GEFU TEMPERE Digital Roast Thermometer with Timer

Technical Data

• Display shows core temperature and timer.
• Pictures facilitate selection of types of meat and their pre-set core temperatures.
• Temperature display up to 250°C / 482°F.
• Choice of temperature display in either °C or °F degrees.
• Timer with alarm function max. 99 hours and 59 minutes.
• Magnet on the back for affixing to metal surfaces (refrigerator, oven).
• Stand on the back of the device.
• Includes AAA battery.

First-Time Use

1. Take all components out of the packaging.
2. The sensitive probe tip is protected by a cap. Always remove this cap before using the probe and put it on again after using and cleaning the probe.
3. Before using the probe, clean it with a damp cloth. Please also follow the relevant instructions in the Cleaning section.
4. There is a protective film on the display, which must be removed before using your digital roasting thermometer for the first time.
5. There is a protective film on the battery in your digital roasting thermometer which must be removed before using it for the first time. Please also follow the instructions in the Changing batteries section.

Using the Thermometer

To turn on the thermometer, push the control on the left (on the back of the device) in the direction of the thermometer symbol ?️.

To turn off the thermometer, push the control on the left (on the back of the device) in the direction of the `О` symbol.

Your digital roasting thermometer can display the temperature in Celsius °C or Fahrenheit °F. To set the preferred temperature scale, push the control on the right (on the back of the device) in the direction of the desired °C or °F scale.

Insert the probe connector into the socket on the side edge of the digital roasting thermometer.

Insert the tip of the probe into the centre of the item to be measured so that the exact core temperature can be determined.PLEASE NOTE: Ensure the probe tip does not jut out of the item being measured or come into contact with an open flame, as this could distort the measurement.

When the signal sounds, stop it by pressing the `MEM/S/S` button.

Pre-set Selection of Meat and Core Temperatures

Press the `MEM/S/S` button to call up the types of meat and their pre-set core temperatures. Use the `▲/HR` and `▼/MIN` buttons to choose between chicken, "rare" roast beef / fish, raw ham, "medium" roast beef, roast pork, and "well-done" roast beef. The selected meat type will flash.

The current core temperature is shown on the left in the display. The pre-set core temperature appears on the right.

A signal sounds as soon as the meat reaches the pre-set core temperature.PLEASE NOTE: The probe gets very hot. Never pull it out with bare hands; always use an oven glove or pot holder.

Manual Setting of Core Temperature

Press the `MEM/S/S` button to switch between pre-set meat types and manual core temperature.

Use the `▲/HR` and `▼/MIN` buttons to increase or decrease the desired core temperature on the right in the display.

A signal sounds as soon as the item to be measured reaches the desired core temperature.PLEASE NOTE: The probe gets very hot. Never pull it out with bare hands; always use an oven glove or pot holder.

Using the Timer

Push the control on the left (on the back of the device) in the direction of the timer symbol ⏱️. The display will show hours (HR) and minutes (MIN).

Cleaning

The digital roasting thermometer with timer is not dishwasher-safe and must not be immersed in water.

The thermometer and the probe can be wiped with a damp cloth.PLEASE NOTE: After use, the probe may be hot. To avoid burns, allow it to cool down before cleaning.

Battery Replacement

1. Push open the lid on the battery compartment on the back of the device and take out the battery. Please also follow the instructions in the Disposal of Used Batteries section.
2. Insert a new (AAA) battery into the battery compartment.
3. Push the battery compartment lid closed again.

Safety Instructions

• Never use the display in a closed oven, grill, or microwave.
• Do not use the device in an environment where the temperature exceeds the device’s maximum operating temperature.
• The probe may only be exposed to temperatures up to a maximum of 250 °C (482 °F). Temperatures above 250 °C (482 °F) risk damage.
• The battery should be replaced as soon as the LCD display becomes weak. Please follow the instructions for environmentally compatible disposal of the battery in the Disposal of Used Batteries section.

Disposal of Used Batteries and Device

Used Batteries: Batteries must not be disposed of in household waste. Every consumer is legally obliged to dispose of used batteries properly at designated collection points in battery retail stores. Batteries must be fully discharged.

Device: Never throw the device into normal household waste at the end of its service life. Please consult your local government or waste disposal company for environmentally compatible disposal options.