Ninja FS301UK Slushie Maker Instructions

Important Safety Instructions

Read all instructions before use. For household use only.

General Safety Precautions:

• Danger: Indicates a hazard that could cause death or serious injury if not followed.
• Warning: Indicates a hazard that could cause personal injury, fire, electric shock, or damage to property if warnings are ignored.
• Combustible Material: May explode if heated.
• Flammable Material: Flammable symbol on a white background in a red diamond.
• For indoor household use only.
• Always follow basic safety precautions when using electrical appliances.
• PERIL: Risk of fire or explosion due to flammable refrigerant. Do not puncture refrigerant lines. Dispose of properly according to local regulations for flammable refrigerants.
• WARNING: To reduce the risk of injury, fire, electric shock, or property damage, follow these numbered safety precautions and instructions.
• Do not use the appliance for anything other than its intended purpose.
• Read all instructions before using the appliance and its accessories.
• Pay close attention to and follow all warnings and instructions. This appliance contains electrical connections and moving parts that may pose a risk to the user.
• Cleaning and maintenance should not be performed by children without supervision.
• Inventory all contents to ensure all parts are present for correct and safe operation.
• Turn off the appliance and unplug it when not in use, before assembling or disassembling parts, and before cleaning. To unplug, grasp the plug and pull from the outlet. Do not pull the cord.
• Wash all food-contact parts before use according to washing instructions.
• Do not operate any appliance with a damaged cord or plug, or after the appliance malfunctions or has been dropped or damaged in any way. Contact SharkNinja for service.
• This appliance has important markings on the plug. The power cord cannot be replaced. Contact SharkNinja for service if damaged.
• Extension cords are not recommended for use with this appliance.
• Do not immerse the appliance or allow the power cord to come into contact with any liquid.
• Do not let the cord hang over tables or countertops where it can be caught and pull the appliance down.
• Do not allow the cord or appliance to contact hot surfaces, including stoves and other heating appliances.
• Always use the appliance on a dry, level surface.
• Do not allow children to use this appliance or play with it. Close supervision is necessary when used near children.
• This appliance can be used by children aged 8 and up and by persons with reduced physical, sensory, or mental capabilities or lack of experience and knowledge if supervised or instructed on safe use and understand the risks involved.
• Use ONLY attachments and accessories supplied with or recommended by SharkNinja.
• Keep hands, hair, and clothing away from the container during loading and use.
• Avoid contact with moving parts during operation and handling.
• Do not microwave any container or accessory supplied with the appliance.
• Ensure ventilation openings in the appliance housing or built-in structure are not obstructed.
• Do not use mechanical devices or other means to accelerate the defrosting process recommended by the manufacturer.
• Do not damage the refrigerant circuit.
• Do not use electrical appliances in the food storage compartments of the appliance unless they are of the type recommended by the manufacturer.
• Do not add frozen fruit, frozen vegetables, or ice to the appliance.
• Do not add hot ingredients to the appliance.
• Do not immerse the motor base or control panel in water or other liquids.
• Do not fill the jar beyond the MAX FILL line.
• Do not leave the appliance unattended during use.
• Ensure all utensils are removed from containers before use.
• Do not carry the appliance by the carrying handle. Hold the appliance by gripping both sides below the motor base.
• Do not process hard, whole ingredients or ice. This appliance is not intended for processing whole frozen fruit, ice blocks, or ice cubes.
• The appliance must ALWAYS be in an upright position.
• After removing the appliance from packaging, place it upright for at least four hours before use to allow refrigerant oils to settle.
• The appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities or lack of experience and knowledge, unless supervised or instructed by a person responsible for their safety. Children should be supervised to ensure they do not play with the appliance.
• The power cord cannot be replaced. If the cord is damaged, the appliance must be disposed of.
• Keep the back and sides of the appliance open to allow the compressor to function correctly and prevent overheating.
• The back and sides of the appliance should be 10 cm away from the wall.
• Ensure ventilation openings are not obstructed.
• Do not use mechanical devices or other means to accelerate the defrosting process recommended by the manufacturer.
• Do not damage the refrigerant circuit.
• When positioning the appliance, ensure the power cord is not pinched or damaged.
• Do not place multiple portable outlets or portable power sources behind the appliance.

