User Manual for EJEAS models including: MS4 Mesh Group Intercom System, Mesh Group Intercom System, Group Intercom System, Intercom System, System
User manual EJEAS & Vnetphone bluetooth intercom headset
Product Manuals – Ejeas India
File Info : application/pdf, 16 Pages, 1.28MB
DocumentDocumentMore languages
MS4/MS6/MS8
User Manuals
Mesh group intercom system
Product Details
Intercom Button
Volume -
Phone/
Power Button
Volume +
MESH Intercom
Bluetooth Intercom
Bluetooth Music Auto phone receiving
Voice Assistant
FM Radio
Support EUC Remote
Support Mobile App
Product Model
Sport Mode
MS4 Off-road Intercom
4 riders supported, the max distance between 2 riders is 1.8km in the open area.The max distance is 0.9km when in the traffic. The max distance of 4 riders connection is about 1.5-3km.
Sport Mode
MS6 Off-road Intercom
6 riders supported, the max distance between 2 riders is 1.8km in the open area.The max distance is 0.9km when in the traffic. The max distance of 6 riders connection is about 2.5-5km.
Sport Mode
MS8 Off-road Intercom LED Lights
8 riders supported, the max distance between 2 riders is 1.8km in the open area.The max distance is 0.9km when in the traffic. The max distance of 8 riders connection is about 3.5-7km
Blue
Red
Green
Product Operation
Operation Diagram
1s
3s
5s
Click
Double-click Long-press Long press Long press for 3 seconds for 5 seconds
Basic Operation Power ON/OFF Please charge it before using
1s
1s
ON
Long press <Phone/Power Button > for 1 second, until the blue light flashes with a voice prompt.
Slow flashing blue light
OFF
Long press <Phone/Power Button > + < Intercom Button >, until the voice prompt says "Power off"
Indicator light off
Low Battery Indication
Charging Indication
The red light flashes twice with a voice prompt "Low Battery"
The red light is always on when using USB charging.
Mesh Intercom
When entering the Mesh network, Bluetooth music can be played at the same time,when someone speaks, it will
automatically switch to Mesh intercom, no one speaks after a period of timewill automatically playback the music.
Sport mode
Mesh intercom is a mesh network intercom. (Communication frequency 470-488MHz). On account of large number of participants and unrestricted location, people are able to move at will within the effective range. It is not only superior to the traditional Bluetooth chain intercom, but has a longer transmission distance and better anti-interference ability. The product has 2 mesh intercom modes: sport mode and listening mode.
All intercoms first go into sport mode pairing Long press the <Intercom Button> (approx. 5s) until the voice prompt "Sport Mesh Pairing" is heard.The red light flashes alternately with the green light.
Red light and green light flashing alternately
Creator
Take one of the units as the pairing server and click the <Intercom Button> , a beep is heard and both red light and green light flash alternately twice.
Red light and green light flashing alternately
Wait for a moment and hear the message "pairing successful", which means that the pairing has been successful.
You will then hear all intercoms indication {channel n, xxx.x megahertz}, at which point pairing is complete and you can then talk to each other and hear each other's voices.
Intercom Reconnection
Turn off Mesh Intercom
Press the <Intercom Buttonprompt "Mesh network movement mode".Wait a moment, then prompt "channel n,xxx.megahertz" and you are ready to talk.
To switch off the Mesh Intercom, click <Intercom Button> (for approx. 1s) and the message "Mesh Close" will be displayed.
4
Listening Mode
To be a listening role on a sports team, provided that other intercoms have been paired to form a team via sports mode. Pairing then follows.
Listener
1.Take the intercom to be paired, enter listening mode for pairing,long press <Messenger Button> + <Minus Button> (for about 5s), "Listen Mesh Pairing" will be displayed and both the red light and green light will flash alternately.
Red light and green light flashing alternately
Creator
Take an intercom that has been paired in sport mode as a pairing server, enter listening mode pairing,long press<Intercom Button> + <Volume -> (about 5s), the prompt will be "Listen Mesh Pairing", then press <Intercom Button> , you will hear a beep and the red light and green light will flash alternately.
