Arzum Windream Power AR 063 Stand Fan

Introduction

Thank you for choosing the Arzum Windream Power AR 063 Stand Fan. This manual provides essential information for safe operation, assembly, and maintenance. Please read it carefully and keep it for future reference.

Important Safeguards

• Ensure the fan's voltage rating matches your local power supply.
• This appliance is intended for household use only. Commercial or industrial use is not covered by the warranty.
• Children aged 8 years and above, and persons with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge may use this appliance if supervised or instructed on safe use and understand the hazards involved. Children should not play with the appliance. Cleaning and maintenance should not be performed by unsupervised children.
• Do not use extension cords that supply insufficient current.
• Always disconnect the appliance from the power outlet during assembly, disassembly, maintenance, cleaning, or relocation.
• Never use harsh chemicals or abrasive cleaners for cleaning.
• Never operate the fan if it is not fully assembled or if the plug is damaged.
• Ensure the speed adjustment button is set to "O" before plugging in.
• Place the fan on a stable, flat surface, away from water sources (e.g., bathtubs, swimming pools, showers).
• Never touch moving parts while the fan is operating. Keep hands, hair, clothing, and tools away from moving parts.
• Keep the fan away from small children.
• Never operate the fan with wet hands.
• Do not attach accessories from other fan models.
• Ensure the power cord does not hang down from tables or counters and does not touch hot surfaces.
• Do not use the fan in environments with flammable materials or where fire hazards exist.
• Do not attempt to repair the appliance yourself. Contact Arzum Authorized Service for any repairs or cable replacements. Use only original spare parts.
• Use the fan only for its intended purpose. Do not mount it on a wall or ceiling.

Assembly of Your Arzum Windream Power Stand Fan

Assembly requires a large flathead screwdriver.

Assembly of the Base Attachment

1. Unpack the fan and remove all parts.
2. Place the height adjustment pipe into the hole on the base and fasten the locknut securely. (See Diagram 1)
3. Loosen the height adjustment bracelet, lift the height adjustment pipe to the desired height, and then tighten the bracelet. (See Diagrams 2 & 3)
4. You can adjust the height adjustment pipe by loosening the bracelet. (See Diagram 4)

Note: If the height adjustment pipe is not visible, it may have slid inside the tripod exterior pipe. You can pull it out.

ATTENTION: Ensure the height adjustment ring is fully fastened before assembling the motor section to the stand.

Assembly of the Body on the Base

1. Pass the slot under the body into the tripod exterior pipe and tighten the body connection screw from the back.

ATTENTION: Ensure the height adjustment ring is fully fastened before assembling the motor section to the stand.

Assembly of Grills and Blade

1. Remove the blade fixing nut and grill connection nut.
2. Fix the rear grill and connection nut to the motor shaft, then tighten the nut to secure the back grill.
3. Place the main fan blade onto the hub and engine axle channel. Ensure the blade is aligned with the pin on the engine axle. Then, place the second fan blade onto the engine axle.
4. It is crucial that the blades are seated fully. Improper seating can cause the fan to run inefficiently and potentially damage the product.
5. Use the fan nut to secure the blades.
6. Use the screw to fix the plastic ring until snug.
7. Assemble the ring to the front grill.

Operation of Your Arzum Windream Power Stand Fan

Remote Control

• On/Off: Press this button to turn the fan on. It starts at Speed Level 1. Press again to turn off.
• Speed: Adjusts the fan speed to your preference (1-Low, 2-Medium, 3-High).
• Mode: Selects one of three wind modes:
  • Normal Wind: Provides constant airflow at your selected speed (Low, Medium, or High).
  • Natural Wind: Simulates natural wind patterns with variations from strong to weak, providing a refreshing feel.
  • Sleep Wind: Gradually reduces airflow over a set time and automatically switches off.
• Timer: Press repeatedly to set the operating time in 0.5-hour increments, up to a maximum of 7.5 hours. For example, to set 5.5 hours, press the button until the 0.5, 1, and 4-hour indicators are lit. Do not press the Timer button if you want the fan to run continuously.
• Oscillation (?): Press to activate left-right oscillation for wider air circulation. Press again to stop oscillation.

Control Panel

The buttons on the fan's control panel function identically to the remote control buttons.

Double Blade Feature

The Arzum Windream Power features a double blade system, providing stronger airflow and covering a broader area.

Adjustments

Setting Airflow Angle

You can adjust the fan head upwards or downwards to direct the airflow.

Adjusting Height

Ensure the fan is turned off before adjusting the height. Loosen the height adjustment bracelet, lift or lower the pipe to your desired height, and then tighten the bracelet securely.

Cleaning and Maintenance

• Before cleaning, ensure the fan is turned off and unplugged.
• Wipe the exterior surfaces with a damp cloth and dry thoroughly before use.
• Never use abrasive or harsh cleaning materials.
• Never immerse the appliance in water or any other liquid.
• For repairs or cord replacement, contact Arzum Authorized Services.
• For cleaning the grills and fan blades, they must be disassembled first.

Handling and Shipment

• Keep the appliance in its original packaging during handling and shipment to prevent damage.
• Transport the product in its normal position.
• Do not drop or expose the product to impacts during transport.
• Damage incurred during transport after delivery is not covered by the warranty.

Technical Specifications

WEEE Compliance

This product contains recyclable materials and complies with WEEE directives. Do not dispose of this product as unsorted municipal waste. Please contact your local municipality for the nearest collection point. [WEEE Disposal]

Manufacturer and Importer

Manufacturer: Ningbo Singfun Electric Appliance Co.,Ltd., Fuhai Develop Area, Cixi, Zhejiang, China

Importer: Arzum Elektrikli Ev Aletleri San. ve Tic. A.Ş., Otakçılar Caddesi No: 78 Kat: 1 B Blok No: B1b, Eyüp 34050 İstanbul, Türkiye

Warranty

The product comes with a 3-year warranty from the date of purchase.

For more details on warranty terms and conditions, please refer to the warranty certificate provided with the product.

Visit www.arzum.com for more information.