Components

A: Easy Fill Opening and Lid

B: Jar*

C: Handle

D: Spout with removable splash guard

E: Condensation collector

F: 2-piece drip tray

G: Power switch

H: Carrying handle

I: Spiral

J: Evaporator (attached to motor base)

K: Motor base

L: Control panel

M: Drip tray storage compartment (left side of motor base)

*Minimum liquid capacity 475 ml. Maximum liquid capacity 1890 ml.

Before First Use

1. Ensure all components are cleaned and the motor base is on a flat, stable surface.

2. Install the condensation collector by sliding it into the track grooves.

3. Install the spiral by sliding it over the evaporator and twisting until it locks into place.

4. Lift the carrying handle and slide the jar over the installed spiral and evaporator.

5. Secure the jar by pushing the carrying handle back to lock it.

6. Insert the drip tray into the front of the motor base until it clicks into place.

NOTE: The appliance must stand upright on the countertop for at least 2 hours before first use to allow the refrigerant to settle.

7. Plug in the appliance. Press the power switch on the back of the motor base.

8. Open the lid on top of the jar.

9. Add liquid(s) and/or mixed ingredients through the easy fill opening and close the lid.

10. Press the power button to start the appliance.

11. Select the desired preset program.

12. The appliance will sound an alert when the optimal temperature is reached. It will maintain the drink at this temperature for up to 12 hours.

NOTE: Temperature adjustment LEDs blink while the frozen drink cools. They remain solid when the desired temperature is reached, followed by an audible alert. The appliance continues to operate to keep the drink frozen and ready to serve.

Preparation can take 15-60 minutes depending on ingredients, volume, and initial temperature.

Pre-frozen ingredients are sweeter. Don't worry, the taste won't be as sweet after freezing.

Using the Control Panel

POWER BUTTON: Press to turn the appliance on or off.

RINSE CYCLE: Agitates without chilling to rinse the appliance. After use, wash components by hand or in the dishwasher.

PRESET PROGRAMS: 5 unique preset programs use RapidChill technology for ideal frozen beverage texture.

TEMPERATURE ADJUSTMENT: Each preset program starts at an optimal temperature. Adjust temperature for your perfect frozen texture.

• For drinkable frozen beverages, decrease temperature by pressing the down arrow.
• For thicker, colder frozen beverages, increase temperature by pressing the up arrow.

TROUBLESHOOTING:

• COOLING ACTION NOT WORKING? If desired texture is not achieved after 60 minutes, move to the next temperature level. Test texture after 10-15 minutes. Repeat if necessary.
• GRANITA NOT FLOWING? For optimal flow, fill to the MAX FILL line and ensure the appliance is running. For smoother flow, decrease temperature. Easier-to-drink frozen beverages flow more smoothly.

PRESET PROGRAMS:

SUGAR CONTENT REQUIREMENTS:

Too much or too little sugar or alcohol will prevent proper freezing. Follow instructions for a perfect frozen beverage.

All ingredients must contain at least 5g of sugar per 100ml.

SUGAR CONTENT GUIDELINES:

Check the nutritional label of your drink/liquid to ensure it meets minimum sugar content recommendations.

EXAMPLE:

DIET AND LOW-SUGAR DRINKS:

Diet and low-sugar drinks cannot be turned into slushies on their own due to insufficient sugar for proper freezing. To make them into slushies, add the following:

WHAT IS ERYTHRITOL?

Erythritol is a low-calorie sweetener that provides a sugar-like taste without significantly affecting blood sugar levels or contributing to tooth decay. It is widely used as a sugar substitute and is generally considered safe for consumption. Consume in moderation as part of a balanced diet.

TROUBLESHOOTING:

• LOW SUGAR CONTENT ALERT: If the sugar content is too low, the appliance will detect it and alert you. Temperature adjustment LEDs will blink sequentially from top to bottom, and the appliance will beep every minute for 15 minutes.
• IF A DRINK DOES NOT MEET MINIMUM SUGAR REQUIREMENTS: Add 1-2 tablespoons of flavored syrup, sugar, date sugar, coconut sugar, maple syrup, agave syrup, simple syrup, or honey per serving. Combine the extra sugar with the base before pouring into the appliance. Reset the appliance by pressing the corresponding preset program button, then restart by pressing the same button again.

