Instruction Manual for XKT models including: V1202, V1202 Mini Party Light BT Speaker, Mini Party Light BT Speaker, Party Light BT Speaker, Light BT Speaker, BT Speaker, Speaker
Dongguan Xinbaike Electronic Technology Co., Ltd V1202 MINI PARTY LIGHT BT SPEAKER 2BHTU-V1202 2BHTUV1202 v1202
532nm650nm LED RGB+UV 11 52MM 5V 3.7-4.2V 550MA 5000MA 400MV 15M ""BOdb V 5.2 V12 8W II 10°C-40°C 3-5 900 5-6 640 B IP20 S°C 10 Laser source: 532nm green laser/ 6 50nm red laser LED light source:Three in one RGB+UV purple light beads Scanning syPrecision mrhom Charging voltage:SV Working voltage:3.7-4.2V Workingcurrent;550llBattery capacity:5000MA Input sensitivity:400MV signal-to-noise rati80dB speeification:5M2M llBT version:V 5.2 Audio output power:SW BT receiving distanceSM Operating environment:10 ·c-40 ·c,optimal Charging time:Paper 5-6 hours working time:about 3-4 hours Product gross weight:900g Product net weight:640g Product colors:black,blue,pink,green & Thisproduct belongs toClasslIIB laserproducts,andit is important to avoidlaser irradiation on the eyes close to the light source,otherwise it may cause discomfort to the eyes. & Do not allowchildren to operate this product alone. u Please provide safety instructions before othe operate. ^ Thisproduct is suitable for indooruse,with a Ll protection level of IP20,suitable for dry environments. Please avoid exposure to moisture,corrosion, overheating,or undercooling, When used in dusty environments with temperatures below 5 °C,the laser may not work. Solemnly declare: This product is an atmosphere lighting fixture,not a lighting fixture. It is generally best used at night or in dimly lit places,with the best lighting effect within a distance of 10 meters. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter. Speaker: Radiation Exposure Statement The device has been evaluated to meet general RF exposure requirement in portable exposure condition without restriction. Micrphone Radiation Exposure Statement The device has been evaluated to meet general RF exposure requirement in portable exposure condition without restriction.Adobe Illustrator CC 23.0 (Windows) Adobe PDF library 15.00