Installation Guide for S AND B models including: 75-5138, 75-5138D, 75-5138 Cold Air Intake, Cold Air Intake, Air Intake, Intake
Install Instructions for 75-5138/75-5138D – S&B
INSTALL INSTRUCTIONS FOR 75-5138/75-5138D
BEFORE YOU START
VEHILCE FITMENT: 2019-2024, 2.7L Truck/SUV 1500, Chevy/GMC DEVICE NAME: COLD AIR INTAKE
REQUIRED TOOLS
10mm, 13mm, 3/4 Inch Wrench, T15, T20 Torx Bit, Pin Removal Tool or Flat Blade Screwdriver, 5/16" Nut Driver or Flat Blade Screwdriver, Phillips Screwdriver, P5/32" or 4mm Allen Wrench, 1 Pair of Pliers or similar tool.
Note: Approximate Install Time: 1 hour
STOP! IMPORTANT INFORMATION
Warning: Failure to disable the Air Filter Life System will cause a warning light that can only be reset by a GM Dealer. Please ensure you have disabled the system prior to driving the vehicle with your new S&B Intake. Please refer to steps to cover this procedure or watch the video linked here.
This intake kit may not fit with the following aftermarket parts installed: Body Lift or Lowering Kit, Custom Hood.
¼
Acrobat Distiller 24.0 (Windows)