Fanling FLV11GCD Bone Conduction Headphones Quick Start Guide
FCC Compliance Information
FCC WARNING: Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- -Reorient or relocate the receiving antenna.
- -Increase the separation between the equipment and receiver.
Connection Instructions: Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.
RF Warning for Portable Device: The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
FCC ID: 2AW3WFLV11GCD
Quick Guide
This section provides a quick guide for the Fanling FLV11GCD bone conduction headphones.
A visual representation of the bone conduction headphones shows the device with labeled components:
- ① Multi-function keys
- ② Cue light
- ③ Charging interface
- ④ MIC
Instructions for Use
First use: Power on - Open the phone's settings - Connect to 'BT-V11'.
| Function | Control |
|---|---|
| Power on/off | ? Press 2s/3s |
| Pause/Play | ⏯️ Single click |
| Answer/Hang up | ? Single click |
| Phone Assistant | ?️ Double click |
| Next Song | ⏭️ Three strikes |
| Last Song | ⏮️ Four strikes |
To increase or decrease the volume, please operate on mobile phones or other equipment.
Specifications
| Music Time | ≈ 5 hour |
| Charging Time | ≈ 2 hour |
| Standby Time | ≈ 7 day |
| Connection Distance | 10 m |
| Speaker Type | Bone Conduction |
Tips for Usage
- For your better experience with this product, please fully charge it before use.
- Please use a DC5V charger and a computer to charge the headset. Do not use DC9V, DC12V, DC24V to charge the headset.
- If this product has been unused for a long time, please recharge it within 2 months to ensure good battery performance.
- After wearing this product, it is recommended to use a dry towel to clean the sweat and water stains on the surface of the product, and leave it for 2 hours to ensure that the charging port is dry before charging the headset to prevent the short circuit of sweat during charging and affecting the service life of this product.
- Long-term high-volume music may cause discomfort. Please try to use a medium or so volume to avoid listening at high volume for a long time.
- Do not throw, press the headset or submerge it in water. Stay away from fire, water and high pressure equipment.
Warranty Information
This product enjoys a free quality guarantee for 12 months from the date of purchase.
Certifications: CE, FC, [Recycling Symbol], [Battery Symbol], [Plug Symbol], [Person Symbol].
Made in China
Qualified Certificate Details
NAME: Bone conduction headphones
CHECKER: Check12
DATE: [Date Placeholder]