Introduction
This guide introduces the COMBO KIT BT09S, a versatile Bluetooth receiver and car charger. It enables users to stream music and take calls not only through their car radio but also via home speakers. The device features a unique structure for easy connection to any USB charging port, initiating automatic charging. A full charge of 2 hours provides up to 7 hours of music playback or 5.5 hours of talk time. For optimal experience, please read these instructions carefully.
Packing Contents
- Bluetooth Receiver
- User Guide
- Charging Cable
Features
- Advanced Bluetooth technology V5.3
- Wireless audio streaming for home speakers or car stereo systems
- Dual USB output ports with QC3.0+5V/2.4A (total 30W) and Type-C input port
- Built-in 300mAh battery
- Built-in LED indicator for status
- Audio receiver head functions as an independent accessory
- Protection against over-current, over-voltage, over-heat, and short circuits
- Quick activation of Siri/Google Assistant
Specifications
- Bluetooth Version: V5.3
- Bluetooth ID: BT09S
- Bluetooth Frequency Range: 2.402~2.480GHz
- Bluetooth Distance: Approximately 8M (open area)
- Battery Capacity: 300mAh 3.7V
- Charging Time: Approximately 2 hours
- Talking Time: Approximately 5.5 hours
- Music Playing Time: Up to 7 hours
- Standby Time: Auto power-off 10 minutes after disconnection
- Size: 98.5*34.4*34.5mm
- Microphone: Ø4.0*1.5mm
- Product Weight: 52.4g
- Material: Aluminum alloy + ABS Housing
Compatibility
This device can be paired as a hands-free kit with any compatible Bluetooth-enabled devices. Each time, it can only connect with one Bluetooth device.
Precautions
Please read all safety instructions carefully before using this product. Improper use may result in damage to the product or attached devices. To ensure proper functionality, avoid using the product in the following conditions: moist or underwater environments, near heaters or high-temperature sources, under direct strong sunlight, or in conditions prone to falling. Do not dismantle the product without authorization, as this may void the warranty.
Operation Instructions
Using the Music Playing Function:
- Plug the Bluetooth receiver's 3.5mm male jack into your vehicle's FM radio or home speaker auxiliary port.
- Press and hold the MFB for 5 seconds until the LED light flashes and prompts "Power on".
- Turn on your Bluetooth-enabled devices, search for the new device named "BT09S", and pair with it.
- Turn on your music to enjoy crystal clear audio.
- Press the MFB once to Play/Pause as needed.
Using the Hands-Free Function:
- Press the MFB once to Answer/Hang off an incoming call.
- Press and hold the MFB for 2 seconds to reject a phone call.
- Press the MFB twice to redial the last phone call.
- During a conversation, press and hold the MFB for 2 seconds to switch the call between the BT09S and your phone.
Charging the Bluetooth Receiver:
- When the battery is low, a prompt will appear, and its status will be displayed on your phone.
- Connect the USB adapter to a charging port to start charging. The device will be fully charged within 2 hours.
Caution: This device cannot work while charging.
Quick Guide
| Function | Operation |
|---|---|
| Power on | Press and hold MFB for 5 seconds until flashing and prompting "Power on". |
| Power off | Press and hold MFB for 5 seconds until prompt "Power off". |
| Play/Pause music | Press MFB once during music playing. |
| Answer call | Press MFB once when there is an incoming call. |
| End call | Press MFB once during a call. |
| Redial call | Press MFB twice while standby. |
| Reject call | Press and hold MFB for 2 seconds when there is an incoming call. |
| Adjust the volume | Press and hold "+" button: increase volume. Press and hold "-" button: decrease volume. |
| Choose music | Press "<" button: Play the previous song. Press ">" button: Play the next song. |
| Switch phone calls between BT09S and Phone | Press MFB and hold for 2 seconds during conversation. |
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment causes harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna; Increase the separation between the equipment and receiver; Connect the equipment into an outlet on a circuit different from that to which the receiver is connected; Consult the dealer or an experienced radio/TV technician for help. To assure continued compliance, any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. (Example: use only shielded interface cables when connecting to computer or peripheral devices). This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
FCC Radiation Exposure Statement:
The equipment complies with FCC Radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.