User Manual for Remote Control QB077-24TX-05

1. Operation Instructions

Power on/off ?: Click to turn the product on or off. Turn off the product to enter standby mode.

Light on/off ?: (Functionality implied by label)

Comfort heating mode ☀️: Mode range from 50 to 86°F (10-30°C), the default value is 86°F (30°C).

ECO heating mode ?: Mode range from 50 to 86°F (10-30°C), the default value is 77°F (25°C).

Boost heating mode ?: Will reset the timer and power settings and will disregard the temperature settings. It will heat at full power of 1500W for 3 hours and will automatically switch to comfort mode after expiration.

Child lock button ?: (Functionality implied by label)

Power level setting ⚡: Adjust power level 750W or 1500W.

Timer button ⏱️: Select the countdown time to turn off (0-24 hour), 0H cancel turn off.

Increase Temperature [+]: Click to increase the temperature set point.

Decrease Temperature [-]: Click to decrease the temperature set point.

2. User Precautions

The remote control uses 2 pcs of 1.5V AAA batteries. Please install the batteries correctly.

When the transmitter's key is pressed, if the LED indicator does not turn on, please inspect the battery installation.

Please pull out the batteries from the transmitter when leaving it unused for a long time.

3. FCC Statement

Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

4. IC Statement

This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's license-exempt RSS(s). Operation is subject to the following two conditions:

This device may not cause interference.
This device must accept any interference, including interference that may cause undesired operation of the device.