Boult Audio

Pairing for the first time

1. Make sure the product is fully charged.
2. Press and hold the Multi-function Button for 5-6 seconds (approximately) to power-on the neckband. The neckband will indicate with [Red/Blue Flashing LED]. Now, the neckband is in pairing mode & ready to connect with your device.
3. Turn-on the Bluetooth on your device & scan until you see "Boult Audio Groove".
4. Click on "Boult Audio Groove" and pair your device with the neckband. Once paired, the neckband will indicate with [Blue Flashing LED]. Now, you can enjoy your music & calls.

Auto-pairing Mode (Re-pairing with your device)

1. Turn-on the Bluetooth on your device.
2. Press and hold the Multi-function Button for 3-4 seconds (approximately) to power-on the neckband.
3. The neckband will connect to your same device automatically. If not, connect to "Boult Audio Groove" in the Bluetooth settings on your device.

Product Introduction

The product diagram shows the layout of the Boult Audio ProBass Groove neckband. The top view displays a rectangular device with controls. Labeled components include: 'USB Charging Port' (top left), 'Volume Down / Previous Track' button (left), 'LED indicator' (top right), 'Multi-function Button' (center), and 'Volume Up / Next Track' button (right). A side view shows the 'USB Charging Port' on one side and the 'Microphone' on the other.

Charging the neckband

• Use only 5V/1A USB charger to charge this product.
• This product or the Bluetooth functions cannot/should not be used during charging.
• This neckband will indicate with [Quick Red Flashing LED] when the neckband's battery needs to be charged.
• [Solid Red LED] will indicate on the neckband while charging.
• [Solid Blue LED] will indicate on the neckband once charging is complete.

Functions

• Voice assistance

  Click on the Multi-function Button for 2 seconds to activate the Google Assistant/Siri. Google Assistant/Siri will pop up on your phone screen.

• Play/Pause music

  Single click on the Multi-function Button to play/pause the music.

• Answer/End/Reject calls

  Single click on the Multi-function Button to answer/end a call. Press & hold the Multi-function Button for 2 seconds to reject the incoming call.

• Redialing the last call

  Double click on the Multi-function Button to redial the last phone number on your mobile phones dialing list.

• Change music track

  Press & hold the Volume Down / Previous Track button for one second to change the music track to the previous track. Press & hold the Volume Up / Next Track button for one second to change the music track to the next track.

• Increase/Decrease volume

  Single click on the Volume Down / Previous Track button to decrease the volume. Single click on the Volume Up / Next Track button to increase the volume.

• Switch ON/OFF

  Press and hold the Multi-function Button for 3-4 seconds (approximately) to power-on the neckband. [Blue Flashing LED] will indicate on the neckband when powered-on. Press and hold the Multi-function Button for 3-4 seconds (approximately) to power-off the neckband. [Red LED] light will flash and the neckband will get switched-off.

Safety Precautions

Please make sure to follow the instructions provided in this manual for your safety and to extend the life of the neckband.

• Please keep this device away from extreme heat, humidity or corrosive environment.
• Please don't over-charge the neckband as it will decrease the service life of battery.
• Please use only a good quality phone charger (5V/1A) or USB charging port to charge the neckband.
• This product or the Bluetooth function should not be used during charging.