Installation Guide for eRapta models including: A1TYZX7, ATYZX7, A1TYZX7 Solar Wireless Backup Camera, Solar Wireless Backup Camera, Wireless Backup Camera, Backup Camera, Camera
eRapta Solar Wireless Backup Camera with 4800mAh Battery, 3 Mins DIY Install, 7" 1080P Monitor, IR Night Vision IP69K Waterproof Rear View License Plate Reverse Cam for Cars Trucks Trailers RV A1TYZX7 : Electronics
File Info : application/pdf, 28 Pages, 7.65MB
DocumentDocumenteRapta Solar Wireless 7 Camera System (ATYZX7) Installation and Operation Guide Foreword Thank you for purchasing our product! eRapta has always been commied to providing high-quality products, and bringing a good experience to our customers. It's our great honor to have your trust! This manual includes product installaon guide and system operaon instrucons. To obtain the best performance, please read the manual carefully before installing, and keep the manual properly. If you're experiencing the following situaons: 1. Open the package, finding something is broken or missing. 2. Open the package, and don't like the product. 3. Order a wrong product. 4. Need technical support. 5. Encounter problems with the camera or monitor in use. 6. Have any other problems or needs. Please feel free to e-mail our aer-sales team at any me: sales2@erapta.com Each of your messages will be answered within 24 hours. We will help you solve your problems, and provide you with the best aer-sales service and technical support! Contents 1. Package List................................................................. 1 2. Introducon and Specificaon..................................... 3 2.1 Specificaon............................................................... 3 2.2 Introducon to Camera.............................................. 3 2.3 Introducon to Monitor............................................. 5 2.4 Introducon to Accessories........................................ 8 3. Installaon Guide........................................................ 11 3.1 Make an Installaon Plan.......................................... 11 3.2 Monitor Installaon.................................................. 12 3.3 Camera Installaon................................................... 14 4. System Operaon........................................................ 16 4.1 Primary Menu............................................................ 16 4.2 Secondary Menu........................................................ 17 4.2.1 Pairing Seng......................................................... 17 4.2.2 Image Parameters................................................... 19 4.2.3 Image Rotaon........................................................ 20 4.2.4 Screen Timeout....................................................... 21 4.2.5 Parking Guideline: ON/OFF..................................... 22 4.2.6 Parking Guideline Adjustment................................ 23 5. FAQ.............................................................................. 24 6. Warranty...................................................................... 25 1. Package Listing Thanks for choosing eRapta solar wireless backup camera system ATYZX7! We are commied to providing you with the best quality products, so our product will serve you for years. Please check the external packaging to see whether there are any signs of rough handling. Also open the package, and check the items to see whether there are damages caused by transportaon. 1 The image above provides an overview of all the items in the package. If any items are missing or damaged, please contact us at : sales2@erapta.com 2 2. Introduction and Specification 2.1 Specificaon The system is designed to observe surroundings and assist parking, including a monitor, a camera, and other accessories needed to install. It requires 12-24 Volt Direct Current power to work. To avoid damage caused by electricity shock or improper installaon, we recommend a qualified and experienced engineer to install the system for you. 2.2 Introducon to Camera Pair buon. Power screen, open the rubber cover, and long press it with a thin sck can achieve pairing. Type-C Charging port. You can charge the camera's baery using 12 volt direct current power through this port. Usually, the baery can be fully charged in 4-6 hours. Indicator Light of Power. When the baery is low, the indicator light will be flashing in red. When charging, the light will stay red. When the baery is sufficient, the 3 indicator light is off. Indicator Light of Pairing. Usually the camera will pair automacally, otherwise select the pair opon and pair them manually. When Pairing is in progress, the light will be flashing in green. When the pairing is successful, the light will stay in green. When the screen is off, the light is off. Camera. This camera is adjustable. You can adjust the lens 60 degrees up and down to obtain the view you want. The camera has a bracket that can be fixed to the license plate, and the camera can be easily installed or removed by pushing. See Part 3 - Installaon Guide. Solar panel. Automac charging is possible when there is no shade and is illuminated by light. 4 2.3 Introducon to Monitor 2.3.1 Icons on the screen : This camera has signal : Camera baery status : Solar charging is in progress 2.3.2 Buons on the monitor There are 6 buons on the top of the monitor. From le to right, they are POWER, +, -, CH, M, S. Please read the operaon Instrucons carefully to learn their funcons. 