Monster Shock Plus Portable Bluetooth Speaker

Product Overview

The Monster Shock Plus portable Bluetooth speaker package includes:

• Speaker
• USB-C Charging Cable
• Lifting rope
• AUX IN Cable
• Quick Start Guide & Warning card

LED Indicator/Voice Prompt Guide

Controls and Ports

• 1. Power On/Off: Long press for 2 seconds to power on/off. Short press for voice assistant.
• 2. Charging Indicator Light
• 3. Previous song/Volume down: Long press for previous song. Short press for volume down.
• 4. Play/Pause: Short press to play/pause. Long press to disconnect Bluetooth. Double click to answer/hang up calls.
• 5. Next song/Volume up: Long press for next song. Short press for volume up.
• 6. Microphone
• 7. Mode switch: Press to switch audio source (USB, Micro SD, AUX).
• 8. AUX Input: Connect external audio devices using audio cables.
• 9. Micro SD card Input: Connect a Micro SD card for storage.
• 10. USB (Audio) Input: Connect a USB storage device for audio playback.
• 11. USB-C Charging: For charging the speaker.

Power and Charging

For optimal enjoyment, fully charge the speaker before use. A USB-C charging cable is included. Use a 5V/1A or above power adapter (not included). Do not use incompatible chargers or charge if the connector or device is wet or damaged.

Power On/Off

Press and hold the Power On/Off Button for 2 seconds to turn the speaker on or off. The speaker will automatically turn off after 5 minutes if no Bluetooth device is connected.

Bluetooth Connection

When first turned on, the speaker automatically enters waiting mode for connection. To connect to a new device, long press the " 4 " button to disconnect the current connection. The speaker will enter pairing mode. Enable Bluetooth on your mobile phone, search for "Monster Shock Plus" and connect. A voice prompt and a solid blue indicator light confirm a successful connection.

Music Control

• Short press " 4 " to play or pause music.
• Long press " 3 " to go to the previous song.
• Long press " 5 " to go to the next song.

Call Mode

• Answer a call: Short press the " 4 " button.
• End a call: Short press the " 4 " button.
• Reject/return a call: Double click the " 4 " button.

Volume Control

• Short press " 5 " to increase volume.
• Short press " 3 " to decrease volume.

Audio Playback Modes

• USB IN (Audio) Playback: When a USB drive is inserted, it becomes the priority playback source. Press the " 7 " button to switch to Bluetooth mode.
• Micro SD Card Playback: When a Micro SD card is inserted, it becomes the priority playback source. Press the " 7 " button to switch to Bluetooth mode.
• AUX IN Playback: When an audio source is connected via AUX IN, it becomes the priority playback source. Press the " 7 " button to switch to Bluetooth mode.

Connect Two Speakers, Stereo Mode (Same Model Only)

1. Turn on two Monster Shock Plus speakers without connecting to any Bluetooth device.
2. Double click the " 7 " button on one speaker twice. The speakers will automatically pair. The main speaker's blue indicator light will flash, and the secondary speaker's blue indicator light will be solid.
3. Enable Bluetooth on your mobile phone, search for "Monster Shock Plus" and connect. A voice prompt and solid blue indicator lights on both speakers confirm successful stereo pairing.
4. To exit TWS pairing mode, double click the " 7 " button again. The blue indicator light will flash.

Voice Assistant

In Bluetooth mode, short press the " 4 " button to activate or deactivate the voice assistant.

Power Saving Settings

In Bluetooth mode, if no device is connected, the speaker will automatically power off after 5 minutes.

Caution

• Do not attempt to replace the battery privately.
• The battery must not be exposed to excessive heat, fire, or similar conditions.

FCC Statement

This equipment complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. If interference occurs, try to correct it by reorienting the antenna, increasing separation between equipment and receiver, connecting to a different outlet, or consulting a dealer or technician.

The device has been evaluated to meet general RF exposure requirements and can be used in portable exposure conditions without restriction.

FCC ID: 2AVD2-MS62122