Overview
The FEP-0631 is an unmanaged switch featuring 4x 10/100M PoE downlink ports and 2x 10/100M uplink ports. The 4x 10/100M ports support PoE+ (IEEE 802.3af/at standard), with a single port PoE power output up to 30W and a maximum whole machine power of 60W. It offers three operating modes: Extend, Default, and VLAN, to suit various complex environments. The switch includes a PoE Auto-check function designed to automatically detect and restart frozen PD equipment, significantly reducing maintenance effort. It provides robust protection with 6KV surge protection and 6KV contact / 8KV air ESD protection. The device supports wall-hanging and desktop installation, making it reliable and durable for applications such as security network video monitoring and general network engineering.
Feature
- 4x 10/100M PoE downlink ports and 2x 10/100M uplink ports.
- Maximum PoE power per port: 30W.
- Maximum PoE power for the whole machine: 60W.
- Provides three modes: Extend, Default, and VLAN for versatile deployment.
- Supports PoE Auto-check function: Automatically detects frozen PD equipment and restarts port output and the PD device, greatly reducing engineering maintenance difficulty.
- Features 6KV surge protection, 6KV contact / 8KV air ESD protection.
Application
This PoE switch is suitable for various network applications, including connecting IP cameras, IP phones, and Access Points (APs) that require Power over Ethernet. It can also connect to network video recorders (NVRs) or other network switches.
[IP Camera (PoE)] [IP Phone (PoE)] [AP (PoE)]
[Switch]
[NVR] [Other Switch]
Connections are depicted by lines, with clear distinction between PoE and Non-PoE device connections.
Panel Diagram
Front Panel
Ports: 4x 10/100M PoE Downlink, 2x 10/100M Uplink.
Indicators: Power ⚡, PoE ?, Link/Act ?.
Power Input: 48-57VDC.
Grounding Terminal ?.
⚠️ Attention 1: This product must be well grounded against lightning. Please use a cable better than 20# to connect the grounding terminal and ground.
Back Panel
DIP Switches:
- Mode Selection: Extend, Default, VLAN.
- PoE Auto-Check: On/Off.
⚠️ Attention 2: Extend, Default, VLAN mode: It can be selected by dip switch.
- Extend: Ports 1~4 offer Max. 250m transmission; ports 1~4 are isolated and can only communicate with the uplink ports; this mode restrains network storms and closes flow control.
- Default: Normal switch operation.
- VLAN: Ports 1~4 are isolated and can only communicate with the uplink ports; this mode restrains network storms and closes flow control.
⚠️ Attention 3: PoE Auto-check: The PoE Auto-check function is open/closed by dip switch. The switch always auto-detects ports 1~4 for freezing. If some ports are frozen, the switch will restart them, but other ports are unaffected.
Structure Dimension
Dimensions: 136mm (Length) x 80mm (Width) x 30mm (Height).
Package List
Please check the following items before installation. If any are missing, please contact your local dealer.
| Item | Quantity |
|---|---|
| FEP-0631 | 1 pc |
| Power adaptor+AC cable | 1 set |
| Wall hanger+screw | 1 set |
| User manual/QIG | 1 pc |
Installation
Installation on the Wall
- Use the screws to fix the hanger.
- Drill holes on a strong position of the wall and then drive the rubber plug into the hole.
- Drive these screws into the holes to secure the hanger.
[Wall mounting illustration]
Installation Step (Example: Video Monitoring)
- Please turn off the signal source and the device's power; installation with power on may damage the device.
- Use 4 network cables to connect 4 IP cameras with the product's 1~4 RJ45 ports.
- Use 1 network cable to connect port 5 with an NVR, and another network cable to connect port 6 with another switch.
- Connect the switch with the power adapter.
- Check if the installation is correct and the device is good; make sure all connections are reliable and power up the system.
- Make sure every network device's power supply works normally.
Specifications
| Category | Item | Details |
|---|---|---|
| Power | Power supply | Power adapter |
| Range of voltage | DC48V~57V | |
| Consumption | Self-consumption<5W, PoE output Max. 60W | |
| Ethernet ports parameter | 1~4 PoE ports | 10/100Base-TX, 30W PoE (RJ45, IEEE802.3af/at PSE) |
| 5~6 ports | 10/100Base-TX (RJ45) | |
| PoE Auto-check | If detect PD device frozen, restart the device. | |
| Working mode | Extend: Max. 250m transmission, ports isolated, communicate only with uplink ports, restrain network storm, close flow control. Default: Normal switch. VLAN: Ports isolated, communicate only with uplink ports, restrain network storm, close flow control. | |
| Cable and distance | Use cat5e/6, 100m max. (Extend mode max. 250m) | |
| Switch parameter | Standard | IEEE802.3, IEEE802.3u, IEEE802.3z |
| Switch fabric | 1.2Gbps | |
| Throughput | 0.9Mpps | |
| Buffer | 448K | |
| MAC address table | 1K | |
| Indicator | Power | 1 *red |
| Uplink 5, 6 | On RJ45 yellow and green LEDs indicate Link/Act | |
| Downlink 1~4 | On RJ45 green LEDs indicate Link/Act, yellow LEDs indicate PoE | |
| Protection | Surge | 6KV, standard: IEC61000-4-5 |
| ESD | 6KV: contact / 8KV: air, standard: IEC61000-4-2 | |
| Environment | Working temperature | -10°C~50°C |
| Storage temperature | -40°C~85°C | |
| Humidity | 0~95% (No condensation) | |
| Dimension (L×W×H) | 136mm×80mm×30mm | |
| Structure | Material | Metal |
| Colour | Black | |
| Net-weight | 300g |
