TSUN Quick Installation Guide

Read Me First

DCU1000 Ports:

• ①: PV Input ☀️
• ②: DC Output ⚡
• ③: WIFI ?
• ④: Power Button ?

Stacking DCU1000 Units: If you have two or more DCU1000 units (maximum 5 units) and wish to stack them, please refer to the accompanying diagrams.

Diagram illustrating the connection of two DCU1000 units stacked vertically, showing how they fit together.

Diagram illustrating the connection of three DCU1000 units stacked vertically, demonstrating a larger system configuration.

Note: Power off all DCU1000 units in the same system before disconnecting any DCU1000 from other units. ⚠️

DCU1000 Packing List

• DCU1000
• PV Connecting Cable
• Microinverter Cable
• Microinverter "Y" Connecting Cable

Connections:

Diagram showing the DCU1000 input and output ports. The input port uses a blue connector, and the output port uses a black connector.

Installation

Balcony Storage System Installation

1. Unscrew the caps of both connectors on the DCU1000 counterclockwise.
2. Illustration shows unscrewing the protective caps from the DCU1000's connectors in a counterclockwise direction.
3. Connect the blue connector to the input port and the black connector to the output port.
4. Illustration shows the blue input connector and black output connector being plugged into the DCU1000.

Important Notes

Please do not expose the device to direct sunlight, rain, or snow. Ensure it is kept in well-ventilated conditions.

Power LED Status:

Press and hold the Power button for approximately 2 seconds, then release to power on the DCU1000.

• 1. Power on, self-test: blinking ?
• 2. No charging and discharging: steady on ?
• 3. With charging, no discharging: 3 seconds on, 1 second off ?
• 4. With discharging, no discharging: 1 second on, 3 seconds off ?
• 5. With charging and discharging: 1 second on, 1 second off ?

WIFI LED Status:

• 1. Not connected to the router: off ?
• 2. Connected to the router but not to the server: blinking every 1 second ?
• 3. Connected to the server: steady on ?

After powering on the DCU1000, please refer to the TSUN Smart APP quick guide and finish the APP setup.

Documentation:

• EU Declaration of Conformity (DOC)
• Full Manual

Read Me First

P1000 Ports:

• ①: PV Input ☀️
• ②: AC Output ⚡
• ③: USB Port ?
• ④: Power Button ?

P1000 Packing List (Optional accessories, not included in DCU1000 package):

• P1000
• PV Connecting Cable
• Quick Guide

Installation

Portable Power Station Installation

Note: For users who have bought P1000 and DCU1000.

1. Illustration shows pressing and holding the power button on the DCU1000 for approximately 2 seconds, then releasing it to power on.
2. Illustration shows pressing the power button on the P1000 to power it on.
3. Diagram shows the sequence of powering on: first the DCU1000, then the P1000.
4. Diagram illustrating the connection of solar panels to the P1000's PV input, with a note indicating a maximum panel power of 600W. ⚠️ Max. panel power: 600W.
5. Illustration shows the P1000 connected to a laptop or smartphone, likely for charging or monitoring.
6. Warning graphic indicating that both the DCU1000 and P1000 must be powered off before disassembling the portable power station. ⚠️ Power off DCU1000 and P1000 before disassembling Portable Power Station.

Warning graphic indicating 'Do not power on DCU1000'. ⚠️

Note on USB Port: The USB port on the P1000 might not be compatible with the USB charging cable of some iPhone models. In this case, please kindly use the iPhone adaptor and plug it into the socket of the P1000.

Documentation:

• EU Declaration of Conformity (DOC)
• Full Manual