Crorzar Outdoor 360 Camera Quick User Manual

Included in the Box

The following are included in the box with your purchase:

Main Device: Camera x 1
Accessory 1: Power adapter x 1
Accessory 2: Waterproof cap x1
Screws bag x1

[Image Description: A white outdoor security camera with two antennas, a lens, IR LEDs, microphone, and speaker. It is mounted on a bracket. Below the camera are images of a power adapter, a waterproof cap, and a bag of screws.]

Product Details

Please check the interface and buttons of the camera before using.

[Image Description: A close-up view of the Crorzar Outdoor 360 Camera. Key components are labeled: Dual Antenna, Lens, IR LED, Microphone, Speaker, 4pcs white LED, IR sensor. An arrow points to the bottom of the camera, indicating a screw that needs to be removed to open the hatch for SD card installation.]

How to Download APP

Method 1: Scan the QR Code to download the App.

Method 2: Search for "Crorzar Cameras" in the App Store or "Crorzar Pro" in Google Play Store and download directly.

[Image Description: Two QR codes are displayed. The top QR code is for downloading the App for iOS devices, with an "Available on the App Store" button. The bottom QR code is for downloading the App for Android devices, with a "Get it on Google play" button.]

User Registration & Login

If you have a Facebook ID, you can tap the Facebook icon on the APP interface directly to log in.
You can also create a new account and log in: Click "Sign Up" to register a new account.
Enter a new username and password.
Enter an email address and tap "Get Code". A verification email with a code will be sent to this address. Find the email, get the code, and input it where you just entered the email address, then tap "Sign Up".
Log in using the username and password you just registered.

[Image Description: Screenshots of the Crorzar app's login and registration interfaces. The login screen shows fields for username and password, with options for Account Login, Guest Login, and a Facebook login button. The registration screen shows fields for username, password, confirm password, email, and a "Get Code" button, followed by a "Sign Up" button.]

Configure Network Connection for Camera

Method 1: Through Wi-Fi (Recommended)

After logging in successfully, click the "+" icon in the upper right corner of the app.
Click "Set Up Device Using Wi-Fi".
When the device indicates "wait to be configured", click "Next Step".
Ensure your device is connected to the same Wi-Fi network you want the camera to use.
Enter your Wi-Fi password and click "Confirm".
Make sure the Wi-Fi network is stable and click "Next step".

Note: A 2.4GHz Wi-Fi network is required.

[Image Description: A series of screenshots showing the Wi-Fi setup process in the app. Steps include adding a device, selecting Wi-Fi setup, entering the Wi-Fi password, and confirming. Visual cues indicate checking the Wi-Fi password visibility.]

QR Code Configuration (Part of Wi-Fi Setup)

Push the QR code button in the upper right hand corner to generate a configuration code on your device. Hold this code a few inches from the camera lens for a few seconds to initiate camera setup. Hold the QR code in place until you hear two prompts: "Connecting, please wait" and "Connect to router successfully".

If you do not hear both prompts after 1 minute, press and hold the reset button on the back of your camera for 5-10 seconds until you hear a prompt indicating that the camera is restoring to factory settings. Restart the setup process.

After successful configuration, you will be prompted to set a new password for the device and name it.

[Image Description: A screenshot showing a QR code being displayed on a phone screen for camera configuration, with a progress indicator "connecting, Please Wait". Another screenshot shows the password setting interface, and a third shows the interface for naming the device.]

Method 2: Via LAN Port (Wired Connection)

Note: About wired connection, you need to connect the camera to the router using the LAN cable.

After logging in successfully, click "+" in the upper right hand corner, then click "More", and select "Add device in the same WLAN" from the popup menu.
Ensure your mobile phone is connected to the same Wi-Fi network.
Go to the "Search Device" interface and click on the detected device (e.g., "robot_****").
Click "Add Device" to complete the process.
The device will appear in the device list of the app, displaying "online", indicating that the camera configuration is complete.
Click the play button on the screen to enter real-time monitoring and access settings for wireless network configuration and other operations.

[Image Description: Screenshots illustrating the LAN connection setup. Steps include adding a device via WLAN, searching for the device, and confirming its online status in the device list.]

Method 3: Via AP Mode

Note: Direct connection via AP mode is limited to remote viewing within 10 meters when without network.

Press the "RESET" button 2-5 times shortly on the device. The device will prompt "Entering AP direct connection mode".
Click the "+" icon at the upper right corner of the APP, then click "More" at the upper right. Select the fifth mode "AP mode".
For iOS devices: Click "to set the WIFI".
For Android devices: Search for the device name (e.g., "robot_****").
Input the AP password "1234567890" and add the device to view it.

[Image Description: Screenshots demonstrating the AP mode setup. This includes selecting AP mode, connecting to the device's Wi-Fi hotspot in phone settings, and adding the device in the app.]

Manage Cameras

Multiple cameras can be added to the app and will all show up on the main screen. Long pressing on a camera brings up a menu allowing you to share, set, or delete the camera. You can also access manually recorded events from all your cameras.

[Image Description: The app's main screen showing a list of added cameras (Doorbell, IPC, Outdoor 360, PTZ). A long press on "Outdoor 360" reveals a context menu with options: Share, Motion Settings, Alerts, Settings, Delete, and Cancel.]

