Home - Guangdong itc | Audiovisual System Solution
Owner's Manual for itc models including: VA-6000RT Remote Paging Microphone, VA-6000RT, Remote Paging Microphone, Paging Microphone, Microphone
Micro ITC chọn vùng từ xa màn hình cảm ứng: VA-6000RT
File Info : application/pdf, 2 Pages, 614.12KB
DocumentDocumentRemote Paging Microphone VA-6000RT Descriptions VA-6000RT is used for remote operating VA-6000 system, allowing users to remotely control system voice information and zones paging. Support system zones/groups selection, zones monitoring, zones volume adjustment, zones status display. Features * IPS HD full view display, graphical touch operation, what you see is what you get. * System synchronizes the zones/groups name display, simple operation. * The icon partition status display, more images, more content. * It can adjust the volume for each zone and monitor the current playing content of each zone. * The rear panel can be used for external audio source and can be broadcast to any zone. * Standard Ethernet digital transmission can extend the transmission distance through optical fiber. * The priority and emergency voice operating privileges of the VA6000RT can be configured by the system. Specifications Model Screen Size Resolution Visual Angle Touch Screen Type Power Supply Voltage Max Current Max Power Consumption Standby Power Consumption Performance Index Line Input Sensitivity Input Impedance MIC Input Microphone Type MIC Type Sensitivity Impedance Monitor Audio Output Rated Output Output Power Frequency Response THD SNR Monitor Speaker Output Power Impedance Mechanical Data Dimension(Length x Width x Deep) weight Installation Type Color Environment Requirement Working Temperature Storage Temperature Relative Humidity VA-6000RT 7inch 1024 x 600 Full Angle capacitive screen 24V DC, ±20% 0.5A 12W 9W 775mV 10K 415mm Goose Neck MIC Standing in 10mV 250 600mV 10mW (Drive 16-32 earphone) 100Hz~20KHz <1% (Rated Output), 1KHz >70dB 1.5W 4 245 x 71 x 154mm Machine: 1.44KG Power Supply: 0.3KG Desktop Black +5 ~ +40 -20 ~ +70 <95% (without condensation) www.itctech.com.cn info@itc-pa.com.cn Front Panel Connectors 1 Power status indicator Green--Normal power supply 2 All devices and modules work status indicator: (1) Light off--All equipment or modules of the system are working properly (2) Yellow is bright or flashing--Failure of any device or module (Note: Rapid blinking means the device is offline) 3 Emergency voice indicator light (1) Light off--Warning voice and evacuation voice modules are normal (2) Yellow--Warning voice and evacuation voice modules have failure (3) Red--Warning voice or evacuation voice is playing 4 The gooseneck microphone status indicator (1) Light off--The gooseneck microphone is normal (2) Yellow--The gooseneck microphone has failure (3) Green--The gooseneck microphone is playing (4) Green flashing--Being preempted or preemption is not successful 5 Graphical interaction interface (7 inch touch screen, please refer to the user manual) 6 System work mode switch (1) Red flash rapidly--current mode is reset mode, prohibit all manual operation (2) Red slow flashing--current mode is emergency mode (You can press the button manually to enter or automatically trigger auto-entry, the EVAC voice is allowed in this mode, EVAC voice message is forbidden in normal mode) (3) Light off--current mode is normal mode Note: 1. When the indicator is in a flashing state, press to exit the emergency mode. 2. When the indicator is put out, press the button to enter the emergency mode 7 Gooseneck Microphone socket Back Panel Connectors 1 Network main interface 2 Network standby interface 3 Monitor audio output 4 Extend line audio input 5 DC 24V input 6 Power Switch www.itctech.com.cn info@itc-pa.com.cn