ℹ️ Document Conversion Notice:
This document has been converted from PDF and formatted to fit this screen. Diagrams and images may be available only in the original here.
CLASSIC RADIO CONTROL MODEL CAR INSTRUCTION
1:10 WPL RC - REALISTIC RC CAR
PLEASE READ CAREFULLY BEFORE USE AND KEEP IT SAFELY FOR FUTURE REFERENCE
01 For Safety Precautions
Contains small parts and risk of suffocation. Not suitable for children below 3 years old.
Strictly not for children below 8 years old, to prevent accident. For children above 8 years old, requires supervision from adults at all time. Please keep out of reach from children during charging and storage.
Rotating part poses certain risk. To prevent injury, please do not insert finger, hair, cloth and etc. in the gap between wheel and body.
Follow below recommended practices:
Do not operate on busy roads and areas with children, to prevent accident.
Do not operate on sandy, water puddle or dust areas, to prevent damage.
Do not drive towards pedestrians or animals, to prevent accident.
The model contains sharp objects, please follow the correct operating procedure, especially for safety for your eyes.
Please do not bend, throw, or use excessive force during use, to prevent accident.
If not necessary (i.e., upgrade), do not disassemble the product, to prevent damage.
Do not perform upgrade within 1 hour after use to prevent injury from touching the hot motor.
Do not place the product in water or fire, such as gas stove, cooker & etc., to prevent accident.
02 Package Contains
The package includes the following items:
Remote control x1
7.4V battery x1
USB Charger x1
Instruction Manual x1
Sticker x1
Textual description of diagram: An illustration shows the remote control, a rectangular battery pack labeled '7.4V battery', a USB charging cable, a booklet labeled 'Instruction Manual', and a sheet of stickers.
03 Parts location
Textual description of diagram: The diagram shows a radio-controlled car from the front, side, and rear views, with numbered callouts indicating various parts:
① Grille: The front grille of the car.
② Side Mirror: The side mirrors on both sides of the car.
③ Wiper: The windshield wipers on the front.
④ Front Door Handle: The door handles on the front doors.
⑤ Rear Door Handle: The door handles on the rear doors.
⑥ Rear Reg. Plate: The license plate area at the rear.
⑦ Plastic Trim: Various plastic trim pieces on the car body.
⑧ Tail-light: The rear taillights.
⑨ Rear Quarter Trim: Trim pieces near the rear wheels.
⑩ Front Reg. Plate: The license plate area at the front.
⑪ Left & Right Indicator: The front indicator lights.
⑫ Instrument Cluster: The dashboard/instrument panel area.
⑬ Air Conditioning: The air conditioning vents or controls.
⑭ Front Grille Decal: A decal for the front grille.
⑮ Side Mirror: Another view of the side mirrors.
⑯ Reflective Plate: A reflective plate, possibly for the rear.
04 Sticker Position
Textual description of diagram: The diagram illustrates the placement of various decals on the RC car:
Front Reg. Plate: A decal for the front license plate area, labeled "D-WPL".
Left & Right Indicator: Decals for the front indicator lights.
Front Decal: A prominent decal for the front of the car, showing Chinese characters "天津大发" (Tianjin Dafa).
Front Grille Decal: A decal for the front grille.
Instrument Cluster: A decal representing the car's dashboard/instrument panel.
Air Conditioning: A decal for the air conditioning controls.
Side Mirror: Decals for the side mirrors.
Rear Reg. Plate: A decal for the rear license plate area.
Rear Quarter Trim: Decals for the rear quarter panel trim.
Tail-light: Decals for the rear taillights.
05 Function
Note: Please fully charge battery before use.
Textual description of diagram: The diagram shows a top-down view of the RC car, indicating forward and backward movement via a throttle trigger and left/right steering via a steering wheel/knob.
Operation:
Pull the throttle trigger to move the car forward. Push the throttle trigger forward to reverse. Pulling the trigger halfway results in slow forward movement; pulling it fully results in full speed forward movement.
Rotate the steering clockwise to steer right; rotate the steering counter-clockwise to steer left.
How to - Centering Steering:
If the car steers to the left while moving forward, rotate the centering knob to the right. If the car steers to the right, rotate the centering knob to the left.
Textual description of diagram: A diagram illustrates the steering mechanism. It shows a 'Centering Knob' with labels 'Rotate Right for Left Bias' and 'Rotate Left for Right Bias', indicating how to adjust the steering alignment.
Binding Procedure
Turn on the remote.
Turn on the car.
Rotate steering to left or right to complete binding.
Note: After turning on the remote, do not move the throttle trigger before binding is completed.
Textual description of diagram: A small diagram shows a remote control with a steering wheel and throttle trigger, with an arrow indicating the binding process.
Remote Control Functions
Textual description of diagram: The diagram illustrates the remote control layout:
Steering Alignment: Adjusts the neutral position of the steering.
Steering Rate: Controls the sensitivity of the steering.
Power Indicator: Shows the status of the remote's power.
ON/OFF Switch: Powers the remote on or off.
Throttle Rate: Controls the sensitivity of the throttle.
Forward/Backward Throttle Trigger: Controls the car's forward and reverse movement.
Left/Right Steering: The steering wheel controls the left and right direction.
Steering Alignment: Another label for steering adjustment.
07 Things to note
Observe polarity when changing the battery.
Do not recharge non-rechargeable batteries.
Adult supervision is required during charging.
Do not mix new, used, or different types of batteries.
Observe radio interference from the surroundings, as it may affect radio control range.
If the car is moving slowly, it may mean the battery voltage is low. Please recharge the battery as instructed above.
If the Power Indicator on the remote is dim or off, the battery may be weak. Please change the battery.
When not in use for a prolonged period, please switch the remote to OFF position and remove the batteries.
08 Troubleshooting
Problem
Cause
Solution
Unable to control the car
Battery is weak/voltage low
Recharge or change to another battery.
Battery is installed incorrectly
Install battery properly. Notice the polarity.
Switch is at OFF position
Ensure switch on the car and remote is at ON position.
Car moves slowly
Battery is weak/voltage low
Recharge or change to another battery.
Car is out of control range
If the car moves slowly or stopped, please bring the remote close to the car.
Car doesn't track straight
Steering alignment is not properly adjusted
Adjust the steering centering knob. If the car steers to the left, rotate the knob to the right, and vice versa.
Headlight flashes slowly
Pending binding or battery voltage is low
Perform binding again or change the battery.
Headlight flashes quickly
Wheels jamming protection
Release the throttle and ensure the wheels are free from binding/able to rotate freely.
WPL RC RES-V3 Remote Control Circuit Board and Transmitter Guide A comprehensive guide to the WPL RC RES-V3 remote control system, detailing circuit board interface labeling, transmitter switch functions, wiring instructions, polarity considerations, and vehicle binding procedures. Includes technical specifications and support resources.