Skizze Pen P0101 User Manual

1. Skizze Pen Driver Downloads

Download the necessary drivers from the following sources:

• Download from Microsoft Store ?
• Download from www.skizze.cn ?

2. Components Overview

Please familiarize yourself with the main components and their functions before use.

Pen Components:

• Motion Sensing Pointer
• PAGE DOWN/PPT EXIT button
• ON/OFF SHORTCUT KEY
• PAGE UP/PPT PLAY button
• ERASER
• NIB (Pen Tip)

[Diagram showing the pen with labels for Motion Sensing Pointer, PAGE DOWN/PPT EXIT, ON/OFF SHORTCUT KEY, PAGE UP/PPT PLAY, ERASER, and NIB.]

3. Using the Super-Power Pen

Follow these steps for successful operation:

1. Installation successful, input user ID, pen tip verification successful, Bluetooth connects automatically, and the pen is enabled.
2. Installation successful, input user ID, pen tip verification successful, confirm to enable the pen.
3. Click the key; the pen tip indicator turns white, and the pen enters the starting state.
4. The pen tip indicator is white, and the pen is connected to the touch device.
5. Writing, PPT demonstration, and the "flying squirrel" function in the air are now ready for use.

[Diagram showing the pen with ON/OFF SHORTCUT label.]

Remarks: Use conditions for the super-energy pen:

• Requires Windows 10 version 1709 or above.
• The touch screen system must support Bluetooth (either built-in or via an external Bluetooth dongle).
• The touch screen must support fine nibs.

4. Windows Ink Writing

Set up the function interface for shortcut key click and double click actions:

[Screenshot description: The Windows settings interface for "Pen & Windows Ink" is shown. Options for "Click once" and "Double click" allow users to assign actions like opening the Windows Ink Workspace, Notes, or Screenshot and Sketch. The interface includes options to allow apps to override shortcut behavior.]

Press and hold the rubber key long enough to erase handwriting.

5. Status of Smart Pen

Operation and status description of the On/Off button:

Notes: Click once to check the pen’s connection status when the power is on.

• Connected: Blink once in white
• Disconnected: Blink thrice in blue

6. Charging

Indicator light status during charging:

• Blink in red: Low Battery
• Red on: Charging
• Green on: Fully Charged

[Diagram showing the pen's USB Type-C port and a USB Type-C cable connecting to it.]

7. Replace Nib

The nib is a consumable item. If the nib wears out during use, please replace it as shown.

[Diagram illustrating the nib replacement process. It shows a checkmark ✔️ for the correct method and a cross mark ❌ for an incorrect method.]

Remark: The package includes two spare nibs. Additional nibs can be purchased from authorized websites.

The smart pen contains precision components. Do not disassemble the pen when replacing the nib.

8. Safety Information

Please read the following safety precautions carefully before using this smart pen:

• Power cord security: When charging, ensure the smart pen is placed in a proper position.
• Do not try to repair: Do not attempt to disassemble, repair, or modify any part of the product to avoid risks. Unauthorized modifications may void your warranty.
• Stay away from children: The smart pen contains small parts. Keep it out of reach of children.
• Cleaning: Use a damp cloth to clean the pen's exterior. Avoid contact between the charging interface and aerosols, solvents, or abrasives.
• Battery: The smart pen contains sensitive electronic components, including batteries, which can be damaged or cause injury if dropped, squeezed, or exposed to liquids. The battery is not user-replaceable; battery replacement must be performed by designated after-sales service personnel.
• Operating environment: Do not use the smart pen in wet, dusty, or magnetically strong environments to prevent malfunctions. Store the pen between -20°C and 45°C. Extreme temperatures may cause equipment malfunction. Avoid placing the pen near heat sources like electric heaters, water heaters, or candles.

2. Name and Content of Harmful Substances in Products

This section details the presence of harmful substances in the product's components.

Explanation of Symbols:

• □: Indicates that the content of the harmful substance in all homogeneous materials of the part is below the limit requirement specified in GB/T 26572.
• ■: Indicates that the content of the harmful substance in at least one of the homogeneous materials of the part exceeds the limit requirement specified in GB/T 26572-2011, but meets the environmental protection requirements of the EU RoHS Directive.

According to Chinese electronic industry standard SJ/T 11364-2014 and related Chinese government regulations, this product and its components may have an environmentally friendly use period mark. The lifespan indicated by this mark may vary depending on the component and manufacturer. The expiration date on the component takes precedence over any conflicting or different UFUP (Use-Until-Failure-Period) labels on the product.

Contact Information

Bridgehub LLC

PO Box 5416, Santa Clara, CA 95056

Phone: 1-650-585-2195

Contact Person: Cindy Wang

Phone: 1-650-585-2340

FCC Warning

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy. If not installed and used in accordance with the instructions, it may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment causes harmful interference to radio or television reception (which can be determined by turning the equipment off and on), the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.