Red light and green light flashing alternately
Wait for a moment and hear the message "pairing successful", which means that the pairing has been successful.
Wait a few moments and hear all the intercoms say "channel n, xxx.x megahertz". At this point you can talk to each other and hear each other's voices.
Intercom Channel Switching
5 channels in total, short press <Intercom Button> + < plus Button>/<Minus Button> to switch channels backwards or forwards. Note that the whole team must be on the same channel to talk to each other.
"{Channel n, xxx.x megahertz}
Intercom Connection
Turn off Mesh Intercom
Short press <intercom key>, prompt {net network movement mode}, wait for a moment and prompt {channel n,xxx megahertz Hz}, you can talk to each other. If this group is joined as a listening role, you will be prompted {Listen mode}.
5
To switch off the Mesh intercom, press the <Intercom Button> (approx.1s)
Intercom Reconnect
Microphone Mute
If the intercom mode is not turned off and the devices are turned off directly, the devices will automatically resume the intercom mode when they are turned on next time.
Click on <intercom Button> to mute the microphone.Microphone Mute" is displayed.Click on the <intercom Button> again to unmute the microphone.The prompt is "Microphone Unmute".
Sport Mode Compatibility Notes Group Member Role Compatibility
Creator
Participants
MS4
MS4
MS6
MS6
MS8
Listening For Role Compatibility Creator
MS8 Participants
MS4
MS4
MS6
MS6
MS8
MS8 6
Bluetooth Intercom How To Pair With The Device
After switching on the phone, press and hold <Phone/Power Button> + <Volume +> (about 5s) until the red and blue lights flash alternately, and the pairing voice prompts "Intercom Pairing". Wait for connection to other intercoms.
Red light and blue light flashing alternately
The other intercom enters the pairing state using the same operation. After the two intercoms discover each other, one of them will initiate the pairing connection.
The connection is successful and the intercom begins.
Compatible With Older Model Pairings
Simultaneously press and hold <Phone/Power Button> + <Volume +> + <Intercom Button> for approx. 5 seconds to start pairing (red and blue lights flash alternately).
Red light and blue light flashing alternately
B
FM A
or
For older models (V6/V4) follow the instructions to enter the search Wait for successful pairing.
7
Pairing headset or other branded Bluetooth intercoms search Note: This feature is not guaranteed to be compatible with all Bluetooth headsets or
Bluetooth intercoms on the market.
Long press <phone/power button> + <Volume +> (approx. 5s) until the red and blue lights flash alternately and the prompt "Intercom pairing" is displayed.
Red light and blue light flashing alternately "Intercom Pairing"
HFP-enabled intercoms
Others
Click again on <Phone/Power Button> + <Volume +>. The voice prompts "Intercom Searching". The red and blue lights flash alternately.
Red light and blue light flashing alternately "Intercom Searching"
At this point the intercom is searching for other intercoms in the pairing state, and when it finds another intercom, it The pairing connection is initiated.
Successful pairing
Intercom Connection
Intercom Disconnection
Rapidly flashing blue light
8
Mobile Phone Pairing
This intercom supports connection to mobile phones for playing songs and making calls, and waking up voice assistants. Up to 2 mobile phones can be connected at the same time.
After switching on the phone, press and hold (approx. 5s) the <phone/power button> until the red and blue lights flash alternately and the voice prompt "Phone Pairing".
Red light and blue light flashing alternately
MS4/6/8
The phone searches for the device named "MS4/6/8" using Bluetooth. Click on it to pair and connect.
Connection Blue light slow flashing twice successful
Current battery level is displayed on the phone's Bluetooth icon Mobile phone HFP connection required
Bluetooth reconnection with mobile phones
After switching on, it automatically connects back to the last connected phone Bluetooth. When there is no connection, click on the back to the last connected phone Bluetooth.
Mobile Control
Answering The Phone
When a call comes in, click on the<phone/power button>
9
Reject The Phone End The Phone
Last Call Recall
Cancel Recall
When the call comes in, While on a call, Click on On standby or with music, Redial in progress,
Press and hold <phone/ the <phone/power
Quick double click on<
Click on <phone/power key>
power button> for about 2s button>
phone/power button>
Telephone Priority Interrupts Bluetooth music, FM radio and intercom when a call comes in, resumes after ending up.
