Xiaomi Pad Keyboard Quick Start Guide

Introduction

Thank you for choosing the Xiaomi Pad Keyboard. This product is only compatible with the Xiaomi Pad 5.

Getting Started: Connecting Your Keyboard

Follow these steps to connect your Xiaomi Pad Keyboard:

1. Place the keyboard flat. Align the tablet with the keyboard's connector.
2. Slide the tablet downwards onto the keyboard connector.
3. The tablet is now attached and can be propped up using the keyboard's stand.

Note: The keyboard will only enter operating mode once the Pad and keyboard have been linked together correctly as shown above.

Power Supply

The Pad will provide power to the keyboard once the two have been fitted together.

For more information, visit our official website: www.mi.com/global/service/userguide

Important Safety Information

• Use only authorized accessories compatible with your device.
• Input: 5V=30mA.
• Operating temperature range: 0°C to 40°C. Storage temperature range: -20°C to 45°C. Using the device outside this range may damage it.
• Keep your device dry.
• Do not attempt self-repair. Contact Mi customer support or an authorized repair center for issues.
• Connect other devices according to their manuals. Do not connect incompatible devices.
• This device is not a toy. Exercise caution with electrical products to reduce the risk of electric shock. Parents should caution children about potential hazards.

Safety Precautions

• Observe all applicable laws and rules restricting device use in specific situations and environments.
• Do not use in hospital operating rooms, emergency rooms, or intensive care units. Always comply with hospital rules and regulations. If you have a medical device, consult your doctor and the device manufacturer to determine if your device may interfere with its operation. Maintain a minimum distance of 15 cm from pacemakers. Avoid use near hearing aids, cochlear implants, or similar devices.
• Do not use in high humidity areas (e.g., bathrooms) to avoid electric shock, injury, fire, or charger damage.

WEEE (Waste Electrical and Electronic Equipment)

Special precautions must be taken to safely dispose of this product. This marking indicates that this product may not be discarded with other household waste in the EU. To prevent harm to the environment or human health from inappropriate waste disposal, and to promote sustainable reuse of material resources, please recycle responsibly. To safely recycle your device, please use return and collection systems or contact the retailer where the device was originally purchased. For our Environmental Declaration, please visit: www.mi.com/en/about/environment

EU Regulations

EMCD Declaration of Conformity: Xiaomi Communications Co., Ltd. declares that this product (M2107K81RC) complies with the essential requirements and other relevant provisions of the EMC Directive 2014/30/EU. The full text of the EU declaration of conformity is available at: www.mi.com/en/certification

Legal Information: This device may be operated in all EU member states. Observe national and local regulations where the device is used.

FCC Regulations

This device complies with Part 15 of FCC Rules. Operation is subject to two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

FCC Note: The manufacturer is not responsible for interference caused by unauthorized modifications. Such modifications may void user authority. This equipment has been tested and found to comply with Class B digital device limits (Part 15 FCC Rules) for reasonable protection against harmful interference in residential installations. If interference occurs, users are encouraged to try measures like reorienting the antenna, increasing separation, or connecting to a different circuit. Consult dealer or technician for help.

Disclaimer: This quick start guide is published by Xiaomi or its local affiliate. Improvements and changes may be made without notice. Illustrations are for reference only and may not accurately depict the actual device.