Help Center | EatonProduct Registration | Eaton
User Guide for TRIPP-LITE models including: N785-I01-SFP-D, Industrial Gigabit Copper to Fiber Media Converter
Extends a Gigabit Ethernet connection to an open SFP port. • Industrial housing withstands a wide range of operating temperatures from -40° to 75°C.
File Info : application/pdf, 8 Pages, 549.68KB
DocumentDocumentQuick Start Guide Industrial Gigabit Copper to Fiber Media Converter, RJ45/SFP Model: N785-I01-SFP-D Este manual está disponible en español en la página de Tripp Lite: tripplite.com/support Ce manuel est disponible en français sur le site Web de Tripp Lite : tripplite.com/support WARRANTY REGISTRATION Register your product today and be automatically entered to win an ISOBAR® surge protector in our monthly drawing! tripplite.com/warranty 1111 W. 35th Street, Chicago, IL 60609 USA · tripplite.com/support Copyright © 2021 Tripp Lite. All rights reserved. 1 Product Features · Extends a Gigabit Ethernet connection to an open SFP port · Industrial housing withstands a wide range of operating temperatures from -40° to 75°C · Provides ESD, RFI and surge protection · IP30 rating guarantees protection from tools and wires greater than 2.5 mm · Open SFP port works with a variety of SFP transceivers · LEDs indicate Ethernet connection and fiber link status · DIP switches control Local Loop Back testing (LLB), Link Fault Signaling (LFS), Reserve and FX100 functions · Link Fault Signaling (LFS) LED indicates when a cable has been severed or another cause for disruption has occurred · Line Loop Back (LLB) tests both both copper and fiber network connections · Auto MDI/MDI-X functionality removes the need for crossover cabling Package Contents · N785-I01-SFP-D Media Converter · Terminal Block (20~57VDC) · DIN Rail Kit · RJ45 Cap · SFP Cap · Quick Start Guide 2 Optional Accessories · N001-Series Cat5e Snagless Ethernet Cables · N201-Series Cat6 Snagless Ethernet Cables · N286-Series Transceivers Installation Notes: · The following installation instructions refer to an installation in which two media converters are used. · To avoid damage due to Electrostatic Discharge (ESD), it is recommended you handle the product while wearing an ESD wrist grounding strap or by touching a conductive surface (such as metal) to discharge any potential ESD prior to handling the product. 5 1 5 4 2 3 1 Connect the RJ45 port on the media converter to your network with a user-supplied Cat5e/6 cable. 2 Connect a transceiver to the open SFP port on the media converter. 3 Connect fiber cabling matching the transceiver type to the transceiver's port and to a second media converter with a matching transceiver. 4 Connect the RJ45 port on the second media converter to your network device (workstation, hub, switch, etc.) using a Cat5e/6 cable. 5 Connect 20~57VDC power properly to PWR and RPS (Terminal Block). Connect Alarm Relay output (ALM) to Alarm System. 3 Wiring the Redundant Power Inputs You can use "Terminal Block (PWR)" for primary power and "Terminal Block (RPS)" for secondary power and to be a redundant power input. The power input diagram is as follows: Insert the terminal block connector accessory, which includes "PWR" and "RPS," into the terminal block receptor. 4 LED Status Table LED PWR (Green) PWR (Green) Status ON OFF Description Primary power is on Primary power is off or experiencing failure RPS (Green) RPS (Green) ON OFF ALM (Red) ON ALM (Red) OFF RJ45 1000M (Green) 1000M (Green) ON OFF LNK/ACT (Green) ON (Blinking) LNK/ACT (Green) OFF Redundant (secondary) power is on Redundant (secondary) power is off or experiencing failure Alarm for following conditions: LFS (Link Fault Signaling) or power loss Normal operation, no LFS alarm or power loss Copper connection up to 1000 Mbps Copper connection speed at 10/100 Mbps Copper port correctly linked Copper port link failure SFP SFP (Green/Amber) ON ON (Blinking) OFF Ethernet link-up - Green: connection speed 1000 Mbps - Amber: connection speed 100 Mbps Activity (receiving or transmitting data) Port disconnected or link failed 5 DIP Switch Settings DIP Switch Settings Number Label Description 1 LLB ON: LLB is enabled OFF: LLB is disabled 2 