ALCOHOL GUIDELINES

For perfect frozen cocktails, ensure all pre-mixed ingredients (wine, beer, etc.) contain between 2.8% and 16% alcohol when using the FROZEN COCKTAIL preset.

HIGH ALCOHOL/SPIRITS GUIDELINES:

For frozen cocktails, consult the table below for maximum alcohol content of spirits (vodka, tequila, etc.) in the total drink volume.

The table above is a guide for incorporating spirits (over 40% ABV) only. For other alcoholic beverages like wine, beer, spritzers, or pre-mixed cocktails, consult the Inspiration Guide.

TROUBLESHOOTING:

• HIGH ALCOHOL/SUGAR CONTENT ALERT: If the alcohol content is too high, the appliance will detect it and alert you. Temperature adjustment LEDs will blink sequentially from bottom to top, and the appliance will beep every minute for 15 minutes.
• IF MAXIMUM ALCOHOL CONTENT IS EXCEEDED: Add 60 ml of juice, water, non-alcoholic drink mix, soda, tonic water, sparkling water, or coffee/tea per serving to dilute the ingredients. Reset the appliance by pressing the corresponding preset program button, then restart by pressing the same button again.

RECOMMENDATIONS AND TIPS:

• Allow the appliance to stand upright for at least 2 hours before first use.
• Do not add hot ingredients.
• Do not add ice or solid ingredients like fruit, ice cream, or frozen fruit.
• All ingredients must contain at least 5g of sugar per 100ml.
• When using the Frozen Cocktail preset, all pre-mixed ingredients must contain between 2.8% and 16% alcohol.
• For best results, chill liquids or mixed ingredients before adding them to the appliance.
• For a perfectly frozen drink, chill glasses before pouring.
• Use the temperature adjustment buttons for ideal frozen beverage texture.
• When using the Milkshake or Frappé preset, pour the contents into containers within 30 minutes of program completion to avoid foam formation.
• For optimal flow, fill the appliance to the maximum fill line (1890 ml).
• The appliance can operate for up to 12 hours.
• All components except the motor base and evaporator are dishwasher safe, but should NOT go through a drying cycle.
• Minimum ingredient quantity: 475 ml. Maximum ingredient quantity: 1890 ml.
• This appliance is NOT a blender.
• Do not process large pieces of ice or ice cubes.
• Do not make smoothies or process hard, whole ingredients.
• Do not attempt to mix or macerate non-liquid ingredients.

Using the Appliance - Continued

13. Place a glass on the drip tray under the handle.

14. To serve, slowly pull the handle. Release the handle to stop.

15. Enjoy your frozen beverage.

16. The appliance can operate for up to 12 hours.

NOTE: Do not deactivate the preset program before serving all the frozen beverage.

Care and Maintenance

USING THE RINSE CYCLE:

NOTE: Rinse liquids will drain quickly from the spout. Use a cup or large bowl to collect this liquid.

This cycle agitates without chilling to rinse the appliance. After using the rinse cycle, wash all components by hand or in the dishwasher for a complete cleaning after each use.

1. Empty the frozen beverage completely.
2. Turn off the current preset program. Press the RINSE button.
3. Add hot water up to the jar's maximum fill line (1890 ml).
4. Let the water drain slowly from the appliance immediately after filling.
5. Turn off the rinse cycle by pressing the RINSE button again.
6. Press the power button to turn off the appliance.

NOTE: If necessary, repeat until all frozen beverage is removed from the evaporator.

DISASSEMBLY AND CLEANING:

For best results, use the rinse cycle before disassembling and cleaning all components.

