Aiwa Prodigy Clear Plus Noise Cancelling Earphones

What's Included

The package contains:

• AI1202 Earphones and Charging Case
• Eartips (Small, Medium, Large)
• USB-C Cable

A Closer Look

Charging Case

Front View: Features an LED Indicator.

Rear View: Features an Earbud Charge Status Button.

Bottom: Features a USB-C charging port.

Earphones

Each earphone features:

• Eartips
• Microphone (ANC)
• Microphone (Voice)

Charging

First Use

Before first use, remove the insulation film from the charging pads on both earbuds. Place them in the case; they will start to charge. Simultaneously, charge the case fully. This process can take up to 3 hours.

Charging the Earbuds

Place the earbuds in the case, ensuring the charging contacts align. Fully charging the earbuds from flat takes approximately 30 minutes.

The case indicator LED behavior:

• Charging: LED turns solid Green.
• Charged: LED turns Off.

When the case is opened or the rear button is pressed, the LED will light up green for 8 seconds, then either turn off if charged or stay on if charging.

Charging the Case

Connect one end of the included USB-C cable to the Type-C port on the case. Plug the other end into a suitable 5V/1A USB charging adapter. Charging the case fully from flat takes approximately 3 hours.

The case indicator LED behavior:

• Charging: Indicator is Amber & Flashing.
• Charging Complete: Indicator is Amber.

Powering On/Off

Automatic: When first using the earphones, place them in the case. Remove them to automatically turn them on. Place them back into the case and close the lid to automatically turn them off.

Manual: You can also turn the earbuds on/off by holding the touch button for 8 seconds.

Bluetooth Pairing

When removed from the case, the earbuds will find each other and pair together (TWS pairing). This may take up to 15 seconds on first use. Once paired together, they are ready to pair with your phone.

To pair with your phone:

1. Go to your phone's Bluetooth settings menu.
2. Ensure Bluetooth is turned on.
3. Connect to the device listed as "AIWA Prodigy Clear Plus."

Troubleshooting

If the earbuds do not pair together, you can reset the TWS pairing:

1. 'Forget' the earbuds in your phone's Bluetooth Settings.
2. Place them back in the case (which must be charged).
3. Take them out and wait at least 15 seconds for them to pair together.
4. Only once they have paired together, pair them to your phone.

Using Your Earphones

Left Earphone Controls:

• Decrease Volume: Press
• Previous Track: Double Press
• Voice Assistant: Press and Hold for 2-3 Seconds
• Answer Call: Press
• Low Latency ON/Off: Triple Press

Right Earphone Controls:

• Increase Volume: Press
• Next Track: Double Press
• Play/Pause: Press and Hold for 2-3 Seconds
• ANC ON/Ambient ON/ Sound Modes OFF: Triple Press

Features:

ANC (Active Noise Canceling)

ANC actively cancels noise around you, allowing you to hear more clearly with less distraction.

Ambient Mode

Ambient Mode turns off ANC and amplifies surrounding sounds. This is best for situations where you want to hear speech, traffic noise, or other ambient sounds.

Clear Calling

The Clear Calling feature uses two microphones to cancel noise pickup in your microphone channel during calls. Clear calling is always enabled when a call is made and can be used with ANC.

Low Latency Mode

This mode reduces the latency (time delay) inherent in Bluetooth connections, providing optimal lip-sync performance for movies and fast audio response for mobile gaming.

Specifications

• Bluetooth Version: 5.3
• Battery Capacity (Earphones): 40 mAH
• Play Time (ANC ON): Up to 4.5 hours at 50% volume
• Play Time (ANC OFF): Up to 7 hours at 50% volume
• Charge Time (Earphones): ~30 mins
• Charging Case Charge Time (via cable): ~3 hours
• Fast Charging: 5 minutes provides 50 mins playtime
• Charges in Case: 3
• Charging Port: USB-C

Safety Precautions

When using your earphones, basic safety precautions should always be followed, including:

1. READ ALL INSTRUCTIONS BEFORE USING YOUR EARPHONES AND CHARGING CASE.
2. Do not use the product near water. Do not put on wet surfaces.
3. Only clean using a clean cloth.
4. Do not allow children to play with this product. It contains small pieces that can be a choking hazard. Parental supervision is advised.
5. Do not expose this product to excessive heat or fire.
6. Do not expose this product to temperatures above 100°F (38°C). Keep out of direct sunlight.
7. Do not attempt to repair this product yourself. Contact a qualified service center if the product is in need of service.
8. Do not drop, crush, or expose this product to excessive physical force.
9. This product is not intended for commercial use.
10. When charging, keep all charging cables well ventilated. Do not keep your charging cable in contact with flammable materials such as bedding, linens, or synthetic fabrics.

Maintenance and Care

• Use a soft cloth or paper towel to clean your earphones. Never use harsh chemicals or detergents. Ensure earphones are dry before charging.
• When not in use, store earphones in a cool, dry place.
• Never tug or yank on a cable while it is connected to the charging case. Connect and disconnect cables carefully.
• Never expose earphones to high temperatures or extreme cold.
• Recycle or dispose of your earphones properly according to local laws and regulations. Contact local recycling facilities and/or the manufacturer for further information.

FCC Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Warranty

This warranty covers the original consumer purchaser only and is not transferable.

This warranty covers products that fail to function properly UNDER NORMAL USAGE, due to defects in material or workmanship. Your product will be repaired or replaced at no charge for parts or labor for a period of one year.

What Is Not Covered By Warranty

Damages or malfunctions not resulting from defects in material or workmanship, and damages or malfunctions from other than normal use, including but not limited to, repair by unauthorized parties, tampering, modification, or accident.

To Obtain Warranty Service and Troubleshooting Information:

Call (877) 397-8200 or visit our website at www.aiwa.co.

To receive warranty service, along with the name and address of an authorized product service center, the original consumer purchaser must contact Aiwa for problem determination and service procedures. Proof of purchase in the form of a bill of sale or receipted invoice, evidencing that the product is within the applicable warranty period(s), MUST be presented to obtain the requested service. It is your responsibility to properly package and send any defective products along with a dated copy of proof of purchase, a written explanation of the problem, and a valid return address of the authorized service center at your expense. Do not include any other items or accessories with the defective product. Any products received by the authorized service center that are not covered by warranty will be returned unrepaired.