ATID / 에이티아이디 - UHF RFID Reader Provider in Koreamailto:%20inquiry@atid1.commailto:inquiry@atid1.com
ATID / 에이티아이디 - UHF RFID Reader Provider in KoreaATID / 에이티아이디 - UHF RFID Reader Provider in Korea
Shenzhen NST Industrial & Trade Co.,Ltd.
Instruction Manual for Atid models including: VUJ-AT909, VUJAT909, AT909 Powerful All-In-One UHF RFID Reader, AT909, Powerful All-In-One UHF RFID Reader, All-In-One UHF RFID Reader, UHF RFID Reader, RFID Reader, Reader
ATID Co., Ltd AT909 VUJ-AT909 VUJAT909 at909
File Info : application/pdf, 5 Pages, 524.42KB
DocumentDocumentAT909 Powerful All-In-One UHF RFID Reader High performance Mobile Computer - High pAendrrfooidrm13ance Mobile Computer - - AndOrocitad-C1o3re 2.0GHz - - Octa5.-5C"oHrDe D2.is0pGlaHyz - 4G LTE, WIFI, BLE V4.2, GPS - 5.5 Inch HD Display - 1D & 2D Barcode Scanning - - 4G LDTuEa,l CWaLmAeNra, B(5LMEPV/41.32M, PG)PS - - 1D &7,220D0mBAahrcRoedcehaSrcgaenabnlienBgattery - - DuaIlPC65am/ Derroap (15.5MmP / 13MP) Exce-lle7n,t2R0F0IDmRAehadLiintghPiuermfo-rImonanBceattery - - IP65UH/FDErPoCp G1.E5Nm2, ISO / IEC 18000 - 6C - 10m Reading range - ExcellCeinrctulRarFlyIPDolaRreizaeddAinngtenPnear(f4odrBmi) ance - UHF RFID EPC GEN2, ISO / IEC 18000-6C - 10m Reading range - Circularly Polarized Antenna (4.5 dBi) Homepage : www.atid1.com e-mail : Tel : +82-2-544-1436 AT909 Specification PERFORMANCE Processor Cortex A73, 2.0 GHz, Octa-Core Memory RAM 4GB / ROM 64 GB Operating System Android 13 PHYSICAL CHARACTERISTICS Dimensions (L x W x H) 170 x 80 x 145 mm Weight 600g (with Battery) Power 7,200 mAh / Lithium-Ion Battery Adaptor : DC 5V / 2A Display USB Interface 5.5'' IPS HD (720 x 1440) 1 USB Poart / Type-C Notification LED Indicator, Speaker, Vibrator 2 x Sim Card Slot Slot 2 x PSAM Card Slot 1 x TF Memory Slot (Support up to 256GB) DATA COLLECTION Protocol EPC GEN2, ISO/IEC 18000-6C Reading Range ~ 10 m (Depending on environment and tag type) Writing ~ 0.5m UHF RFID Range (Depending on environment and tag type) RF Output 1W / 30 dBm (Max) Support US / FCC : 902 ~ 928 MHz Frequency EU / CE (Optional) : 865 ~ 868 MHz Antenna Circulary Polarized Antenna / 4.5 dBi HF RFID (Optional) Frequency : 13.56MHz Protocol : ISO 14443A & 15693, NFC-IP1, NFC-IP2 R/W Range : 2 ~ 5 cm Barcode 2D Engine (Support to read 1D & 2D Barcode) Camera Front Rear 5M Pixel 13M Pixel WIRELESS COMMUNICATION Bluetooth BT V2.1+EDR / BLE V5.0 GPS Embedded A-GPS, Tolerance ±5m WLAN 802.11 a/b/g/n/ac (2.4GHz / 5GHz) 2G : GSM / GPRS / EDGE (850 / 900 / 1800 / 1900 MHz) WWAN 3G : WCDMA (850 / 900 / 1900 / 2100 MHz) 4G : TD-LTE (Band 38 / 39 / 40 / 41) FDD-LTE (Band 1 / 2 / 3 / 4 / 5 / 7 / 8 / 12 / 17 / 20) USER ENVIRONMENT Operation Temperature Storage Temperature Humidity Drop Secification Sealing -20°C to 50°C -20°C to 70°C 5 ~ 95% RH (non-condensing) 1.5 m / 5 ft IP65 * All Features and specifications described are subject to change without notice. ANDROID CPU MEMORY 13 2.0 GHz 4GB/64GB RFID BARCODE BT / BLE IP65 Drop 1.5m Certification 4G LTE CAMERA WLAN Accessories AC Adaptor 5V / 2A USB Cable Hand Strap FCC CAUTION This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction Specific Absorption Rate (SAR) information: This product meets the government's requirements for exposure to radio waves. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons regardless of age or health. FCC RF Exposure Information and Statement The SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue. Device type: AT909 (FCC ID: VUJ-AT909) was also tested against these values. The highest reported SAR values for head, body-worn, Hotspot accessory are 0.33 W/kg, 0.55 W/kg, 1.14 W/kg respectively. The device tested typical body wear operations with the back of the product 10mm from the body. To meet FCC RF exposure requirements, use accessories that maintain a separation distance of 10mm between the user's body and the back of the product. The use of belt clips, holsters and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements, and should be avoided. