles. 5. Secure the product to prevent it from slipping or falling over.

In more detail...

MNL_18V IMPACT DRIVER_MID18-LI_IMGB_V1_211224.indd 29

29
2021/12/23 10:31 PM

EN Troubleshooting

TTI885IPD

In more detail...

Troubleshooting

Therefore check the product using this section. In most cases the problem can be solved quickly.
WARNING! Only perform the steps described within these instructions! All further inspection, maintenance and repair work must be performed

cannot solve the problem yourself!

Problem

Possible cause

Solution

1. Product does not start

1.1. Forward / reverse rota- 1.1. Push forward / reverse

tion control at centre lock rotation control to left or

position

right

1.2. Battery pack not properly 1.2. Attach properly attached

1.3. Battery pack discharged 1.3. Remove and charge battery pack

1.4. Battery pack damaged 1.4. Replace with a new one of the same type

1.5. Other electrical defect to 1.5. Check by a specialist

the product

electrician

2. Product does not reach full power

2.1. Battery pack capacity too 2.1. Charge battery pack low

2.2. Air vents are blocked 2.2. Clean the air vents

2.3. Ambient temperature is 2.3. Run the product for a

cold

while to warm up.

3. Unsatisfac- 3.1. Drill bit is worn tory result 3.2. Drill bit not suitable for intended operation

3.1. Replace with a new one 3.2. Use suitable drill bit

4. Product sud- 4.1. Product overloaded denly stops

4.1. Remove the product from the workpiece and switch it on again

4.2. Battery pack discharged 4.2. Remove and charge battery pack

4.3. Battery too hot

4.3. Remove battery pack and let it cool down

5. Excessive 5.1 Drill bit is dull / damaged 5.1 Replace with a new one
vibration or
noise 30

MNL_18V IMPACT DRIVER_MID18-LI_IMGB_V1_211224.indd 30

2021/12/23 10:31 PM

TTI885IPD

Recycling and disposal EN

Recycling and disposal
Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your Local Authority or local store for recycling advice.
For further information visit www.recycle-more.co.uk. The product comes in a package that protects it against damage during shipping. Keep the package until you are sure that all parts have been delivered and the product is working properly. Recycle the package afterwards.
Disposal of an exhausted battery pack
The battery is Li-Ion type. To preserve natural resources, please recycle or dispose of the battery pack properly. Consult your local waste authority for information regarding available recycling and / or disposal options. Discharge your battery pack by operating your tool, then remove the battery pack from the tool and cover the battery pack connections with heavy duty adhesive tape to prevent short circuit and energy discharge. Do not attempt to open or remove any of the components.

In more detail...

MNL_18V IMPACT DRIVER_MID18-LI_IMGB_V1_211224.indd 31

31
2021/12/23 10:31 PM

EN Guarantee

TTI885IPD

In more detail...

Guarantee
We take special care to select high quality materials and use manufacturing techniques that allow us to create products incorporating design and durability. This product (TITAN Cordless Impact Driver) has a manufacturer's guarantee of 2 years against manufacturing defects, from the date of purchase (if bought in store) or date of delivery (if bought online), at no additional cost.
To make a claim under this guarantee, you must present your proof of purchase (such as a sales receipt, purchase invoice or other evidence admissible under applicable law), please keep your proof of purchase in a safe place. For this guarantee to apply, the product you purchased must be new, it will not apply to second hand or display products. Unless stated otherwise by applicable law, any replacement product issued under this guarantee will only be guaranteed until expiry of the original guarantee period.
This guarantee covers product failures and malfunctions provided the product was used for the purpose for which it is intended and subject to installation, cleaning, care and maintenance in accordance with the information contained in these terms and conditions, in the user manual and standard practice, provided that standard practice does not conflict with the user manual.
This guarantee does not cover defects and damage caused by normal wear and tear or damage that could be the result of improper use, faulty installation or assembly, neglect, accident, misuse, or modification of the product. Unless stated otherwise by applicable law, this guarantee will not cover, in any case, ancillary costs (shipping, movement, costs of uninstalling and reinstalling, labour etc), or direct and indirect damage.
This guarantee does not cover defects and damage caused by or resulting from: Normal wear and tear Overload, misuse or neglect Repairs attempted by anyone other than an authorised agent Cosmetic damage Damage caused by foreign objects, substances or accidents Accidental damage or modification Failure to follow manufacturer's guidelines Loss of use of the goods
If the product is defective, we will, within a reasonable time, repair or replace it.
Rights under this guarantee are enforceable in the country in which you purchased this product. Guarantee related queries should be addressed to the store you purchased this product from. The guarantee is in addition to and does not affect your statutory rights.

32
MNL_18V IMPACT DRIVER_MID18-LI_IMGB_V1_211224.indd 32

2021/12/23 10:31 PM

TTI885IPD

Declaration of conformity EN

In more detail...

(UK) DECLARATION OF CONFORMITY

Product
· Cordless Impact Driver · TTI885IPD · Serial number: from 000001 to 999999
Name and address of the manufacturer or his authorised representative:

Kingfisher International Products Limited 3 Sheldon Square London W2 6PX United Kingdom

This declaration of conformity is issued under the sole responsibility of the manufacturer.

Object of the declaration

Product

Model

EAN

Cordless Impact Driver

TTI885IPD

The object of the declaration described above is in conformity with the relevant legislation:
Supply of Machinery (Safety) Regulations 2008 as amended Electromagnetic Compatibility Regulations 2016 as amended The Restriction of the use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012 as amended
References to the relevant designated standards used or references to the other technical specifications in relation to which conformity is declared:
BS EN 62841-1:2015 BS EN 62841-2-2:2014 BS EN 55014-1:2017+A11 BS EN 55014-2:1997+A2 BS EN 55014-2:2015
Authorised signatory and technical file holder: Kingfisher International Products Limited 3 Sheldon Square London W2 6PX United Kingdom

David Awe Group Quality Director
MNL_18V IMPACT DRIVER_MID18-LI_IMGB_V1_211224.indd 33

On: 28/02/2022

33
2021/12/23 10:31 PM

In more detail...