View the Camera Through App

After successfully adding the camera to the app, you can achieve real-time monitoring by pressing the "Play" icon. The app provides various functions:

Real-time viewing: Displays the live camera feed.
Enable or disable audio: Control audio for the device.
Start recording manually: Initiate video recording.
View saved pictures and videos: Access recordings stored on the SD card.
Hold to Speak: Press and hold to talk through the camera to people in front of it.
Move your finger on the viewing image: Rotate the camera view.
Setup the mode of LED lights: Configure the camera's LED behavior.
Zoom in or zoom out lens: Adjust the camera's zoom level.
Take a snapshot: Capture a still image of the current view.

[Image Description: The live camera view screen within the app. Controls are shown for Zoom, Focus, recording, snapshot, viewing events, holding to speak, and settings. Arrows indicate how to rotate the camera by swiping and how to access LED light settings.]

Setup the LED Lights

You can access LED light settings by tapping the relevant icon. The Light Mode can be set to White Light, Normal, or Double Light.

White Light: The 4 white LEDs light up when it's dark.
Normal: The IR LED lights up when it's dark, but the white LEDs do not.
Double Light: The IR LED lights up when it's dark, and the white LEDs light up if the camera detects a human.

When choosing the Double Light option, you can also set Sensitivity and Lighting Duration.

[Image Description: Screenshots showing the LED light settings. Options for Light Mode (White Lig, Normal, Double Lig) are displayed. For Double Light, settings for Sensitivity (Low, Middle, High) and Lighting Duration (5s to 120s) are available.]

Camera Settings

You can set up the camera by pressing the "setting" icon, typically found in the upper right corner of the app's viewing screen. This provides access to various configuration options:

Basic Settings
Manage Password
Alert Settings
Manage Storage
Advanced Settings
Network Settings
Device Info

[Image Description: The main Camera Settings screen within the app, listing various categories of settings.]

Basic Settings

Within Basic Settings, you can:

Enable or disable voice prompts (Tone).
Change the device name.
Enable or disable flipping of the image orientation (Flip Upside-Down, Flip Left-Right).
Change the rotation speed of pan/tilt.
Change the device language.
Adjust the Day/Night Sensitivity.
Change the speaker volume.

[Image Description: The Basic Settings screen in the app, showing toggles and selection options for Tone, Device Name, Flip Upside-Down, Flip Left-Right, Device Language, Rotation Speed, Sensitivity, and Speaker Volume.]

Manage Password

This section allows you to set or change your device password. You will need to input the current password, then the new password, and confirm the new password. Press "Save" to finalize the changes.

[Image Description: The "Set Password" screen in the app, with fields for Current Password, New Password, and Confirm Password, and a "Save" button.]

Alert Settings

Configure how the camera alerts you to events:

Motion Activated Alerts: Trigger alarms when motion is detected.
Video Duration(S): Set the duration for recordings triggered by alerts.
Actions on Alerts: Choose what happens when an alert is triggered (e.g., Photos and Videos).
Alarm Schedules: Set specific times for alarms to be active.
Sensitivity: Adjust the sensitivity for motion detection.
Alert Push: Enable or disable push notifications for alerts sent from the camera to your mobile phone.
Ignore Messages: If enabled, the app will not receive alert messages.

[Image Description: The Motion Settings screen in the app, showing options for Motion Activated Alerts, Video Duration, Actions on Alerts, Alarm Schedules, Sensitivity, Alert Push, Ignore Messages, and Intelligent Vigilance.]

Alert Settings - Intelligent Vigilance

Enhance motion detection with Intelligent Vigilance features:

Smart Detection: Enables the camera to detect only human presence for triggering alarms.
Show Traces: Enable this to show the movement paths of detected humans.
Perimeter Alert: Set up a virtual perimeter that triggers an alert if crossed.
Cordon: Define an alerting line and direction for human movement.
Custom Areas: Draw specific areas on the screen where human movement should trigger an alarm.

Tap "Save" after making your selections.

[Image Description: The Intelligent Vigilance settings screen, with toggles for Smart Detection, Show Traces, Perimeter Alert, Cordon, and Custom Areas.]

Manage Storage

Manage how your camera stores recordings:

Storage Capacity: View capacity for Video and Snapshots.
Available Storage: Check the remaining space on the SD card.
At Full Storage: Set the action when the SD card is full (Stop Record or Overwrite).
Format SD Card: Format the SD card.

[Image Description: The Manage Storage screen, showing a circular graphic representing storage usage, with details on Capacity for Video, Capacity for Snapshot, Available Storage, and options for what happens when the SD card is full. A "Format SD Card" button is also present.]

Advanced Settings

Configure advanced recording and video options:

Record Settings:
- Record Switch: Turn on/off video recording on the SD card.
- Duration: Set the duration of video clips recorded on the SD card (e.g., 5 Mins).
- Record Audio: Enable or disable audio recording.
Other Settings:
- Video Quality: Adjust the video quality.
- Video Format: Select the video format (e.g., H265X).

[Image Description: The Advanced Settings screen, showing options for Record Switch, Duration, Record Audio, Video Quality, and Video Format.]

Network Settings

Configure the camera's network connection:

Select the network connection mode for camera: Choose between AP Mode and Routing Mode.
Select an available Wi-Fi network for camera: Choose your Wi-Fi network from the list.

Press "Save" to apply changes.

[Image Description: The Network Settings screen, listing available Wi-Fi networks like ORBI13, MySpectrumWIFI, Zans_2.4, etc., and options for AP Mode and Routing Mode.]

Contact Information

For questions or help, please contact Crorzar:

Phone: 1 (855) 700-2482
Email: cs@crorzar.com
Answers to frequently asked questions, as well as video demonstrations of setting up your camera, can be found at: https://www.crorzar.com/pages/cameras

[Image Description: The Crorzar logo is displayed, followed by contact details.]