Inverto OneNet™ MESH WiFi Router

Setup Guide

Introduction

Thank you for choosing the Inverto OneNet™ MESH WiFi Router. This guide provides essential steps to get your router up and running quickly.

Compliance Information

This device complies with FCC Part 15 rules and Industry Canada's licence-exempt RSSs. Operation is subject to two conditions: it must not cause harmful interference and must accept any received interference. Modifications not expressly approved by the party responsible for compliance may void the user's authority to operate the equipment.

For operation in the 5150-5250 MHz band, the device is restricted to indoor use to prevent interference with mobile satellite systems.

This equipment has been tested and found to comply with Class B digital device limits, designed to provide reasonable protection against harmful interference in residential installations. If interference occurs, users are encouraged to try correcting it by:

Reorienting or relocating the receiving antenna.
Increasing the separation between the equipment and receiver.
Connecting the equipment to a different circuit outlet than the receiver.
Consulting a dealer or experienced radio/TV technician.

Setup in 3 Steps

Step 1: Connect to Power and WAN Cables

Connect the router to a power source and your modem using the provided cables.

The router features several ports on its rear panel: a Power port for connecting the power adapter, a LAN/WAN port for connecting to your modem or network, and a USB port. A Reset button is also present.

Observe the LED indicator: A red light indicates power is on. The light turns green when the device has an internet connection.

Step 2: Connect to Wi-Fi

Using your mobile device or computer, search for available Wi-Fi networks. Connect to the network named OneNet-XXXX. No password is required for this initial connection.

Note: The specific network name (OneNet-XXXX) can be found on the bottom label of your router.

Step 3: Open Browser or OneNet™ App

To complete the setup, open a web browser and navigate to onenet.inverto.tv.

For Android users, the OneNet™ application can be downloaded from www.inverto.tv/support. iOS users will have the application available soon.

Need Help?

For assistance, please visit the support page at www.inverto.tv/support.

	Inverto Unicable II Multiswitch IDLU-UST111-CUO80-32P Installation Manual Installation manual for the Inverto Unicable II Multiswitch (IDLU-UST111-CUO80-32P), a cascadable switch with Terrestrial input and 8 Unicable II/Legacy + equalized Terrestrial outputs. Covers product installation, configuration, technical specifications, safety, and troubleshooting.
	Inverto Unicable II® Cascading Multiswitch for Satellite and Terrestrial TV Discover the Inverto Unicable II® IDLU-UST112-CUO12-32S, a cascadable multiswitch designed for efficient distribution of satellite and terrestrial TV signals in MDU/IRS installations. Supports Unicable II (dCSS) and Legacy modes, offering up to 16 user bands per port.
	Inverto Unifiber dSCR Optical Receiver IDLF-RXLOO2-WOOOO-OPR User Manual User manual for the Inverto Unifiber dSCR Optical Receiver (IDLF-RXLOO2-WOOOO-OPR), detailing product description, safety instructions, installation, powering, technical specifications, and configuration for satellite and terrestrial signal distribution.
	Inverto Unicable II Multiswitch Installation Manual - ISKY-UST111-CUO80-16P A comprehensive installation guide for the Inverto Unicable II Multiswitch (ISKY-UST111-CUO80-16P). This manual provides detailed instructions on product installation, configuration, technical specifications, safety guidelines, and troubleshooting for satellite and terrestrial signal distribution systems.