Creavit AL55800 Wall-Hung Closet with Integrated Mixer
Product Code: AL55800
Brand: Creavit Belgium
Manufacturer: Aloni
Technical Drawing and Dimensions
This section provides the technical specifications and dimensions for the Creavit AL55800 wall-hung closet with an integrated mixer.
Overall Dimensions (Front View):
- Width: 360 mm
- Depth: 515 mm
- Height: 440 mm
Side View Dimensions:
- Wall mounting height at rear: 145 mm
- Mixer tap hole diameter: 90 mm
Connection and Mounting Details (Bottom/Rear View):
The drawing indicates specific placement and dimensions for water connections, waste outlet, and wall mounting points. Key dimensions include:
- 160 mm
- 180 mm
- 27 mm
- 35 mm
- 95 mm
- 110 mm
- 280 mm
- 50 mm
- 112 mm
- 450 mm
- 310 mm
- 190 mm
The product features an integrated mixer for hot and cold water, with a connector pipe for water supply.
Installation Instructions
Follow these steps for the installation of the Creavit AL55800 wall-hung closet with integrated mixer.
Parts Included:
| Identifier | Part Name | Description |
|---|---|---|
| A | Allen Spanner | Tool for tightening screws. |
| B | Centering Part | Component for alignment. |
| C | Centering Part | Component for alignment. |
| D | Holding Screw | Screw for securing components. |
| E | Steel Holding Bar | Main support structure for wall mounting. |
| F | Tightening Part | Component for securing connections. |
| G | Integrated Mixer | Combined hot and cold water mixer with connection pipes. |
| H | Connector Pipe | Pipe for connecting water supply. |
Installation Steps:
- Prepare Mixer: Assemble the parts of the integrated mixer (G) as shown in the diagram.
- Install Wall Bracket: Fasten the steel holding bar (E) into the wall structure, ensuring it is securely mounted in the direction indicated by the arrow.
- Position Closet: Place the wall-hung closet onto the installed steel holding bar (E) and adjust its position for proper alignment.
- Secure Closet: Use the Allen spanner (A) to fix the closet to the holding bar (E), ensuring it is stable.
- Connect Water Supply: Attach the water supply fittings and connector pipes (H) to the designated installation points on the closet. Fasten these connections securely with a spanner. Apply silicone sealant at the indicated locations to ensure a watertight seal.
- Final Tightening: Use the Allen spanner (A) to fasten any remaining screws or components in the direction of the arrow, completing the installation.
