User Manual for VigilLink models including: VLSP-41H21E 48Gbps 4x1 HDMI Switcher, VLSP-41H21E, 48Gbps 4x1 HDMI Switcher, 4x1 HDMI Switcher, HDMI Switcher, Switcher
VLSW-41H21E — VigilLink
48Gbps 4x1 HDMI Switcher VLSP-41H21E VER 1.0 Thank you for purchasing this product For optimum performance and safety, please read these instructions carefully before connecting, operating or adjusting this product. Please keep this manual for future reference. Surge protection device recommended. This product contains sensitive electrical components that may be damaged by electrical spikes, surges, electric shock, lighting strikes, etc. Use of surge protection systems is highly recommended in order to protect and extend the life of your equipment. Table of Contents 1. Introduction ................................................................................................. 3 2. Features ....................................................................................................... 3 3. Package Contents ...................................................................................... 3 4. Specifications .............................................................................................. 4 5. Operation Controls and Functions ............................................................. 5 6. IR Remote .................................................................................................... 6 7. Application Diagram.................................................................................. 7 1. Introduction This 48Gbps 4x1 HDMI Switcher is an ultrathin auto switcher, with four HDMI video inputs and one HDMI output. The video resolutions is up to 8K@60Hz 4:2:0 12bit. It supports HDR 10, HDR 10+, Dolby Vision and multichannel audio format. Built-in EDID DIP switch supports advanced EDID management. Furthermore, the firmware update at USB Type C port is supported. 2. Features HDMI 2.1 and HDCP 2.3 compliant Support 48Gbps FRL and 18Gbps TMDS video bandwidth 8K@60Hz 4:2:0 12bit, 8K@30 4:4:4 12bit, 4K@120Hz 4:4:4 12bit video support Support HDR, HDR10, HDR10+, Dolby Vision, HLG pass-through HDMI 2.1 protocols: VRR, ALLM, QMS, QFT, SBTM are supported Support HDMI audio formats: LPCM 7.1CH, Dolby TrueHD, Atmos and DTS-HD Master Audio 4 x HDMI inputs routed to 1 x HDMI output Control via front panel button and IR remote Support auto input switching and manual input switching Advanced EDID management CEC control from TV at output to source at input 3. Pa cka ge Contents 1 × 48Gbps 4x1 HDMI Switcher 1 × IR Remote 1 × 5V/1A Power Supply 1 × User Manual 3/8 4. Specifica t ions Technical HDMI Compliance HDMI 2.1 HDCP Compliance HDCP 2.3 Video Bandwidth Video Resolution Color Depth 48Gbps FRL and 18Gbps TMDS Up to 8K@60Hz 4:2:0 12bit, 8K@30 4:4:4 12bit, 4K@120Hz 4:4:4 12bit 8/10/12bit Color Space HDMI Audio Formats Connection Input RGB_4:4:4, YCbCr_4:4:4, YCbCr_4:2:2, YCbCr_4:2:0 LPCM, Dolby Digital/Plus/EX, Dolby True HD, Dolby Atmos, DTS, DTS-EX, DTS-96/24, DTS High Res, DTS-HD Master Audio, DSD 4 × HDMI IN [Type A, 19-pin female] Output 1 × HDMI OUT [Type A, 19-pin female] Control Mechanical Housing 1 × SERVICE [USB Type C, Update port] Metal Color Black Dimensions 145mm (W) × 68mm (D) × 18mm (H) Weight Power Supply Power Consumption Operation Temperature Storage Temperature 258g Input: AC 100~240V 50/60Hz, Output: DC 5V/1A (US/EU standards, CE/FCC/UL certified) 3W (Max) 0°C ~ 40°C / 32°F ~ 104°F -20°C ~ 60°C / -4°F ~ 140°F Relative Humidity 20~90% RH (non-condensing) Recommended HDMI Cable Video Resolution 8K60/8K30/4K120 4K60 1080P HDMI Cable Length (HDMI IN / OUT) 2m/6.6ft 5m/16ft 15m/49ft The use of "Premium High Speed HDMI" cable is highly recommended. 4/8 5. Op e r a t io n Controls and Functions Front Panel Rear Panel No. Name Function Description 1 IR Window IR signal receiving window. 2 POWER LED When the device is powered on, the red power LED is on. 3 IN 1/2/3/4 LED When the IN 1/2/3/4 port is selected as the signal source input channel, the corresponding green LED will be on. 4 OUT LED When the displayer is connected, the green LED will be on. 5 AUTO LED When the auto switching mode is enabled, the green LED will be on. Input signals switching button. SWITCH 6 button Short press this button to switch to the next input port. Long press this button for 3 seconds to disable the auto switching mode. Use for EDID setting. 7 EDID DIP switch 111-Copy OUT port sink EDID (as factory default) 110-4K@60Hz 4:4:4, Audio 2ch PCM 101-FRL 12G_8K_HDR, Audio 2ch PCM 100-FRL 12G_8K_HDR, Audio 5.1ch PCM/DTS/DOLBY 5/8 8 SERVICE 9 IN 1/2/3/4 port 10 OUT port 11 DC 5V 011-FRL 12G_8K_HDR, Audio 7.1ch PCM/DTS/DOLBY/HD 010-FRL 10G_8K_HDR, Audio 2ch PCM 001-FRL 10G_8K_HDR, Audio 5.1ch PCM/DTS/DOLBY 000-FRL 10G_8K_HDR, Audio 7.1ch PCM/DTS/DOLBY/HD USB Type C port, used to update MCU firmware. HDMI signal input ports, connected to HDMI source device such as DVD or PS5 with an HDMI cable. HDMI signal output port, connected to HDMI display device such as TV or Monitor with an HDMI cable. DC 5V/1A power input port. 6. IR Re m ot e Auto : Press this button to enable or disable auto switching for input signal sources. 1/2/3/4 : Press 1/2/3/4 button to select the corresponding signal input channel. : Press this button to circularly switch HDMI signal source IN 1/2/3/4 to the OUT port. 6/8 7. Applica t ion Dia gra m The terms HDMI and HDMI High-Definition Multimedia interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. 7/8Adobe PDF Library 24.1.124