Instruction Manual for Godox models including: BG02 Godox Battery Grip, BG02, Godox Battery Grip, Battery Grip, Grip
4 апр. 2025 г. — 重要安全须知与注意事项 Godox 品牌LED 摄影灯为专业设备, 特别是大功率输出的摄影灯, 仅限具备资 质的技术人员操作。 使用前请务必完整阅读并理解产品说明书, 严格遵循安 ...
31 mars 2025 — 禁止使用损坏的产品。产品在使用过程中，因跌落、受到挤压或遭受强烈冲击. 而造成外壳破裂，请勿继续使用，以免因接触到内部电子元件而受到电击伤害。
File Info : application/pdf, 24 Pages, 1.41MB
DocumentDocument ( ) Godox Battery Grip
Instruction Manual
V1.1
Godox LED , , , :
, , , , , , CCC , , , , ,
1
BG02 1/4" D-TAP Type-C
2
1. 1/4" 2. 3. 4. D-TAP
5. Type-C 6. 7.
3
8. 1/4" 9. 1/4" 10.
5/8" x1
Type-C x1
x1
D-TAP x1
x1
ML100R 1. 1/4" 1/4"
4
2.
3. Type-C Type-C
5
4. D-TAP D-TAP
AD200ProII 1.
6
2. D-TAP
: 1. 1.5N*M 2. 3.
Type-C
Type-C Type-C
25 2550 5070 75 100 100
7
100ms 2s 10s Type-C 1s 2
Type-C
D-TAP
BG02 14.4V6600mAh95.04Wh 5V 3A9V 2A12V 15V 3A20V 3A 5V 3A9V 3A12V 15V 3A 20V 5A 14.4V 10A 0 45 54mm*45mm*238mm 636g
1.5A 3A
8
9
:
( ) 12
0755-29609320-8062
10
Important Safety Instructions and Precautions
Godox LED lights, especially those with high power output, are professional equipment and should only be operated by professionals. Carefully read and fully understand the instruction manual before use and strictly follow the safety instructions. Failure to do so may result in death, serious injury, damage to the product, or other property damage.
Danger
Do not use damaged product. Stop using immediately if the product shell is cracked due to falling, squeezing, or strong impact, to avoid touching the internal electronic components and getting an electric shock. Do not block or cover the heat dissipation port of the product. After use, the product should be completely cooled before packaging. Some products have built-in lithium batteries. Please use a dedicated charger to charge, and use them within the specified voltage and temperature range according to the correct operating instructions.
Warning
Danger of explosion if the battery are not replaced properly, danger of fire or explosion if replaced with the wrong type of battery pack, replace only with battery of the same type or equivalent. Replace by service personnel only, not general personnel.Do not disassemble the product or disassemble the battery. The battery must not be exposed to conditions such as sunlight, fire, or similar excessive heat. Do not expose to rain or water. Consumers who use a power adapter for charging should purchase a power adapter that is CCC certified and meets the standard requirements. The Battery is not allowed to be disassembled, hit, crushed or thrown into fire. Do not continue to use if it is seriously inflated. Do not place in a hightemperature environment. Do not use after immersion in water.
11
When using, it should be placed in a place where it is easy to dissipate heat, and should not be placed on the bedside, bedding, in a package or other environments that are not easy to dissipate heat. Keep out of contact with infants and young children, and children should use under adult guidance.
Attention
All transport protective materials and packages on the product must be removed before use. When not in use, please turn off the product and stop the power supply promptly. Before storing, make sure that the equipment has cooled down completely. For storage, unplug the power cord from the equipment. The equipment should be placed in the carrying case or in a ventilated dry place. The safety instructions are formulated according to the strict testing of the factory, and the design and specifications of the equipment are subject to change without prior notice. Customers can view the latest electronic instruction manuals on the official website of Godox and learn about the latest product information.
Foreword
Thank you for purchasing Godox battery grip BG02 is designed to supply power and handheld support for small fixtures. With the characteristics of large-capacity lithium battery, flexibly adjustable mount, 1/4" screw port with adapter screw for light stand, D-TAP and USB-C dual-port, it's applicable to travel photography, creative creation, life writing and other scenes.
12
Names of Parts
1. 1/4" Screw 2. Locking Device 3. Direction Adjusting Knob 4. D-TAP Port 5. USB-C Port
6. Battery Level Indicator 7. Power Switch Button 8. 1/4" Screw Port 9. 1/4" Screw Port 10. Lanyard Hole
13
What's Inside
5/8" Screw Pin x1
USB-C Cable x1
Battery Grip x1
D-TAP Cable x1
Instruction Manualx1
Note: Due to continuous updates and upgrades of the products, there may be differences between the actual products and the pictures. Therefore, the pictures are for reference only, products to prevail in kind.
Using Instructions
With LED Light ML100R 1. Align the 1/4" screw port on the fixture with the 1/4" screw on the mount of battery grip, then rotate the locking device until it is tightened.
14
2. Loosen the direction adjusting knob by rotating counterclockwise, adjust the mount to the desired angle, and then tighten the direction adjusting knob by rotating clockwise.
3. Connect the fixture to the USB-C port on the battery grip with the attached USB-C cable, then power on the fixture.
15
4. Connect the fixture to the D-TAP port on the battery grip with the attached D-TAP cable, then power on the fixture. Note: No need to press the power switch button, the battery grip will start to supply power when it is connected to the fixture, and the battery grip will be turned off by pressing the power switch button twice.
