User Manual for VigilLink models including: VLEX-HT2070R-TR 18Gbps HDBaseT Extender 70m with ARC, VLEX-HT2070R-TR, 18Gbps HDBaseT Extender 70m with ARC, HDBaseT Extender 70m with ARC, Extender 70m with ARC, 70m with ARC
Index of /wp-content/img/download
User mauals - Extenders — VigilLink
VLEX-HT2070R-TR — VigilLink
VLEX-HT2070R-TR 18Gbps HDBaseT Extender 70m with ARC VER 1.0 Thank you for purchasing this product Please read these instructions carefully for optimum performance and safety before connecting, operating, or adjusting this product. Please keep this manual for future reference. A Surge protection device is recommended. This product contains sensitive electrical components that electrical spikes may damage, surges, electric shocks, lightning strikes, etc. The use of surge protection systems is highly recommended to protect and extend the life of your equipment. Table of Contents 1. Introduction. ......................................................................................... 1 2. Features................................................................................................ 1 3. Package Contents............................................................................... 2 4. Specifications....................................................................................... 2 5. Operation Controls and Functions. .................................................... 4 5.1 Transmitter Panel. .......................................................................... 4 5.2 Receiver Panel............................................................................... 5 5.3 IR Pin Definition ............................................................................... 7 6. Application Example. ......................................................................... 8 1. Introduction This 18Gbps HDBaseT Extender can extend the HDMI signal, bi-directional IR control signal, ARC signal, and RS-232 control signal to a distance up to 70m / 230ft via a single CAT5e/6 cable. This product converts HDMI signal to standard HDBaseT signal and transmits it through a LAN cable. It can easily control the signal source devices or display devices from the remote end through a bi-directional IR signal pass-through function. Video resolution up to 4K2K @60Hz. It supports ARC and PoC functions. The extender can be widely used in other fields such as video conference systems, multimedia signal broadcasting, HDMI signal extension, etc. 2. Features HDMI2.0b and HDCP 2.2 compliant Supports 18Gbps video bandwidth Supports video resolution up to 4K2K@60Hz RGB/YCbCr 4:4:4 The transmission distance can be extended up to 70m / 230ft via a single CAT5e/6 cable Supports bi-directional IR and RS-232 control signal pass-through Supports ARC function, audio formats support Dolby 5.1, DTS 5.1, PCM2.0, etc. Advanced EDID management Supports PoC (Power over Cable) function Compact design for easy and flexible installation 1 / 8 3. Package Contents 1 x 18Gbps HDBaseT Extender (Transmitter) 1 x 18Gbps HDBaseT Extender (Receiver) 1 x IR Blaster cable (1.5 meters) 1 x IR Wideband Receiver cable (1.5 meters) 2 x 3pin-3.81mm Phoenix Connectors (male) 4 x Mounting Ears 8 x Machine Screws 1 x 24V/1A Locking Power Adapter 1x User Manual 4. Specifications Technical HDMI Compliance HDCP Compliance Video Bandwidth Video Resolution IR Level IR Frequency Transmission Distance Color Space Color Depth HDR Audio Formats HDMI 2.0b HDCP 2.2 18Gbps Up to 4K2K@60Hz RGB/YCbCr 4:4:4 5Vp-p Wideband 20K-60KHz 70m via a single CAT5e/6 cable RGB, YCbCr 4:4:4, YCbCr 4:2:2 8-bit, 10-bit, 12-bit (1080P) 8-bit (4K60) 8-bit, 10-bit, 12-bit (4K24/30) HDR, HDR10, HDR10+, Dolby Vision, HLG HDMI: LPCM 7.1CH, Dolby True HD, and DTS-HD Master Optical: Dolby 5.1, DTS 5.1, PCM 2.0 2 / 8 Connection Transmitter Input: 1×HDMI IN [TypeA, 19-pin female] Output: 1×HDBT OUT [RJ45] 1×SPDIF OUT Control: 1×RS-232 [3pin-3.81mm Phoenix connector] 1×SERVICE [Micro-USB jack] 1×IR IN [3.5mm Stereo Mini-jack] 1×IR OUT [3.5mm Stereo Mini-jack] Receiver Input: 1×HDBT IN [RJ45] 1×SPDIF IN Output: 1×HDMI OUT [TypeA, 19-pin female] Control: 1×RS-232 [3pin-3.81mm Phoenix connector] 1×SERVICE [Micro-USB jack] 1×IR IN [3.5mm Stereo Mini-jack] 1×IR OUT [3.5mm Stereo Mini-jack] Mechanical Housing Metal Enclosure Color Black Dimensions Transmitter / Receiver:140mm (W)×65mm (D)×18mm (H) Weight Power Supply Transmitter: 235 g, Receiver: 239 g DC 24V/1A; Support