FS Network Switch Web Management Configuration Guide

Introduction

This guide details how to configure web management for FS S3950, S5800, S5850, and S8050 series switches. It is applicable for web management with version numbers V7.4.3.r3 and below.

Key Models Covered

The configuration steps apply to the following switch models:

• S5850-48T4Q
• S5850-48S6Q
• S5850-32S2Q
• S5850-48S2Q4C
• S8050-20Q4C
• S5850-24T16S
• S5850-24T16B
• S5800-48F4SR
• S5800-48T4S
• S5850-24S2Q
• S5850-24S2C
• S5800-8TF12S
• S3950-4T12S

Configuration Overview

The process involves several key steps:

• Connection Equipment: Connecting a PC to the switch using RJ-45 and console cables.
• Software Setup: Downloading and installing necessary software like SecureCRT and Tftpd32.
• Parameter Configuration: Setting up serial port parameters and logging into the switch via CLI.
• Web Image Download: Transferring the web management image file to the switch.
• IP Management: Configuring the switch's management IP address and gateway.
• HTTP Services: Enabling the HTTP server on the switch.
• Web Interface Access: Accessing the web management interface through a browser.

Further Information

For more details and support, please visit the official FS website: www.fs.com