With Flash AD200ProII 1. Install the fixture onto the mount.
16
2. Install the dummy battery onto the fixture then insert the cable into D-TAP port on the grip, then power on the fixture
Note: 1. The max torque to which the mount subjected is 1.5N*M. 2. The above fixture is sold separately. 3. When not in use, please unplug the power cord before placing it.
Charging Through USB-C Port
Insert the attached USB-C cable into the USB-C port on the battery grip, then connect to the power supply to charge it. When the battery level is low, please charge it in time before using or placing it.
Check the Charging Status by Battery Level Indicators
Battery level below 25%: Four indicators turn on sequentially from left to right and then all turn off, and then cycle again. Battery level 25% 50%: Battery indicator is constant on, battery indicators turn on sequentially and then all turn off, and then cycle again. Battery level 50% 70%: Battery indicators are constant on, battery indicators turn on sequentially and then both turn off, and then cycle again. Battery level 75% 100%: Battery indicators are constant on, battery indicator is flashing.
17
Battery level 100%: All four indicators are constant on without flashing, fully charged.
Power Switch Button
Continuous pressing time more than 100ms but less than 2s is called short press action. In the low-power mode, short press will turn on the battery level indicator and enter the no-load state. If a charging or discharging device is detected, it will enter the corresponding charging or discharging state. In the no-load state, if no charging or discharging device access is detected in the USB-C port for a sustained period of 10s, then it will enter the low-power state. Two consecutive short presses within 1s in no-load state will turn off the device and enter the low-power state, and the battery level indicators and discharge output will also be turned off.
Technical Data
Model Lithium Battery Parameters USB-C Port
D-TAP Port Working Environment Temperature Dimension Net Weight
BG02 14.4V 6600mAh 95.04Wh
Input5V 3A9V 2A12V 1.5A 15V 3A20V 3A Output5V 3A9V 3A12V 3A 15V 3A 20V 5A Output14.4V 10A 0 45
2.13"*1.77"*9.37" 636g
Specifications and data may subject to changes without notice.
18
FCC Caution
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
IC Warning
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement
Declaration of Conformity
GODOX Photo Equipment Co.,Ltd. hereby declares that this equipment are in compliance with the essential requirements and other relevant provisions of Directive 2014/35/EU,2014/30 EU. They are allowed to be used in all EU member states. For more information of DoC, Please click this web link:https: //www.godox.com/eu-declaration-of-conformity/
19
Warranty
Dear customers, as this warranty card is an important certificate to apply for our mainte- nance service, please fill in the following form in coordination with the seller and safe-keep it. Thank you!
Product Information Customer Information
Seller Information Note:
Model Name Address Name Contact Number Address Date of Sale
Product Code Number Contact Number
Note: This form shall be sealed by the seller.
Applicable Products
The document applies to the products listed on the Product Maintenance lnformation (see below for further information). Other products or accessories (e.g. promotional items, giveaways and additional accessories attached, etc.) are not included in this warranty scope.
20
Warranty Period The warranty period of products and accessories is implemented according to the relevant Product Maintenance lnformation. The warranty period is calculated from the day(purchase date) when the product is bought for the first time, And the purchase date is considered as the date registered on the warranty card when buying the product.
How to Get the Maintenance Service If maintenance service is needed, you can directly contact the product distributor or authorized service institutions. You can also contact the Godox after-sale service call and we will offer you service. When applying for maintenance service, you should provide valid warranty card. If you cannot provide valid warranty card, we may offer you maintenance service once confirmed that the product or accessory is involved in the maintenance scope, but that shall not be considered as our obligation.
21
Inapplicable Cases The guarantee and service offered by this document are not applicable in the following cases: . The product or accessory has expired its warranty period; . Breakage or damage caused by inappropriate usage, maintenance or preservation, such as improper packing, improper usage, improper plugging in/ out external equipment, falling off or squeezing by external force, contacting or exposing to the improper temperature, solvent, acid, base, flooding and damp environments, etc; . Breakage or damage caused by non-authorized institution or staff in the process of installation, maintenance, alternation, addition and detachment; . The original identifying information of product or accessory is modified, alternated, or removed; . No valid warranty card; . Breakage or damage caused by using illegally authorized, nonstandard or nonpublic released software; . Breakage or damage caused by force majeure or accident; . Breakage or damage that could not be attributed to the product itself. Once met these situations above, you should seek solutions from the related responsible parties and Godox assumes no responsibility. The damage caused by parts, accessories and software that beyond the warranty period or scope is not included in our maintenance scope. The normal discoloration, abrasion and consumption are not the breakage within the maintenance scope.
22
Maintenance and Service Support Information
The warranty period and service types of products are implemented according to the following Product Maintenance Information:
Product Type Name
Parts with electrical properties
Other Items
Circuit board
Cable, or other packages, etc.
Maintenance Period(month) 12
NO
Warranty Service Type
Customer sends the product to designated site
Without warranty
Godox After-sale Service Call 0755-29609320-8062
Wechat Official Account
: 2 : 0755-29609320(8062) : 0755-25723423 : godox@godox.com
GODOX Photo Equipment Co., Ltd.
Add.: Building 2, Yaochuan Industrial Zone,Tangwei Community, Fuhai Street, Bao'an District, Shenzhen 518103, China Tel: +86-755-29609320(8062) Fax: +86-755-25723423 E-mail: godox@godox.com
www. godox. com Made in China | 705-BG0200-02