User Manual for EDUPLINK models including: M2 Series, Waterproof Wireless Speaker, M2 Series Waterproof Wireless Speaker
M2 User Manual (PDF) EDUPLINK EDUPLINK EDUPLINK,Waterproof,Portable,Bluetooth,Speaker,12,Hours,of,Play,Wireless,Streaming,Blue,B096Z42QF3,B089M35RNP,B085TKFX61,B089LVWBJJ,B092M7L6YS
M2 User Manual (PDF) EDUPLINK EDUPLINK EDUPLINK,Waterproof,Durable,Portable,Bluetooth,Speakers,Small,Size,but,Loud,Volume,Up,to,12,Hours,of,Play,for,Shower,Beach,Pool,Black,B096Z42QF3,B085TKFX61,B089LVWBJJ,B092M7L6YS
EDUPLINK Bluetooth Speaker, Portable Wireless Speakers
. -Y8 NN
2M Series:
WATERPROOF WIRELESS SPEAKER
FEATURES:
Wireless 5.0 TWS interconnection Colorful Party Light TF Card & AUX Audio Mini Portable Design
INTRODUCTION
Thank you for purchasing the M2 Wireless Speaker. We advise you to read, follow and keep the following instructions in order to be able to correctly set up the speaker and enjoy all its features to the fullest.
PACKAGE CONTENT
1*M2 Wireless Speaker 1*Type-c charging cable 1*3.5mm AUX cable 1*User Mannual
SPECIFICATIONS
Model Name: M2 Speaker: 52mm 4 Battery: 1800mAh 3.7V Output: 5W Input: 5V 1A Weight: 224g Transmission Range: 10m/33ft
KEY FUNCTION DEFINITION
1. Power button
Long press on / off
Short press to pause / play
2. Wireless / telephone
Short press (1) to switch mode (2) to answer / end the call.
Long press to disconnect the wireless connection.
3. "-" button
Short press to decrease the volume.
Long press the previous song button
4. "+" button
Short press to increase the volume
Long press to play the next track
5. TWS button
Press and hold start or cancel TWS interconnection.
Click to turn party lights on or off.
Double click to clear TWS pairing.
6.TF card slot
7.External Audio Connection
8. Type-c charging
9. Charging light / Bluetooth indicator/Low power indicator
10. TWS indicator
OPERATIONS
Pair the speaker with your smartphone
1. Long press the " " power button to turn it on or off. 2. After turning it on, and pair "M2" under Wireless. If it's connected successfully, you will hear the prompt tone that" Device is paired".
Pair the speaker with your computer
1. Turn on the M2 Wireless Speaker. 2. Turn on the Wireless on your computer, then pair "M2".
Have connecting problem?
Have connecting problem? 1. Make sure that your device is within 1 meter from the speaker. 2. Clear the Wireless pairing list on your device. 3. Make sure the speaker has entered the "Wireless Mode" rather than "AUX in Mode"or "TF card Mode". 4. Try to reset your device. 5. Make sure your device is set up correctly. 6. Try the pairing steps above again.
Auto-off Timer
The auto-off timer conserves the battery when the speaker is operating on battery power. In Wireless mode, the speaker switches off automatically when the Wireless device has disconnected and buttons have not been pressed for 20 minutes. In AUX in mode and TF card mode, the speaker switches off when audio has stopped and buttons have not been pressed for 20 minutes.
AUX in Mode
Please connect one end of the 3.5mm audio cable to the headphone outpu port of the mobile phone / computer and the other end to the audio, the speaker will switch mode automatically with a prompt tone "AUX in mode", then you can play music. Note: In AUX-in modethe bluetooth speaker cannot answer the phone call.
Play music via TF card Mode
1. Card capacity: 32G or below. 2. Support files: mp3.
Playing Time
Full light on Full volume 3-4 hours, 70% volume 5-6 hours, 50% volume 7-8hours, 30% volume 8-10 hours. light off Full volume 4-5 hours, 70% volume 6-7 hours, 50% volume 8-9hours, 30% volume 10-12 hours.
*Note: playback time varies with volume and audio content.
Hands-free Calling
When the Wireless is connected successfully and you makecalls with phone, slightly tap"
"to
answer incoming call, and long press to reject the call. Without Obstacle, a single Wireless
connection distance > 33ft (10m).
Party Light Control / TWS Connect
1. Tap slightly the " " button can turn on / off the colorful party lights. When device turned
on, the default setting is toswitch on the random RGB colorful party lights, the beat will change
with the voice volume and beat of the music.
The party light do not changed by the beat?
Please turn up the volume on the speaker and your device.
2. TWS wireless stereo: Press and hold the " " button on one of the speakers until the two
white lights on the " " button are on
You just need to pair one Wireless to speakers. If connected successfully, the two will
automatically switch into left and right channels.
(Note: If one of them doesn't work, please check if it has enter Wireless mode by tapping slightly
"
" and then pair again ) TWS connection distance> 16ft (5M).
Note: This function requires our two speakers, and both are turned on in Wireless mode. No
Wireless connection to any device before. When the TWS is connected, long press one of the
product's "
" button can cancel.
Charge the speaker
1.Audio voice prompt "Out of battery",and the red light of the charging prompt light flashes. Please charge speaker as quickly as possible.
2. While charging the speaker, please do not use the AUX cable to connect computer at the same time.
3. Charging time: About 4.5 hours to fully charge the speaker.
Note: While charging, it is normal that the speaker gets hot. Please don't worry.
TROUBLE SHOOTING Problems
No power Battery cannot be charged
No sound
No sound when in aux-in mode Poor sound quality/buzzing sound
Solutions
Battery may be in protection mode or drained. Plug in and charge the speaker.
1.Make sure you are using a USB cable from a qualified manufacturer. 2.Please use a adapter to charge the speaker, do not use computer USB port or other. 3.Try to use a different USB cable.
1.Turn off the Wireless on your device. Remove the speaker from the Wireless list and then try to pair your device again. 2.Increase the volume on the speaker and your device. 3.Make sure that you are using the correct device. 4.Use a different music source. 5.Try to pair a different device.
1.Make sure the device connected to your speaker is turned on and playing music. 2.Increase the volume on the speaker and your device. 3.Make sure the device is properly connected. 4.Try to use a different cable. 5.Try to connect a different device.
1.Try to use different music sources. 2.Increse the volume on speaker and device. 3.Check the device's audio settings. 4.Charge the speaker until fully charged.
WARNINGS
Do NOT drop, hit or shake the device. Do NOT disassemble, repair or modify the speaker. Do NOT cleaning stuff that contains benzene, solvents or alcohol. Do NOT expose the speaker to excessive heat or direct sunlight for prolonged periods of time.
HOW TO EMAIL QUICKLY?
Please scan QR code and email to us .
eduplink_warranty@126.com
eduplink_support@126.com
V. 2 . 0 . 2
Adobe PDF library 15.00 Adobe Illustrator(R) 24.0