LFS ON: LFS is enabled OFF: LFS is disabled 3 FX100 ON: Port 2 (SFP) speed at 100 Mbps OFF: Port 2 (SFP) speed at 1000 Mbps ALM (Alarm) DIP Switch Settings 4 PWR ON: Master power alarm reporting is enabled OFF: Master power alarm reporting is disabled 5 RPS ON: Redundant power alarm reporting is enabled OFF: Redundant power alarm reporting is disabled 6 LFS ON: Alarm for LFS issue is triggered OFF: Alarm LFS is disabled Link Fault Signaling (LFS) When the LFS DIP switch is enabled (#6), an alarm indicator will illuminate to indicate when a cable has been severed or when some other cause of disruption in service has occurred. The LFS function monitors both copper and fiber segments for a total service report. Line Loop Back Test (LLB) Set DIP Switch 1 to "ON" to activate the LLB diagnostic test function. Use the LLB function to check if the copper and fiber and fiber segments are connected properly. 6 Specifications Specification Network Speed Duplex Mode IEEE Standards Supported Power Consumption Power Supply Input Operating Temperature Storage Temperature Operating Humidity Storage Humidity Unit Dimensions (H x W x D) N785-I01-SFP-D 10/100/1000 Mbps (Gigabit) Auto MDI/MDI-X 802.3 10Base-T 802.3u 100Base-TX/FX 802.3ab 1000Base-T 802.3z 1000Base-SX/LX 802.3x Flow Control 802.3 Auto-Negotiation 6W 20~57VDC (Terminal Block) -40° to 167°F (-40° to 75°C) -40° to 185°F (-40° to 85°C) 10% to 95% RH, Non-Condensing 5% to 95% RH, Non-Condensing 2 x 4.7 x 4.1 in. / 5 x 12 x 10.4 cm 7 Warranty and Product Registration 2-Year Limited Warranty Seller warrants this product, if used in accordance with all applicable instructions, to be free from original defects in material and workmanship for a period of two (2) years from the date of initial purchase. If the product should prove defective in material or workmanship within that period, Seller will repair or replace the product, at its sole discretion. THIS WARRANTY DOES NOT APPLY TO NORMAL WEAR OR TO DAMAGE RESULTING FROM ACCIDENT, MISUSE, ABUSE OR NEGLECT. SELLER MAKES NO EXPRESS WARRANTIES OTHER THAN THE WARRANTY EXPRESSLY SET FORTH HEREIN. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, ALL IMPLIED WARRANTIES, INCLUDING ALL WARRANTIES OF MERCHANTABILITY OR FITNESS, ARE LIMITED IN DURATION TO THE WARRANTY PERIOD SET FORTH ABOVE; AND THIS WARRANTY EXPRESSLY EXCLUDES ALL INCIDENTAL AND CONSEQUENTIAL DAMAGES. (Some states do not allow limitations on how long an implied warranty lasts, and some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may have other rights which vary from jurisdiction to jurisdiction.) WARNING: The individual user should take care to determine prior to use whether this device is suitable, adequate or safe for the use intended. Since individual applications are subject to great variation, the manufacturer makes no representation or warranty as to the suitability or fitness of these devices for any specific application. Product Registration Visit tripplite.com/warranty today to register your new Tripp Lite product. You'll be automatically entered into a drawing for a chance to win a FREE Tripp Lite product!* *No purchase necessary. Void where prohibited. Some restrictions apply. See website for details. WEEE Compliance Information for Tripp Lite Customers and Recyclers (European Union) Under the Waste Electrical and Electronic Equipment (WEEE) Directive and implementing regulations, when customers buy new electrical and electronic equipment from Tripp Lite, they are entitled to: · Send old equipment for recycling on a one-for-one, like-for-like basis (this varies depending on the country) · Send the new equipment back for recycling when this ultimately becomes waste Use of this equipment in life support applications where failure of this equipment can reasonably be expected to cause the failure of the life support equipment or to significantly affect its safety or effectiveness is not recommended. Tripp Lite has a policy of continuous improvement. Specifications are subject to change without notice. Photos and illustrations may differ slightly from actual products. 1111 W. 35th Street, Chicago, IL 60609 USA · tripplite.com/support 8 21-08-176 933F8B_RevB