Instructions for CAL-ROYAL models including: N-MR77 N-MRESC Escutcheon Trim For Exit Device, N-MR77, N-MRESC Escutcheon Trim For Exit Device, Escutcheon Trim For Exit Device, Trim For Exit Device, Exit Device
SKU Numbers: Cal-Royal N-MRESC Escutcheon Trim For Exit Device, Non-Handed
INSTRUCTIONS FOR CAL-ROYAL NMRESC TRIM FOR N-MR7700 / N-MR9800 SERIES MORTISE EXIT DEVICE NMRESC-7700 NMRESC-7730 NMRESC-7740 NMRESC-7705 NMRESC-9800 NMRESC-9830 NMRESC-9840 NMRESC-9805 ,// Exit Device Chasis Mortise Chassis Key locked and Unlock mortise lock Lever operate To open NoCyl, Trim Always Operable Pull when Push bar locked down Dummy Esc Lever Trim Rigid Lever, Cyl Esc Lever Trim 00 function Entrance Attach the collar and mortise cyl to the esc case with mortise mut, attach case to door thrubolting (2) screws to the chasis, aligning spindle to hub 30 function Passage Attach Esc case to door thrubolting the (2) screws to the chasis, allaning spindle to hub of the Chasis 40 function Dummy Attach the cooar and dummy cyl to the esc case with mortise mut, attach case to door thrubolting (2) screws to the chasis, 05 function Storeroom Attach the collar and mortise cyl to the esc case with mortise mut, attach case to door thrubolting (2) screws to the chasis, aligning sprindle to hub DRWG. # EDG4027 1-2 CAL-ROYAL NMRESC Lever Trim For N-MR7700 / N-MR9800 SERIES Method of Change Handing of Lever , LHR (Reverse step for RHR) 1.Lever Trim shipped and supplied with lever positioned neutral, Non-Handed 2-1.Rotate lever to desired hand, LHR, position at 90°~95° 2-2.Fasten guide stop plate to case _,,,,,--- .... k-----__ _,,,. I Guide Stop Plate I Turn the handle I I, 1 I I ' 90·-,5· 1111 \ I \ 3.Done -- 900-950 I ,, Turn the handle I 1.Lever Trim shipped and supplied with lever positioned neutral, Non-Handed 2-1.Rotate lever to desired hand, RHR, position at 90°~95° 2-2.Fasten guide stop plate to case 3.Done 2-2Acrobat Distiller 11.0 (Windows)