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. CE CAUTION Manufacturer's Name: ATID CO., LTD. Product name: Portable reader Trade Mark: N/A Model number: AT909 Operating Temperature: 0° C to 35° C This device in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. All essential radio test suites have been carried out. The construction of the radio equipment of this product complies with the applicable European requirements for the use of the radio spectrum. The RF frequencies can be used in Europe without restriction. This product is intended for sale and application in a business environment. Function Operation Frequency Modulation E-GSM900: Tx: 880-915MHz, Rx: 925-960MHz 2G DCS1800: Tx: 1710-1785MHz, Rx: 1805-1880MHz GPRS: GMSK EGPRS : 8PSK WCDMA Band I: Tx: 1920-1980MHz, Rx: 2110-2170MHz 3G WCDMA Band VIII: Tx: 880-915 MHz, Rx: 925-960 MHz QPSK Max RF Output power 31.85dBm 23.30dBm LTE Band1: Tx:1920-1980 MHz, Rx: 2110-2170 MHz LTE Band3: Tx: 1710-1785MHz, Rx: 1805-1880MHz LTE Band7: Tx: 2500-2570MHz, Rx: 2620-2690MHz LTE Band8: Tx: 880-915MHz, Rx: 925-960MHz 4G LTE Band20: Tx: 832-862MHz, Rx: 791-821MHz QPSK, 16QAM LTE band38: Tx: 2570-2620MHz, Rx: 2570-2620MHz LTE band40: Tx: 2300-2400MHz, Rx: 2300-2400MHz 24.12dBm WIFI: IEEE 802.11b/g/n HT20: 2412-2472MHz 2.4G WIFI IEEE 802.11n HT40: 2422-2462MHz DSSS, OFDM 5GWIFI IEEE 802.11a/n/ac(20M): 5150MHz ~5250MHz/ 4 channel IEEE 802.11n/ac(40M): 5150MHz ~5250MHz/ 2 channel IEEE 802.11ac(80M): 5150MHz ~5250MHz/ 1 channel IEEE 802.11a/n/ac(20M): 5250MHz ~5350 MHz/ 4 channel IEEE 802.11n/ac(40M): 5250MHz ~5350 MHz/ 2 channel IEEE 802.11ac(80M): 5250MHz ~5350 MHz/ 1 channel OFDM IEEE 802.11a/n/ac(20M): 5725MHz ~5850MHz/ 5 channel IEEE 802.11n/ac(40M): 5725MHz ~5850MHz/ 2 channel IEEE 802.11ac(80M): 5725MHz ~5850MHz/ 1 channel BT RFID NFC EDR: 2402-2480MHz BLE: 2402-2480MHz 865.7-867.5MHz 13.56MHz EDR: GFSK, /4 DQPSK, 8DPSK BLE:GFSK ASK ASK 15.36dBm 14.62dBm 7.99dBm 29.973dBm 28.28 dBuA/m at 3m The use of the 5150 5350 MHz band is restricted to indoor use only. This restriction will be applied in all member states. Restrictions in the 5 GHz band: According to Article 10 (10) of Directive 2014/53/EU, the packaging shows that this radio equipment will be subject to some restrictions when placed on the market in Belgium (BE). Bulgaria (BG), the Czech Republic (CZ),Denmark (DK), Germany (DE), Estonia (EE), lreland (IE), Greece (EL), Spain(ES), France (FR), Croatia (HR), Italy (IT), Cyprus (CY), Latvia (LV), Lithuania(LT), Luxembourg (LU), Hungary (HU), Malta (MT), Netherlands (NL) Austria(AT) Poland (PL), Portugal (PT), Romania (RO), Slovenia (Sl) Slovakia (SK),Finiand (Fl). Sweden (SE) Turkey (TR) Norway(NO), Switzerland (CH). Iceland (IS), and Liechtenstein (LI). The host manufacturer has the responsibility that the host device should be compliance with all essential requirement of RED. The simplified EU declaration of conformity referred to in Article 10(10) shall be provided as follows: Hereby. Advanced Technologies SRL declares that the radio equipment type Tablet PC is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www.nst-it.com. SAR After laboratory measurement. The highest reported SAR values for head, body-worn accessory are 0.50 W/kg, 1.06 W/kg respectively. The device complies with RF specifications when the device used at 5mm form your body. Partners Tower 1 #1402, 83, Gasan Digital 1-Ro, Geumcheon-gu, Seoul, Republic of Korea (zip code : 8501) Tel: +82-2-544-1436 Fax: +82-2-859-0045 Contact Us: inquiry@atid1.com www.atid1.com