Music FM Intercom
Interruptions
Incoming calls
End
Music FM Intercom Recovery
Voice Assistant When in standby/playing music, press and hold <phone/power button>, requires mobile phone support.
Press and hold <phone/power button> for 1 second.Turn on the voice assistant.
Voice Assistants
"Open QQ Music" "Music on a song"
"Music next" "Call EJEAS" "Open navigation"
Music Control
Playback Pausing
Previous Song
Next Song
Music Playing
Volume -
10
Volume +
RadioFM FM on/off
The device can search and play the radio stations automatically. FM can be used when talking to each other, and we can listen to the radio while talking.
Press and hold <plus key> + <minus key> (approx. 1s) The prompt " FM Radio ".
Press and hold <plus key> + <minus key> (approx. 1s) The prompt " FM Radio Off ".
Switching Channels
Frequency -
Frequency +
Volume Adjustment FM with a total of 7 volume levels
When using FM alone
VolumeWhen FM + Intercom
Volume+
Volume-
11
Volume+
Handle EUC (optional) Key Descriptions
Pushbuttons Actions
Function
Short press
Volume +
FM Button C Button B Button A Button
Volume + Long press
Volume -
Double click Short press
Long press
Double click
Short press
Phone Button Long press
Next song when music is playing. Tuning up when FM is on
FM volume +
Volume -
Previous song when music is playing. Tuning down when FM is on
FM Volume -
Answer the phone when it comes in On call, hang up Music play/pause When no mobile phone is connected Connect the last connected phone
Reject calls when they come in. Voice assistant
Volume + Phone Button
Volume -
Pushbuttons
Actions
Function
A Button
Double click Short press Long press
Last call Replay
Turn on Mesh Intercom Sport mode/ Listen mode
Turn off Mesh Intercom
Double click
Short press
Short press
Initiate Bluetooth intercom connection
C Button Long press Double click
Disconnect the intercom
FM Button Short press
Turn FM on/off
B Button Long press Double click
Volume - + Super FM Button Long Press
Clear handle pairing records
12
EUC Pairing
Press and hold the <Phone/Power button> + <Volume -> for about 5s to enter the pairing mode, the voice prompts "Remote Control Pairing", the red and blue lights flash alternately, if the pairing is not successful within 2 minutes, exit the pairing.
Red light and blue light flashing alternately
Press and hold the FM+Volume - button on the handle for about 5s to clear the record until the red and blue lights come on.
Until the red and blue lights come on
Anyone
EUC Click any key.
Pairing Successful No successful pairing within 2 minutes, exit the pairing
Handle Operation
Mesh intercom reconnect/disconnect and mobile phone control are the same as on the machine.
Bluetooth Intercom Connection
Bluetooth Intercom Disconnection
FM on/off
FM C B A
1s
FM C
B A
FM C B
13
Restore Default Settings
Press and hold <Phone/Power key> + <Volume +> + <Volume -> for about 5s, the voice prompts "Restore Default Settings" to delete the pairing record, and then automatically reboot the phone.
Firmware Upgrades
Connect the product to the PC using USB. Download and open the "EJEAS Upgrade.exe" upgrade software. Click on the "Upgrade"
button to start the upgrade and wait for the upgrade to complete.
14
Mobile App
First time users download and install SafeRiding Mobile App.
Press and hold (approx. 5s) <phone/on button> until the red and blue lights flash alternately to enter phone pairing.
Red light and blue light flashing alternately
Open the APP, click on the Bluetooth icon in the top right corner, the interface shows the name of the intercom device searched, select the intercom device to be connected, click to connect. (IOS system need to enter the phone pairing again, in the system settings->Bluetooth, connect audio Bluetooth)
The next time you use the app, open it, click on the Bluetooth icon in the top right corner and click to select Intercom for connection from the paired devices
APP provides intercom group, music control, FM control, switch off, check authenticity and other functions. 15
Adobe Illustrator 25.3 (Windows) iLovePDF