bi-directional PoC function Power Consumption 9.6 W (max) Operating Temperature 0°C ~ 40°C / 32°F ~ 104°F Storage Temperature -20°C ~ 60°C / -4°F ~ 140°F Relative Humidity 20~90% RH (non-condensing) 3 / 8 5. Operation Controls and Functions 5.1 Transmitter Panel PWR EDID SERVICE DC 24V HDBT OUT ARC SPDIF OUT IR IN IR OUT No. Name Function Description 1 Power LED The red LED is on when the Transmitter is powered on. 2 EDID DIP switch Used for audio EDID setting (dial to COPY by default). COPY: Copy the EDID of the HDMI OUT port of the Receiver. STD: Default 1080P 2CH 3 SERVICE Firmware update port. 4 DC 24V DC 24V/1A power input port. Note that the extender supports the PoC function, which means that either Transmitter or Receiver is connected to a 24V/1A power supply; the other doesn't need a power supply. 5 HDBT OUT RJ45 connector for connecting the HDBT IN port of the Receiver with CAT5e/6 cable. Link Signal 6 Indicator (Green) Illuminating: Transmitter and Receiver are in good connection status. Flashing: Transmitter and Receiver are in poor connection status. Dark: The transmitter and Receiver are not connected. Data Signal Illuminating: HDMI signal with HDCP. 7 Indicator Flashing: HDMI signal without HDCP. (Orange) Dark: No HDMI signal. 8 HDMI IN HDMI signal input port. Connect to HDMI source device with HDMI cable. 4 / 8 No. Name Function Description 9 SPDIF OUT Optical fiber audio signal output port. 10 IR IN Connecting to the IR receiver cable, the IR receive signal will emit to the IR OUT port of the Receiver. 11 IR OUT Connect to IR blaster cable; the IR emit signal is from the IR IN port of the Receiver. 12 RS-232 3-pin Phoenix connector for RS-232 command transmission. The RS-232 command will pass through between the Transmitter and Receiver. 5.2 Receiver Panel PWR AUDIO SERVICE DC 24V HDBT IN ARC SPDIF IR IN IR OUT No. Name Function Description 1 Power LED The red LED is on when the Transmitter is powered on. When the HDMI IN port is connected to a signal source device with ARC function (e.g., Amplifier or Soundbar), the ARC function of the Extender is enabled: Switch to "HDMI ARC": the audio returned from the HDMI OUT port of the Receiver will be output through the HDMI IN 2 AUDIO DIP switch port and SPDIF OUT port of the Transmitter. Switch to "SPDIF IN": the audio returned from the SPDIF IN port of the Receiver will be output through the HDMI IN port and SPDIF OUT port of the Transmitter. When the HDMI IN port is connected to a standard signal source device, the ARC function of the Extender is disabled, a n d the audio from the SPDIF IN port of the Receiver will be 5 / 8 output through the SPDIF OUT port of the Transmitter. 6 / 8 No. Name Function Description 3 SERVICE Firmware update port. 4 DC 24V DC 24V/1A power input port. Note that the extender supports the PoC function, which means that either Transmitter or Receiver is connected to a 24V/1A power supply; the other doesn't need a power supply. 5 HDBT IN RJ45 connector for connecting the HDBT OUT port of Transmitter with CAT6/6a cable. Illuminating: Transmitter and Receiver are in good connection Link Signal status. 6 Indicator Flashing: Transmitter and Receiver are in poor connection (Green) status. Dark: The transmitter and Receiver are not connected. Data Signal Illuminate HDMI signal with HDCP. 7 Indicator Flash: HDMI signal without HDCP. (Orange) Dark: No HDMI signal. 8 HDMI OUT HDMI signal output port. Connect to HDMI display devices with HDMI cable. 9 SPDIF IN Optical fiber audio signal input port. 10 IR IN Connect to the IR receiver cable. The IR signal will send to the IR OUT port of the Transmitter. 11 IR OUT Connect to the IR blaster cable; the IR signal is from the IR IN port of the Transmitter. 12 RS-232 3-pin Phoenix connector for RS-232 command transmission. The RS-232 command will pass through between the Transmitter and Receiver. 7 / 8 5.3 IR Pin Definition IR Receiver and Blaster pin's definition is as below: IR RECEIVER IR BLASTER IR Blaster IR Receiver IR Blaster Signal Power NC IR Signal Power Grounding Note: When the angle between the IR receiver and the remote control is ± 45 °, the transmission distance is 0-5 meters; When the angle between the IR receiver and the remote control is ± 90 °, the transmission distance is 0-8 meters. 8 / 8 6. Application Example HDMI and HDMI High-Definition Multimedia interface and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. 9 / 8Adobe PDF Library 22.2.244