Smart Curtain Light Remote and App User Guide
This guide provides comprehensive instructions for operating smart curtain lights using the included remote control and the companion mobile application. It covers setup, features, and advanced functions.
I: Key Instruction (Remote Control)
The remote control offers direct access to various lighting functions.
Remote Control Functions:
- OFF/ON: Powers the device off or on.
- Static color switch: Cycles through static color presets.
- Effect: Selects different dynamic lighting effect modes.
- Brightness+: Increases the brightness level.
- Speed+: Increases the speed of dynamic effects.
- Static Gallery Pause: Pauses the current display in static gallery mode.
- Music Mode 1-3: Switches between three music synchronization modes.
- Timer: 1H/2H/3H: Sets an automatic shut-off timer for 1, 2, or 3 hours.
- Dynamic gallery: Activates a sequence of dynamic patterns.
- Horizontal flip: Flips the displayed pattern horizontally.
- Speed-: Decreases the speed of dynamic effects.
- Static gallery (Move left/right/up/down): Navigates through patterns in the static gallery.
- Static gallery flickers: Applies a flickering animation to static gallery patterns.
Speed Adjustment Notes:
- Speed adjustments affect the rate of change in Effect mode.
- Speed adjustments are applicable in dynamic gallery mode.
- Speed adjustments control navigation speed in static gallery modes (left/right/up/down).
- Sensitivity adjustments impact performance in music mode.
II. About Settings
Within the app's settings interface, users can configure parameters such as color calibration and horizontal flip for the lighting effects.
III. Detailed Introduction of APP Functions
1. Colorful Mode
This mode allows selection from 16 million colors. Users can customize the curtain light color by editing entire sections or individual pixels, and adjust the overall brightness.
The app provides an intuitive color picker, enabling precise selection of hue, saturation, and brightness.
2. Effect Mode
Access 17 pre-programmed lighting effects. Each effect's speed and brightness can be independently adjusted to suit preferences.
3. Font Mode
Create custom text displays or utilize built-in patterns. This mode supports changing text and background colors, and offers various animation effects including scrolling (up/down, around), flickering, and static displays.
4. Gallery Mode
Browse and select from a library of dynamic and static patterns. The curtain lights will then render the chosen pattern with its associated lighting effect.
5. DIY Function
Multi-Screen Animation: Use the '+' icon to create multiple screens, enabling the generation of dynamic, frame-by-frame animations.
Custom Content Creation: The '+' icon also allows for the creation of arbitrary patterns and text. These custom creations can be animated with effects such as scrolling, flickering, or fixed displays, enhancing the ambiance for special occasions.
6. Music Mode
Music Synchronization: The lights dynamically react to music rhythm. Add music tracks from your phone's storage or the app's built-in library to synchronize lighting effects with audio.
Microphone Input: Lighting color changes in sync with music rhythm detected via the phone's microphone or an external microphone (available in specific versions). Microphone sensitivity is adjustable.
7. Light Timer
Schedule automatic on/off times for the smart lights. Users can select a preferred effect and color for scheduled operation and save these settings.
8. Group Control
Manage multiple lighting controllers simultaneously by organizing them into custom groups.
Attentions and Safety Information
- Operate the product only in a dry environment.
- Ensure the input voltage matches the specified DC range as per the manual. Do not connect to a 220V AC power source directly.
- The product requires a common anode connection. Incorrect wiring may lead to malfunction.
FCC Compliance Information
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- The device must not cause harmful interference.
- The device must accept any interference received, including interference that may cause undesired operation.
NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, as per FCC Rules Part 15. These limits are designed to provide reasonable protection against harmful interference in residential installations. The equipment generates, uses, and can radiate radio frequency energy. If not installed and used according to instructions, it may cause harmful interference to radio communications. There is no guarantee that interference will not occur in specific installations. If interference is detected with radio or television reception (verifiable by turning the equipment off and on), users are encouraged to correct it by:
- Reorienting or relocating the receiving antenna.
- Increasing the separation distance between the equipment and the receiver.
- Connecting the equipment to an outlet on a circuit separate from the receiver's circuit.
- Consulting a dealer or an experienced radio/TV technician.
NOTE 2: Any changes or modifications not expressly approved by the party responsible for compliance may void the user's authority to operate the equipment.
RF Exposure Statement
To comply with FCC RF Exposure guidelines, this equipment should be installed and operated with at least 20cm separation between the radiator and your body. This device and its antenna(s) must not be co-located or operated in conjunction with any other antenna or transmitter.