5 (1) Power on/ off When you are reversing or need to use the reverse system, press to light up the screen and it will automacally connect the camera to show the reverse scene. When all sengs are exited, including the reversing line seng, press when the screen is lit, the screen will turn off and it will automacally disconnect the screen from the camera. (2) Right/Increase When entering the menu, you can select different opons by pressing to move to the right, or pressing - to move to the le, and you can choose the opons by pressing S. When entering the image sengs, you can increase the parameters by pressing and decrease it by pressing -. (3) Le/Decrease When entering the menu, you can select different opons by pressing + to move to the right, or pressing to move to the le, and you can choose the opons by pressing S. When entering the image sengs, you can increase the parameters by pressing + and decrease them by pressing . (4) Parking line switch/adjustment 6 is used for DIY reversing line. There are four opons to adjust the reverse line by pressing , they are height H, width W, posion M, and cancel the reverse line. In the H state, the height of the reversing line can be adjusted by pressing +, -. In the W state, the width of the reversing line can be adjusted by pressing +, -. In the M state, the le and right posion of the reversing line can be adjusted by pressing +, -. also has the funcon of displaying and canceling the reversing line. (5) Menu page/Return When you need to set up the system, you can enter the menu by pressing , select by +, - and confirm the opon by S. Only when entering the image sengs, the has a selecon role, with +, - to make image adjustments. When finished seng, press to exit opons and menus. (6) Selecon Aer pressing M to enter the primary menu, press the to select the seng items and enter. Aer pressing S to enter the secondary menu, press the to confirm the opon and exit the secondary menu. 7 2.4 Introducon to Accessories 2.4.1 Monitor acvate buon 1. It's used to light up the screen when you need to see through camera. 2. It needs to be paired with the monitor before use. Normally, the Pairing is done Before leaving our factory. But you need to repair the buon if it lost paired. See 4.2 for details on how to pair. 2.4.2 Cigaree lighter 1. It's used to provide power to the screen. 2. The red buon above the cigaree lighter turns on/ off the power. 8 2.4.3 Monitor Mount 1. It's used to hold the monitor in the desired posion. 2. Two types of mounts are available depending on the need. 2.4.4 Camera bracket 1. It's used to fix the camera to the license plate. 2.4.5 Antenna 1. It's used to strengthen the signal connecon between the camera and the monitor. 2. It needs to be installed behind the monitor before pairing. 9 2.4.6 Plasc nut 1. It's used to fix the monitor and the monitor mount. 2.4.7 USB charging cable 1. It's used to connect the charger and the camera. 2.4.8 2 Screws 1. It's used to fix the camera bracket to the license plate. 10 3. Installation Guide 3.1 Make an Installaon Plan Before installaon, we recommend you spend a lile me tesng the system. This can help you confirm whether the system works normally before you install it on your vehicle. You can use a 12-24V power supply to power up the monitor and camera. Our camera has been paired with the monitor before they leave our factory. If you want to pair the camera with another channel, please see 4.2 pairing for detailed pairing notes and methods. Based on our experience, we recommend you follow the sequence below to finish installaon: (1) Install monitor (2) Install camera (3) Connect monitor and camera to power supply (4) Adjust the lens of camera according to your needs 11 3.2 Monitor Installaon There are two bracket opons for screen mounng. And it can be mounted to the dashboard or to the windshield. 1. Mount the antenna to the back of the monitor. 2. Select a bracket. Place the plasc nut behind the bracket gimbal as shown in the picture. 3. Insert the bracket gimbal into the gimbal mount at the back of the monitor, as shown in the picture. 4. Place the base in the right posion and choose the right angle of the monitor. Then ghten the plasc nut with the gimbal mount at the back of the monitor. Now, the monitor 12 has been fixed with the monitor mount. 5. When you use the sucon cup holder, first open the sucon cup locking buckle as shown in the posion. Wet the sucon cup with water, fixed in the ideal posion, then press the sucon cup locking buckle. Complete the installaon. 6. When you use the glued simple holder, first sck the 3M double-sided tape to the boom of the holder. Choose the ideal posion and press the base of the holder down hard to complete the fixaon. 7. Insert the Type-C of the cigaree lighter connecon cable into the Type-C socket at the back of the monitor, Insert the cigaree lighter into the car cigaree lighter base and press the red buon above the cigaree lighter to light up it. 8. Screen installaon and connecon is complete. Press the screen on/off key to use. 13 3.3 Camera Installaon 1. Remove the license plate screws. Place the camera bracket in front of the license plate. The bracket direcon as shown In the picture. The screw holes on both sides correspond to the license plate screw holes. Use the screws to fix the bracket to the license plate. 