Truper Shower Head Installation and Maintenance Guide
Before Installation
Please read this instruction manual before proceeding with the installation.
Installation Requirements
For the product to function correctly, the water pressure must be maintained within a minimum range of 98 kPa (14.2 PSI) to a maximum pressure of 588 kPa (85.2 PSI). This refers to the relationship between the height and the pressure in water tanks, starting from the upper water tank.
Height (h) | Pressure (kgf/cm²) | Pressure (PSI) |
---|---|---|
2 m | 0.2 | 2.8 |
3 m | 0.3 | 4.2 |
4 m | 0.4 | 5.6 |
Each meter of height from the showerhead to the base of the water tank is equivalent to a pressure of 10 kPa (0.1 kgf/cm²) or 1.42 PSI.
Diagram showing water pressure relationship:
A vertical pipe labeled 'A' with markings for height.
Height indicated as *100 cm.
Total height indicated as *220 cm.
Lower section labeled '*120 cm to floor level.
A connection point labeled 'Cuerda 1/2 - 14 NPT'.
A component labeled 'No incluido' (Not included).
*Recommended measurement. Place the showerhead (A).
Note: Use Teflon tape on all threaded connections to prevent leaks.
Installation Options
Note: The telephone-style showerhead can be used as a single unit. If you wish to use it in conjunction with your existing fixed showerhead, you will need a diverter (not included) for its installation.
Installation as a Single Showerhead
Diagram of a single showerhead installation:
1. Arm (not included)
2. Support
3. Showerhead
4. Hose
5. Gaskets
Installation as a Complementary Showerhead
Diagram of a complementary showerhead installation:
1. Arm (not included)
2. Showerhead
3. Hose
4. Gaskets
5. Diverter (not included)
Maintenance
Requires no maintenance.
NOTES: This diagram is for illustrative purposes only and to aid in assembly. The product may differ depending on the model.
Some parts of the showerhead come pre-assembled.
Manufacturer Information
Imported by TRUPER, S.A. de C.V. Parque Industrial 1, Parque Industrial Jilotepec, Jilotepec, Edo. de Méx. C.P. 54257 Made in/Hecho en China, Tel.: 76 1782 9100.
WWW.TRUPER.COM
06-2024
INSTRUCTIVE MUST BE PRINTED ON REGULAR PAPER