User Guide for Syntech models including: E500 Rog Ally Dock, E500, Rog Ally Dock, Ally Dock, Dock
Syntech Mini Dock Compatibility with Steam Deck/Steam Deck OLED/ROG Ally/Lenovo Legion Go, 6-in-1 Docking Station with HDMI 2.0 4K@60Hz, Gigabit Ethernet, 3 x USB 3.0, PD Charging Stable Round Doc : Electronics
Amazon.com: Syntech Mini Dock Compatible with Steam Deck/Steam Deck OLED/ROG Ally, 6-in-1 Docking Station with HDMI 2.0 4K@60Hz, Gigabit Ethernet, 3 x USB 3.0, PD Charging Stable Round Doc : Electronics
File Info : application/pdf, 4 Pages, 747.70KB
DocumentDocumentFirmware Upgrade Procedure of Syntech Rog Ally Dock Note : 1. Please make sure to use a Windows system laptop or desktop computer for upgrading, Apple computers or other system computers currently can not support firmware upgrade. 2. When using the computer can not open the normal firmware program, please check whether your computer is set to block the opening and installation of foreign programs, some anti-virus software or computer security software will prevent the opening of the firmware file. Step 1: Download the installation package on LINK: https://syntechhome.com/pages/installation-package-download At the bottom of the page Step 2: You need to prepare a Windows PC first, and connect the PD charging port of Syntech Rog Ally Dock to the PC via USB-C to USB-C or tUSB-C to USB-A cable. Step 3: Locate and double-click the "LT USB Programmer(1).exe" application on the installation package file. Step 4: Click on the "Open" option in the pop-up window. Step 5: Select the firmware programme in the pop-up window: " LT8711UXD_U1_QFN48_Male_DP14_CKS(0x393F80)_SV020116_20230628_BB_Em ark_Switch_SteamDeck_NoUart_5Watt.hex " then click "Burn" to upgrade the firmware. Step 6: After clicking "Burn" to upgrade the firmware, the progress bar will show from 0% to 100% completion. When "The Device tool written successfully" appears on the interface, it means the firmware has been upgraded successfully.