1. Unlock the carrying handle by pulling it forward and remove the jar by gently pulling it away from the appliance. For more thorough cleaning, the splash guard can be removed from the jar by pulling forward. Ensure the jar is tilted down to prevent any remaining liquid from spilling. Set aside.
2. Remove the spiral from the evaporator. Set aside.
3. Wipe the evaporator with a sanitized cloth or a warm, damp cloth.
4. Gently slide the condensation collector out of the appliance as it may contain residual liquid. Set aside.
5. Wipe the appliance base with a sanitized cloth or a warm, damp cloth.
6. NOTE: The drip tray cover can be removed for easy cleaning. Regularly clean food-contact surfaces.
7. If necessary, remove the drip tray and/or spout splash guard.
8. Wash all components by hand with warm, soapy water or in the dishwasher. Repeat if necessary until all components are completely clean.
9. NOTE: All components except the motor base and evaporator are dishwasher safe. Cleaning and maintenance should not be performed by children without supervision.
10. Wipe the motor base and evaporator with a sanitized cloth or a warm, damp cloth.
11. Allow all components to dry completely before reassembling and/or storing the appliance.

STORAGE

To store the cord, wrap it with a hook-and-loop fastener near the back of the motor base. Do NOT wrap the cord around the bottom of the base.

Store the appliance upright with all components assembled. Store the drip tray on the left side of the appliance, securing it in place. When moving the appliance, lift it by the bottom of the motor base.

Do not store ingredients inside the jar.

MOTOR RESET

This appliance has a unique safety system to prevent damage to the motor and drive system if accidentally overloaded. If overloaded, the motor will temporarily shut off. Follow the reset procedure below:

1. Unplug the appliance.
2. Let the appliance cool for approximately 15 minutes.
3. Remove all components and accessories. Ensure the spiral is not blocked by ingredients.
4. IMPORTANT: Ensure maximum capacity has not been exceeded, as this is the most common cause of appliance overload.
5. Do not process large pieces of ice or ice cubes. Do not make smoothies or process hard, whole ingredients.

ORDERING REPLACEMENT PARTS

To order replacement parts and accessories, visit ninja.ro.

TROUBLESHOOTING

WARNING: To reduce the risk of shock and accidental starting, turn off power and unplug the appliance before troubleshooting.

Appliance is difficult to remove from countertop for storage: Place hands under both sides of the motor base and gently pull the appliance upward.

Can I add frozen fruit or ice? No. Do not add frozen ingredients or ice when using this appliance.

Alert when jar is not installed: If the jar is not installed correctly, the appliance will detect this and alert you. All preset program LEDs will blink.

• Lift the carrying handle and slide the jar over the installed spiral and evaporator.
• Secure the jar by pushing the carrying handle back to lock it.
• Press the power button to start the appliance; the preset program LEDs will illuminate, indicating the appliance is ready for use.

Low Sugar Content Alert: If the sugar content of the ingredients is too low, the appliance will detect this and alert you. Temperature adjustment LEDs will blink sequentially from top to bottom, and the appliance will beep every minute for 15 minutes.

• Check the sugar content of ingredients to ensure it is not less than 5%.
• If using a pre-made beverage, check the ingredient list for at least 5% sugar content and ensure it contains no artificial sweeteners. Refer to the Sugar Content Requirements section.
• If a drink does not meet minimum sugar requirements, add 1-2 tablespoons of flavored syrup, juice, sugar, date sugar, coconut sugar, maple syrup, agave syrup, simple syrup, or honey per serving. Reset the appliance by pressing the corresponding preset program button, then restart by pressing the same button again to resume frozen beverage preparation.

High Alcohol Content Alert: If the alcohol content of the ingredients is too high, the appliance will detect this and alert you. Temperature adjustment LEDs will blink sequentially from bottom to top, and the appliance will beep every minute for 15 minutes.

• Check the alcohol content of ingredients to ensure it is between 2.8% and 16%.
• If using high-proof alcohol/spirits (40%), use 120 ml for every 710 ml of total prepared volume. Refer to the Alcohol Guidelines section for more details.
• If maximum alcohol content is exceeded, add 60 ml of juice, water, non-alcoholic drink mix, soda, tonic water, sparkling water, or coffee/tea per serving to dilute the content. Reset the appliance by pressing the corresponding preset program button, then restart by pressing the same button again to resume frozen beverage preparation.

Motor Jam Alert: If the motor stops during operation, the appliance will detect this and alert you. Each temperature adjustment LED will blink, and the appliance will beep every minute for 15 minutes.

