Lightronics - Complete Lighting and Control SystemsLightronics Lighting Control Product Warranty Information
Instruction Manual for LIGHTRONICS models including: IDW206 DMX Optical Isolator, IDW206, DMX Optical Isolator, Optical Isolator, Isolator
Lightronics Lighting Control - DMX Opto-isolation and Distribution
File Info : application/pdf, 4 Pages, 853.92KB
DocumentDocumentIDW206 DMX Optical Isolator 2 Universe - 6 Outputs Each Version 0.3 06/18/2023 Version 0.2 IDW206 DMX OPTICAL ISOLATOR OWNER'S MANUAL Page 2 of 4 06/16/2023 DESCRIPTION The IDW206 is an optically isolated DMX splitter for two DMX universes. Each universe has six independent DMX output circuits. The unit is supplied in a wall mount metal box with appropriate mounting holes. Knockouts are provided for power and signal access. The IDW206 is intended for INDOOR USE ONLY. Each DMX input is overcurrent and overvoltage protected in each of the three DMX lines (Data-, Data+, and Common). Each of the twelve DMX output circuits also have overcurrent and overvoltage protection in each of the three DMX lines (Data-, Data+, and Common). DMX IN and DMX OUT connections are push on connectors with screw down terminals. The unit's dimensions are 15"W x 15"H x 3.25"D. The unit weight is 9 lbs. IDW206 FACE VIEW (Cover www.lightronics.com Lightronics Inc. 509 Central Drive, Virginia Beach, VA 23454 757 486 3588 Version 0.2 IDW206 DMX OPTICAL ISOLATOR OWNER'S MANUAL IDW206 INTERNAL CIRCUIT BOARD Page 3 of 4 06/16/2023 INSTALLATION SIGNAL CONNECTIONS WARNING RISK OF ELECTRIC SHOCK WARNING RISK OF FIRE REMOVE ALL POWER FROM THE UNIT BEFORE MAKING OR CHANGING ANY CONNECTIONS POWER SUPPLY The IDW206 operates from 120 VAC, 60Hz power and has a 1/4 Amp fuse. Power should be connected to the 3 pole terminal strip as shown in the diagram IDW206 FACE VIEW. All DMX input and output connections are made directly on the circuit board. Six push on connectors with screw down terminals are provided for the DMX outputs. There are two DMX output signals on each connector, one for each universe. Each DMX output signal consists of 3 connector terminals (COM, D-, D+). The diagram IDW206 INTERNAL CIRCUIT BOARD above shows all signal connections. OPERATION Operation is automatic when power is applied, and a DMX input signal is connected. The circuit board contains a RED LED indicator which is on when power is applied. www.lightronics.com Lightronics Inc. A GREEN LED indicator for each universe is on when its DMX input signal is present. 509 Central Drive, Virginia Beach, VA 23454 757 486 3588 Version 0.2 IDW206 DMX OPTICAL ISOLATOR OWNER'S MANUAL Page 4 of 4 06/16/2023 MAINTENANCE OTHER USER MAINTENANCE FUSE REPLACEMENT WARNING RISK OF ELECTRIC SHOCK WARNING RISK OF FIRE REMOVE ALL POWER FROM THE UNIT BEFORE HANDLING OR REPLACING THE FUSE The fuse is shown in the IDW206 FACE VIEW diagram. Replace the fuse ONLY with a 1/4 Amp, 250V, Fast Acting Fuse. The fuse is 1 1/4" long and 1/4" diameter. There are no other user serviceable parts in the unit. Internal service on the unit by other than Lightronics authorized agents will void the warranty. Dealer and Lightronics factory personnel can help you with operation or maintenance problems. Please read the applicable parts of this manual before calling for assistance. If service is required - contact the dealer from whom you purchased the unit or contact Lightronics, Service Department, 509 Central Drive, Virginia Beach, VA 23454 WARRANTY INFORMATION AND REGISTRATION CLICK LINK BELOW www.lightronics.com/warranty.html www.lightronics.com Lightronics Inc. 509 Central Drive, Virginia Beach, VA 23454 757 486 3588