EN Declaration of conformity

TTI885IPD

(EN) EU DECLARATION OF CONFORMITY (FR) DÉCLARATION UE DE CONFORMITÉ (ES) DECLARACIÓN UE DE CONFORMIDAD (PT) DECLARAÇÃO DE CONFORMIDADE UE

Product/ Produit/ Producto/Produto
· Cordless Impact Driver/Visseuse à choc sans fil/Atornillador de impacto inalámbrico Berbequim de impacto sem fios
· TTI885IPD · SN: 000001-999999
Name and address of the manufacturer or his authorised representative: Nom et adresse du fabricant ou de son mandataire: Nombre y dirección del fabricante o de su representante autorizado: Nome e endereço do fabricante ou do respetivo mandatário:
Kingfisher International Products B.V., Rapenburgerstraat 175E, 1011 VM Amsterdam, The Netherlands

This declaration of conformity is issued under the sole responsibility of the manufacturer. La présente déclaration de conformité est établie sous la seule responsabilité du fabricant. La presente declaración de conformidad se expide bajo la exclusiva responsabilidad del fabricante. A presente declaração de conformidade é emitida sob a exclusiva responsabilidade do fabricante.

Object of the declaration/Objet de la declaration/Objeto de la declaración/Objeto da declaração

Product/Produit/Producto/ Produto

Model/Modèle/Modelo/Modelo

EAN

Cordless Impact Driver Visseuse à choc sans fil Atornillador de impacto inalámbrico Berbequim de impacto sem fios

TTI885IPD

The object of the declaration described above is in conformity with the relevant Union harmonisation legislation: L'objet de la déclaration décrit ci-dessus est conforme à la législation d'harmonisation de l'Union applicable: El objeto de la declaración descrita anteriormente es conforme con la legislación de armonización pertinente de la Unión: O objeto da declaração acima descrito está em conformidade com a legislação de harmonização da União aplicável:

34
MNL_18V IMPACT DRIVER_MID18-LI_IMGB_V1_211224.indd 34

2021/12/23 10:31 PM

In more detail...

TTI885IPD

Declaration of conformity EN

2006/42/EC as amended 2014/30/EU as amended 2011/65/EU as amended electronic equipment

Machinery Directive Directive Electromagnetic compatibility Directive Restriction of the use of certain hazardous substances in electrical and

Directive 2006/42/CE relative aux machines 2014/30 / UE telle que modifiée Directive Compatibilité électromagnétique Directive 2011/65/UE relative à la limitation de l'utilisation de certaines substances dangereuses dans les équipements électriques et électroniques

Directiva sobre maquinaria modificada 2006/42/CE 2014/30/UE modificada Directiva Compatibilidad electromagnética 2011/65/UE modificada Directiva Restricción del uso de determinadas sustancias peligrosas en equipos eléctricos y electrónicos

2006/42/CE como diretiva de máquinas alteradas 2014/30/UE como alteração da compatibilidade eletromagnétic 2011/65/UE como restrição diretiva alterada da utilização de certas substâncias perigosas em equipamentos elétricos e eletrónicos

References to the relevant harmonised standards used or references to the other technical specifications in relation to which conformity is declared: Références des normes harmonisées pertinentes appliquées, y compris la date de celles-ci, ou des autres specifications techniques, y compris la date de celles-ci, par rapport auxquelles la conformité est déclarée: Referencias a las normas armonizadas pertinentes utilizadas, incluidas las fechas de las normas, o referencias a las otras especificaciones técnicas, incluidas las fechas de las especificaciones, respecto a las cuales se declara la conformidad: Referências às normas harmonizadas aplicáveis utilizadas, incluindo a data da norma, ou às outras especificações técnicas, incluindo a data da especificação, em relação às quais é declarada a conformidade:

EN 62841-1:2015 EN 62841-2-2:2014 EN 55014-1:2017+A11 EN 55014-2:2015

Authorised signatory and technical file holder/signataire et responsable de la documentation technique authorisé/firmante autorizado y titular del expediente tecnico/ signatário autorizado e detentor da ficha técnica
Kingfisher International Products B.V., Rapenburgerstraat 175E, 1011 VM Amsterdam,The Netherlands

David Awe Group Quality Director

28/02/2022

MNL_18V IMPACT DRIVER_MID18-LI_IMGB_V1_211224.indd 35

35
2021/12/23 10:31 PM

Manufacturer,Fabricant,Producent,Productor,Fabricante:
UK Manufacturer: Kingfisher International Products Limited
3 Sheldon Square, London, W2 6PX United Kingdom
www.kingfisher.com/products
EU Manufacturer: Kingfisher International Products B.V.
Rapenburgerstraat 175E 1011 VM Amsterdam The Netherlands
www.kingfisher.com/products

www.screwfix.com To view instruction manuals online, visit

www.screwfix.ie

www.kingfisher.com/products

www.bricodepot.fr Pour consulter les manuels d'instructions en ligne, rendez-vous sur le site www.kingfisher.com/products

www.bricodepot.es Para consultar los manuales de instrucciones en línea, visite www.kingfisher.com/products

www.bricodepot.pt Para consultar manuais de instruções online, visite www.kingfisher.com/products

MNL_18V IMPACT DRIVER_MID18-LI_IMGB_V1_211224.indd 36

2021/12/23 10:31 PM