2. Hold the camera close to the bracket, the camera direcon as shown in the picture (logo on top). Push the camera hard from the right side to the le side. When you hear a click, you can confirm that it is installed. 14 3. Check whether the camera has been firmly fixed. Adjust the camera lt angle to find the most suitable viewing angle. 4. When you want to remove it, press the camera against the bracket and push it out from the le side to the right side with force. To prevent it from falling off easily, we ghtened the fixing clips. So when you take it off, you need to use more force. If you encounter any problems in the installaon, please feel free to contact us: sales2@erapta.com We will provide professional technical support within 24h. 15 4. System Operation This part describes the funcons of 5 panels in menu page. You can press M to enter the menu page and adjust sengs by buons on the monitor. When you move the cursor to a panel or a sub-panel, its icon will become gray. You can know where your cursor by icons' colors. 4.1 Primary Menu Pairing seng: Pair the Acvate Buon/Camera to the monitor Image Parameters: Brightness/ Contrast/ Saturaon Image Rotaon: Horizontal/ Vercal Flip Screen Timeout: Setup to turn off the monitor aer 45s/60s/ 90s or turn off this funcon Parking Guidelines: ON/ OFF 16 4.2 Secondary Menu 4.2.1 Pairing Seng Before leaving our factory, the camera has already been paired with the monitor. Generally, the product is automacally paired when the screen is on. But you need to re-pair the camera if it lost paired. We recommend you finish pairing before installing the system on your vehicle, because the monitor and camera needs to be within 3 feet in pairing. Camera system pairing If you need to do it manually, here are the steps: 1.Power up the monitor. 2.Open the rubber cover on the pairing buon of the camera, and long press it with a thin sck unl the system is paired 17 and the flash green light stays on. 3. If it's sll not paired, then follow these steps. Press to enter menu page. Press to select the (Pairing seng). Press to confirm the . Then long press it with a thin sck unl the system is paired successfully and the flash green light stays on. Pairing ps: Make sure the monitor has installed the antenna. Keep the camera and monitor within 3 feet. Monitor acvate buon pairing Press to enter menu page. Press to select (Pairing seng). Press to confirm the . Then press the Monitor acvate buon. It will appear OK under the when it is paired successfully. If the system is sll not paired, Please feel free e-mail to our aer-sales team at any me: sales2@erapta.com 18 4.2.2 Image Parameters 1. Press to enter menu page. 2. Press to select the (Image seng). 3. Select brightness/contrast/saturaon by press . 4. Increase the parameters by pressing and decrease it by pressing . 5. Press to confirm and exit the Secondary menu. 6. Press to exit the menu page. 19 4.2.3 Image Rotaon 1. Press to enter the menu page. 2. Press to select the (Image mirror/Flip seng). 3. Select flip or mirror image by press pressing and . 4. Press to confirm and exit the Secondary menu. 5. Press to exit the menu page. 20 4.2.4 Screen Timeout 1. Press to enter menu page. 2. Press to select the (Display me seng). 3. Select different display me by press pressing and . 4. Press to confirm and exit the Secondary menu. 5. Press to exit the menu page. Tips: When you select off to make the monitor stay on, it will speed up the power consumpon and the life of the camera baery. When you set a certain duraon(45s,60s,90s), you need to press the monitor acvate buon or again to light up it before each use. You can sck the buon to the steering wheel or a more convenient place for easy access. 21 4.2.5 Parking Guidelines: ON/OFF 1. Press to enter menu page. 2. Press to select the (Parking guide line seng). 3. Select on/off by press pressing and . 6. Press to confirm and exit the Secondary menu. 7. Press to exit the menu page. 22 4.2.6 Parking Guidelines Adjustment 1. Press to enter the three different adjustment states of parking guide line, or turn off the parking guide line. 2. When it appears H, the height of the parking guidelines can be adjusted by pressing or . 3. When it appears W, the width of the parking guidelines can be adjusted by pressing or . 4. When it appears M, the le and right posion of the parking guidelines can be adjusted by pressing or . 23 5. FAQ 1. Q: How to solve the problem of "black screen"? A: Check if the screen and camera are successfully paired. Check if the camera has power, and check if the car charger can power the screen. 2. Q: Why does the monitor acvate buon not match and not work? A: The monitor acvate buon needs to be connected to the screen. So this acvate buon has a lithium baery inside. Therefore, it may have run out of the baery when the acvate buon is not working. Replace the baery and pair it with the monitor again then it will work properly. You can contact us if it have run out of the baery or sll not working. 24 6. Warranty Each of your messages will be answered within 24 hours. We will help you solve your problems, and provide you with the best aer-sales service and technical support! Email : sales2@erapta.com Warranty: Lifeme Warranty 25Adobe PDF library 15.00