User Manual for BIOGENESIS models including: BGCO2WHEKG50SIS80, 14504, Ral 3000 50 Kg Carbon Dioxide Wheeled Fire Extinguisher, 50 Kg Carbon Dioxide Wheeled Fire Extinguisher, Carbon Dioxide Wheeled Fire Extinguisher, Wheeled Fire Extinguisher, Fire Extinguisher
Use and Maintenance User Manual. APPROVED/CERTIFIED FIRE EXTINGUISHER: • CYLINDER. Alloy steel, external powder coating, color Red Ral 3000.
50 Kg carbon dioxide wheeled fire extinguisher, temperature range from -30°C to 60°C, manufactured in accordance to UNI EN 1866-1 (D.M. 6.3.92), ...
pirms 4 dienām — Wheeled Fire Extinguisher, 50 Kg Carbon Dioxide. Biogenesis S.r.l. www.bio-genesis.it. Use and Maintenance User Manual. APPROVED/CERTIFIED FIRE EXTINGUISHER ...
Use and Maintenance User Manual Biogenesis S.r.l. www.bio-genesis.it Wheeled Fire Extinguisher, 50 Kg Carbon Dioxide · CYLINDER Alloy steel, external powder coating, color Red Ral 3000. · EXTINGUISHING AGENT Carbon Dioxide 99,99 % (CO2). · VALVE W 28.8, brass body, handwheel red painting, with protection for valve. · USE B fire rating (flammable liquids). · BRACKET Chassis on wheels, red painting Ral 3000. REPRODUCTION IS PROHIBITED Note: image is for illustrative purpose only, the product purchased can has some difference 50 Kg carbon dioxide wheeled fire extinguisher, temperature range from -30°C to +60°C, manufactured in accordance to UNI EN 1866-1 (D.M. 6.3.92), certified according to the directive for pressure equipment PED 2014/68/EU. Quality Product Suitable for use certification guaranteed by Bureau on fire involving electrical voltages uVpertiota1s.0It0a0liaV., at a minimum distance of 1 mt. APPROVED/CERTIFIED FIRE EXTINGUISHER: D.M. 06 Marzo 1992 For certified MED 2014/90/EU version: cod. 14504 FIRE RATING : B 233 Wheeled Fire Extinguisher, 50 Kg Carbon Dioxide TECHNICAL SPECIFICATIONS FIRE RATING EXTINGUISHING AGENT TEMPERATURE RANGE NOMINAL CHARGE FULL WEIGHT DIMENSIONS DISCHARGE TIME 233 B Carbon Dioxide 99,99 % (CO2) -30°C / +60°C 50 Kg ~ 145 Kg Height 1270 +/-5 mm ; Width 1425 +/-5 mm Depth 580 +/-5 mm ~ 48,9 seconds MODALITY OF USE 1) UNROLL THE HOSE 3) OPEN THE VALVE 2) REMOVE SAFETY PIN Follow the instructions present on the marking label. 4) HOLD THE NOZZLE, MOVE THE LEVER AND AIM THE JET AT BASE OF FIRE ATTENTION: Do not direct the jet The fire extinguisher can be used oant pfiereopinlev.oIlfvyinogu'erleecdtirsipceanl vsionlgtaignecslouspetsop1a.c0e0s0, then V, at ventilate the a distance of room. 1 meter. INSTALLATION AND COMMISSIONING The installation of the fire extinguisher must be performed according to the rules in force. The fire extinguisher have to be installed in areas with large spaces and free from obstacles. The fire extinguisher must be free of obstructions and marked by an appropriate identifying label. It is recommended to install it in a dry place, protected from the atmospheric agents. It is recommended the installation of water-based fire extinguishers for close spaces. The commissioning of the fire extinguisher for the protection of the area must be carried out by qualified personnel according to the rule in force within 6 months from the date of production and/or placing on the market, reported in the declaration of conformity released by the producer. MAINTENANCE PERIODS FOR EFFICIENCY GUARANTEES The maintaning of the product efficiency have to be carried out from the responsible person. It is recommended a visual check of the efficiency state every three months since the commissioning time apart if there are different dispositions. It is advisable to : verify that the fire extinguisher would be in a correct position, safe and stable, free from impediment for the use; identify the fire extinguisher with an appropriate identification sign; make sure of its structural integrity and that is free from any damage; check that the original documentations is available. Any restoration operations and instrumental checking have to be realized exclusively by qualified personnel who possess the necessary documentations to mantain the constancy of the product performance. Any tampering or intromission by unauthorized personnel voids the product warranty. REPRODUCTION IS PROHIBITEDAdobe PDF Library 17.0 Adobe InDesign 18.1 (Windows)