User Manual for Netac models including: 2BEBP-TW02G, 2BEBPTW02G, tw02g, TW02G Wireless Earbuds, TW02G, Wireless Earbuds, Earbuds
Beijing Netac Innovation Technology Development Co.Ltd TW02G Wireless Earbuds 2BEBP-TW02G 2BEBPTW02G tw02g
128g "Netac TW02G", MFB3 MFB5 . TWS Netac TW02G Dongle (Dongle Dongle Type-CUSB+Dongle OTG Dongle Dongle Type-C USB Dongle Type-CUSB+Dongle L (/) () R ( (/) () , L R / /() / / 2/ /( :TW02G :300mAh :1.5H :12mm :DC5V 350mA :35mAh :5.5H(Earbuds) +22H(Charging Case 43±5g :10M , Power ON/OFF Touch & hold both left and right earbud for 3S to Powe on Manual startup Open the case , then Earbuds will power on automatically Auto startup Touch area Touch & hold either left or right earbud for 5S to Powe off (When Left and right earbuds are connect, Long press L/R earbud to turn off both of the ear buds) Manual shutdown Put earbuds into charging case and close the case , it will power off automatically Auto shutdown Bluetooth connectivity After the headset is turned on, the indicator light on one side displays green light, and the indicator light on the other side displays headphones Off. At this time, you can search the pairing name in the Bluetooth list of the mobile phone: "Netac TW02G", click the pairing name to connect CONECTED Bluetooth Bluetooth FIND THE DEVICE Bluetooth Bluetooth DEVICE Netac TW02G Dongle Connection (Dongle needs to be purchased separately) Insert Dongle into your phone and automatically connect the earbuds. Insert Type-C to USB adapter +Dongle into the computer to automatically connect the earbuds. The Earbuds automatically enter game mode Some mobile phones require manual active OTG function. Plug-in Dongle automatic connection device Dongle Type-C to USB port adapter Dongle Type-C to USB port adapter+Dongle Music Control TOUCH ZONE L TOUCH 1X volume down TOUCH 2X TOUCH 3X R TOUCH 1X Volume increase TOUCH 2X TOUCH 3X Control Calling L R TOUCH L/R 4X In/out (siri) TOUCH L/R 1X TOUCH L/R 2X Long press L/R 2s When the earbuds are not connected TOUCH L/R 5X (Restore factory settings) Charging Description When the earbud battery is low with warning tone. Please put it into the charge case to charge it in time. BLINK Light On Specifications Model:TW02G Charging Case:300mAh Charging Time:1.5H Speaker Unit:12mm Input:DC5V 350mA Earbud Battery:35mAh Play Time:5.5H(Earbuds) +22H(Charging Case Product Weight43±5g BT Distance10M matters needing attention Please store and use this product in normal temperature environment; Do not expose this product to rain or humid environment for a long time; Do not throw it to avoid product damage caused by falling; Do not disassemble, repair or transform this product by yourself; Please use the power charger with rated voltage to charge; Unauthorized disassembly will invalidate the warranty. The batteries in the charging stand and earphone are non replaceable batteries Do not expose to such conditions as sunlight, fire or similar overheating FCC Caution This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.Adobe PDF library 17.00 Adobe Illustrator(R) 24.0