• This appliance has a unique safety system to prevent damage to the motor and drive system if accidentally overloaded. If overloaded, the motor will temporarily shut off.
• Unplug the appliance.
• Let the appliance cool for approximately 15 minutes.
• Remove all components and accessories. Ensure the spiral is not blocked by ingredients.
• Plug the appliance back in and reassemble all components to resume use.

Appliance Malfunction Alert: If the appliance malfunctions, it will detect this and alert you. Every second temperature adjustment LED will blink alternately, and the appliance will beep every minute for 15 minutes.

• If the appliance malfunctions, contact customer service at 0800 862 0453.

Appliance Not Starting Alert: Preset program LEDs will blink sequentially; this occurs if the appliance's power is turned on from the rear switch without the front power/on button being pressed.

• Press the front power/on button to stop the blinking LEDs and start the appliance.

Appliance Tipped Over Alert: If the appliance is tipped over during use, it will detect this and alert you. The 5 top and 5 bottom temperature adjustment LEDs will blink alternately, and the appliance will beep every minute for 15 minutes.

• Place the appliance upright and let it stand for at least 2 hours before use.

Manufacturer's Warranty

When a consumer buys a product in Europe, they benefit from legal rights regarding product quality (your legal rights). You can exercise your legal rights against the retailer, including Ninja, if you purchased your Ninja kitchen appliance from the ninja.ro website. Ninja has great confidence in the quality of its products and offers the owner a free additional manufacturer's warranty for parts and labor for up to 2 years.

The provided warranty is an important consideration – and reflects the manufacturer's level of confidence in the quality of the product and production. The manufacturer's warranty does not affect your legal rights.

How long are Ninja appliances covered by warranty?

The manufacturer's warranty is provided for one year from the date of purchase as standard.

What does Ninja's free warranty cover?

Repair or replacement (at Ninja's discretion) of your Ninja appliance, including all parts and labor.

What does Ninja's free warranty NOT cover?

• Normal wear and tear.
• Accidental damage or defects caused by negligent use or care, misuse, neglect, improper use or handling of the Ninja kitchen appliance without adhering to the Ninja user manual provided with the appliance.
• Damage caused by using the Ninja kitchen appliance for purposes other than normal household use.
• Damage caused by using parts that are not assembled or installed in accordance with the operating instructions.
• Damage caused by using parts and accessories that are not original Ninja components.
• Faulty installation (unless carried out by Ninja).
• Repairs or modifications not carried out by Ninja or its agents.

How do I make a claim under Ninja's free warranty?

Visit the 'Contact Us' section of our website. You can get online assistance by visiting www.ninja.ro. A Ninja representative will recommend some troubleshooting steps, and if we determine that the item has failed, we will send you a replacement part or a return label to send the defective item back to us free of charge. Please remember that the item will need to be packaged when you return it to us. It can be packaged in any suitable box; it does not need to be sent in its original packaging.

Where can I buy original Ninja spare parts and accessories?

Ninja spare parts and accessories are developed by the same engineers who developed your Ninja appliance. A full range of Ninja spare parts, replacement parts, and accessories for all Ninja appliances is available at ninja.ro. Please note that damage caused by using third-party spare parts may not be covered by the warranty.

Technical Specifications

Voltage: 220-240 V~, 50 Hz

Power: 200 Watts

Standby Power Consumption: 0.7 W

SharkNinja Europe Ltd, 1st/2nd Floor Building 3150, Thorpe Park, Century Way, Leeds, Anglia, LS15 8ZB

+44 (0)800 862 0453

www.ninja.ro

SharkNinja Germania GmbH, Rotfeder-Ring 9, 60327 Frankfurt am Main, Germania

www.ninjakitchen.eu

Illustrations may differ from the actual product. Efforts are continuously made to improve products, so specifications in this manual may change without prior notice.

NINJA is a registered trademark in the UK owned by SharkNinja Operating LLC.

© 2024 SharkNinja Operating LLC

FS301UK_IB_MP_Mv1_250317

Follow us on social media: [Facebook icon] [Instagram icon] [YouTube icon]

@ninjakitchenuk