Eufy Security Floodlight Camera Quick Start Guide
Model: T8420
Document Version: 51005001400 V02
Table of Contents
What's in the Box
The box contains the following items:
- Floodlight Camera (T8420)
- Power Cord (Connected to the unit)
- Mounting Plate
- Installation Hook
- Central Screw
- Central Screw Cap
- Plate Screws
Important Notes:
- Install Floodlight Camera to the junction box outdoors (requires a pre-installed junction box and wires).
- Ensure strong Wi-Fi signal strength at the installation location for video streaming.
- ⚠️ To avoid risk of shock, injury, or death, always be cautious when working with electricity. Hire a professional electrician if you are uncomfortable with electrical wiring.
Power On the Floodlight Camera Indoors
- Connect the Floodlight Camera to a power source. Wait for 1 minute or until the LED indicator blinks red.
Get the Eufy Security App and Setup the Camera
Download the Eufy Security app from the App Store (iOS) or Google Play (Android).
Log in or sign up for a Eufy Security account, then follow the on-screen instructions to complete the setup.
⚠️ To avoid risk of shock, injury, or death, always be cautious when working with electricity.
Tip: Make sure you can livestream video from the Floodlight Camera before mounting it outdoors.
Mount Floodlight Camera Outdoors
Step 1: Unplug Floodlight Camera.
Unscrew the power cord; wire nuts will be used later. The power cord is not required for mounting.
Step 3: Shut down the circuit breaker.
Shut down the circuit breaker in your house. Test the lights to ensure the electricity is off.
⚠️ To avoid risk of shock, injury, or death, always be cautious when working with electricity.
Step 4: Remove old fixture and install mounting plate.
Remove the old Floodlight from the junction box and install the mounting plate to the junction box. The junction box and existing electrical wires are required for installation.
Note: The concaved side of the mounting plate must face outwards.
Step 5: Select installation method.
You can hang the Floodlight Camera upside down or install it vertically on the wall. Choose the method that best suits your junction box position.
- Wall Mount
- Eave Mount
⚠️ To avoid risk of shock, injury, or death, always be cautious when working with electricity. Hire a professional electrician if you are uncomfortable with electrical wiring.
Step 6: Hang Floodlight Camera.
Hang the Floodlight Camera on the junction box using the provided hook.
For upside-down installation, turn the camera down to the end when it's placed vertically, then turn the camera 180° clockwise.
⚠️ To avoid risk of shock, injury, or death, always be cautious when working with electricity. Hire a professional electrician if you are uncomfortable with electrical wiring.
Step 7: Secure the camera.
Insert the central screw through the center of the Floodlight Camera and screw it tightly. Use the central screw cap to cover the central screw to prevent rusting.
Step 8: Adjust camera angle.
After installation, turn the camera knobs to adjust the camera to your desired angle.
Step 9: Power on and check status.
- Switch on the main circuit breaker.
- Check if the LED indicator is solid white to confirm the Floodlight Camera is operating.
❗ If your Floodlight Camera is not powered on, switch off the circuit breaker before checking the wiring.
⚠️ To avoid risk of shock, injury, or death, always be cautious when working with electricity. Hire a professional electrician if you are uncomfortable with electrical wiring.
Troubleshooting:
- If the camera keeps blinking red, it indicates no internet connection. Ensure strong Wi-Fi signal. Consider moving your router closer or using a Wi-Fi range extender.
- For further troubleshooting, check the Help section in the Eufy Security app.
- Refer to the app for LED indicator status light meanings.
Safety
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy. If not installed and used according to instructions, it may cause harmful interference to radio communications. There is no guarantee that interference will not occur in a particular installation. If this equipment causes harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by:
- Reorienting or relocating the receiving antenna.
- Increasing the separation between the equipment and receiver.
- Connecting the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consulting the dealer or an experienced radio/TV technician for help.
FCC Radio Frequency Exposure Statement
The device has been evaluated to meet general RF exposure requirements. The device can be used in fixed/mobile exposure conditions. The minimum separation distance is 20cm.
Notice: Shielded cables must be used for all connections to other computing devices to maintain compliance with FCC regulations.
Importer Information:
- Company Name: POWER MOBILE LIFE, LLC
- Address: 400 108th Ave NE Ste 400, Bellevue, WA 98004-5541
- Telephone: 1-206-383-8247
CE Declaration of Conformity
Anker Innovations Limited declares that this device complies with the essential requirements and other relevant provisions of Directive 2014/53/EU. For the declaration of conformity, visit www.eufylife.com.
The product shall only be connected to a USB Interface of version 2.0 or higher. Connection to so-called power USB is prohibited.
The adapter shall be installed near the equipment and be easily accessible.
Do not use the Device in extreme temperatures (too high or too low), or expose it to strong sunshine or wet environments.
Suitable temperature range: -20°C to 50°C.
Recommended charging temperature: 5°C to 25°C.
Use only the manufacturer-provided charger. Unauthorized chargers may cause danger and void the warranty.
Charger is for indoor use only. Charger output: 5Vdc/2A.
RF Exposure Information: Maintain a 20cm distance between the device and the human body to comply with RF exposure requirements.
CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO INSTRUCTIONS.
Wi-Fi Operating Frequency Range: 2412~2472MHz (for EU).
This product is designed and manufactured with high-quality materials and components that can be recycled and reused. This symbol ♻️ means the product must not be discarded as household waste and should be delivered to an appropriate collection facility for recycling. Proper disposal and recycling protect natural resources, human health, and the environment.
Industry Canada Compliance
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation.
This Class B digital apparatus complies with Canadian ICES-003.
IC RF Statement:
When using the product, maintain a distance of 20cm from the body to ensure compliance with RF exposure requirements.
FCC ID: 2A0KB-T8420 IC: 23451-T8420
Customer Service
Warranty
12-month limited warranty
Call Us
- United States: +1 (800) 988 7973 (Mon-Fri 9AM-5PM PT)
- United Kingdom: +44 (0) 1604 936 200 (Mon-Fri 6AM-11AM GMT)
- Germany: +49 (0) 69 9579 7960 (Mon-Fri 6:00-11:00)
Email Us
Customer Support: support@eufylife.com
Social Media
- Facebook: @EufyOfficial
- Twitter: @EufyOfficial
- Instagram: @eufyofficial
