Instruction Manual for SKYWORTH models including: PTB1304B, PTB1304B Simultaneous Screen, Simultaneous Screen, Screen
SKYWORTH OPTICAL-ELECTRONIC CO., LTD. PTB1304B 2BAD6-PTB1304B 2BAD6PTB1304B ptb1304b
Operation Manual Method 1: Use the Type-c interface for screen casting Step 1: Insert the peer into the Type-C interface of the meeting tablet and wait until the pairing succeeds. Step 2: Insert the matching device into the type-C interface of the computer. After the indicator light is steady on, it indicates that the connection is successful. Then press the button to start screen casting. Method 2: Use the USB interface for screen casting Step 1: Insert the simultaneous screen into USB interface of tablet PC for conference and wait for successful pairing. Step 2: Insert the simultaneous screen successfully paired into PC computer. If the computer is connected with the simultaneous screen for the first time, it is required to double-click the "Client.exe or Client.app" application in the USB flash drive, the system will pop up the following interface automatically (if the simultaneous screen is not used for the first time, after waiting for 15 seconds, the system will automatically pop up the following interface): Step 3: after the simultaneous screen is paired with PC, the following interface shall appear. Please click the middle button in the simultaneous screen to achieve display on the same screen. Note: While the simultaneous screen is used for display on the same screen, it is required to guarantee that the hot spot of the conference tablet PC is on. This device complies with Part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference. FCC WARNING This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. To maintain compliance with FCC's RF Exposure guidelines, This equipment should be installed and operated with minimum 20cm distance between the radiator and your body: Use only the supplied antenna.Adobe PDF library 15.00 Adobe Illustrator(R) 24.0